Lightolier PA1A7050 User Manual
Top View
13 1/8"
1 3/4"
8"
13"
Depth
8 3/4"
5" L X 5" W Opening
10 3/8" L X 10" W
17"
5
6
7
8
9
10
11
12, 13
14
1
2
3
4
Flanged
Trimless
5"
Calculite®ProSpec
®
Linear Downlight PA1A7050
Page 1 of 2 1 Light AR 70 Series A
Ceiling Cutout: 6 3/16" L x 6 3/16" W
Ordering Information: AR 70 Series A
PA1A705EBL = (Flanged) Black/White
PA1A705EWL = (Flanged) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
PA1A705EBTL = (Trimless) Black
PA1A705EWTL = (Trimless) White
Cat. No. Lamp Ceiling Trim Aperture Finish
PA1A705EBL (1) 50W AR 70 Overlap Black with White Flange
PA1A705EWL (1) 50W AR 70 Overlap White with White Flange
PA1A7053EBTL (1) 50W AR 70 Trimless Black
PA1A705EWTL (1) 50W AR 70 Trimless White
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of diecast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily r
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
diagonal) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL , and CSA requirements.
9. Lampholder: double contact bayonet base with 250°C #18 gauge Teflon
leads.
10. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
.
below
11. Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Cartridge.
Lens Retaining Ring:
12.
13. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing: Die formed 18 ga. steel.
Electrical
Electronic Transformers: Of
frombelow for servicing. 12V Secondary.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
emoved.
.093" spring steel r
eliable operation and ar
fer r
od. Holds accessories in place.
e accessible
®
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
®
Teflon
is a registered trademark of E.I. DuPont.
US Patent Pending
ob Inf
J
ob Name:
J
Cat. No.:
Lamp(s):
Notes:
ormation Type:
Finish
All painted finishes are powder coated baked enamel.
Lightolier a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
ve the right to change details of design, materials and finish.
eser
e r
W
© 2005 Genlyte Gr
oup LLC • B1105
www
.lightolier
.com
Calculite®ProSpec
®
Linear Downlight PA1A7050
Page 2 of 2 1 Light AR 70 Series A
Lighting Performance Data
Aiming Angle: 0° 30° 45° or 60° Horizontal 30° 45° or 60° Vertical
L Beam length
B Beam width
C Distance to center of beam
D Distance
A Aiming angle
FC Foot candles
Lamp data shown is typical, and is based on
bare lamp photometrics. Contact lamp
manufacturers for availability and
performance.
Lamp 0° Aiming Angle 30° Aiming Angle 45° Aiming Angle 60° Aiming Angle
Lamps
50W AR70
SP (T
50W AR70
FL (T-H) 30°
50W AR70
SP GOLD (T
50W AR70
FL GOLD (T-H) 30°
50W AR111
NSP (T-H) 5°
50W AR111
FL (T-H) 30°
Beam Spread
(To 50% CBCP) Life (Hrs.)
-H) 10°
-H) 10°
15000 2000
2000 2000
13500
50000 2000
3000 2000
Rated
CBCP
2000
1800 2000
DFC L W
8’
234 1.4’ 1.4’
104 2.1’ 2.1’
12’
59 2.8’ 2.8’
16’
20’
38 3.5’ 3.5’
4’
125 2.1’ 2.1’’
6’ 56 3.2’ 3.2’
8’
31 4.3’ 4.3’
10’
20 5.4’ 5.4’
8’ 211 1.4’
12’ 94 2.1’ 2.1’
16’ 53 2.8’ 2.8’
20’ 34 3.5’ 3.5’
4’ 125 2.1’ 2.1’’
6’ 56 3.2’ 3.2’
8’ 31 4.3’ 4.3’
10’ 20 5.4’ 5.4’
15’ 222 1.3’ 1.3’
20’ 125 1.7’ 1.7’
25’ 80 2.2’ 2.2’
30’ 56 2.6’ 2.6’
6’ 83 3.2’ 3.2’
8’ 47 4.3’ 4.3’
10’ 30 5.4’ 5.4’
12’ 21 6.4’ 6.4’
1.4’
DC FC L W
7’ 4.0’ 199 1.6’ 1.4’
10’ 5.8’ 97 2.3’ 2.0’
13’ 7.5’ 58 3.0’ 2.6’
16’ 9.2’
3’ 1.7’ 144 2.2’ 1.9’
5’ 2.9’ 52 3.7’ 3.1’
7’ 4.0’ 27 5.1’ 4.3’
9’ 5.2’ 16 6.6’ 5.6’
7’ 4.0’ 199 1.6’ 1.4’
10’ 5.8’ 97 2.3’ 2.0’
13’ 7.5’ 58 3.0’ 2.6’
16’ 9.2’ 38 3.7’ 3.2’
3’ 1.7’ 144 2.2’ 1.9’
5’ 2.9’ 52 3.7’ 3.1’
7’ 4.0’ 27 5.1’ 4.3’
9’ 5.2’ 16 6.6’ 5.6’
10’ 5.8’ 325 1.2’ 1.0’
15’ 8.7’ 144 1.7’ 1.5’
20’ 11.5’ 81 2.3’ 2.0’
25’ 14.4’ 52 2.9’ 2.5’
5’ 2.9’ 78 3.7’ 3.1’
7’ 4.0’ 40 5.1’ 4.3’
9’ 5.2’ 24 6.6’ 5.6’
11’ 6.4’ 16 8.1’ 6.6’
38 3.7’ 3.2’
DC FC L W
5’
5.0’ 212 1.8’ 1.2’
7’
7.0’ 108 2.5’ 1.7’
9’
9.0’ 65 3.2’ 2.2’
11’
11.0’ 44 3.9’ 2.7’
3’
3.0’ 79 3.5’ 2.3’
4’ 4.0’ 44 4.6’ 3.0’
5’ 5.0’ 28 5.8’ 3.8’
6’ 6.0’ 20 6.9’ 4.5’
5’ 5.0’ 191 1.8’ 1.2’
7’ 7.0’ 97 2.5’ 1.7’
9’ 9.0’ 59 3.2’ 2.2’
11’ 11.0’ 39 3.9’ 2.7’
3’ 3.0’ 71 3.5’ 2.3’
4’ 4.0’ 40 4.6’ 3.0’
5’ 5.0’ 25 5.8’ 3.8’
6’ 6.0’ 18 6.9’ 4.5’
8’ 8.0’ 276 1.4’ 1.0’
12’ 12.0’ 123 2.1’ 1.5’
16’ 16.0’ 69 2.8’ 2.0’
20’ 20.0’ 44 3.5’ 2.5’
3’ 3.0’ 118 3.5’ 2.3’
5’ 5.0’ 42 5.8’ 3.6’
7’ 7.0’ 22 8.1’ 5.3’
9’ 9.0’ 13 10.4’ 6.8’
60°
CFCLW
D
5.2’ 208 2.1’ 1.0’
3’
4’
6.9’ 117 2.9’ 1.4’
5’
8.7’ 75 3.6’ 1.7’
6’ 10.4’ 52 4.3’ 2.1’
1’
1.7’ 250 2.7’ 1.1’
2’ 3.5’ 63 5.5’ 2.1’
3’ 5.2’ 28 8.2’ 3.2’
4’ 6.9’ 16 10.9’ 4.3’
3’ 5.2’ 188 2.1’ 1.0’
4’ 6.9’ 105 2.9’ 1.4’
5’ 8.7’ 68
6’ 10.4’ 47 4.3’ 2.1’
1’ 1.7’ 225 2.7’ 1.1’
2’ 3.5’ 56 5.5’ 2.1’
3’ 5.2’ 25 8.2’ 3.2’
4’ 6.9’ 14 10.9’ 4.3’
5’ 8.7’ 250 1.8’ 0.9’
8’ 13.9’ 98 2.6’ 1.4’
11’ 19.1’ 52 3.9’ 1.9’
14’ 24.2’ 32 4.9’ 2.4’
2’ 3.5’ 94 5.5’ 2.1’
3’ 5.2’ 42 8.2’ 3.2’
4’ 6.9’ 23 10.9’ 4.3’
5’ 8.7’ 15 13.7’ 5.4’
3.6’ 1.7’
e based on bare lamp photometrics. Dashed lines in beam spreads
Data ar
indicate narrow axes of oval shaped beams.
FC is initial footcandles at center of beam.
L and W are to the point that the candlepower drops 50% of maximum.
Job Information Type:
.lightolier
Lightolier a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
ve the right to change details of design, materials and finish.
eser
e r
W
© 2005 Genlyte Gr
oup LLC • B1105
www
.com
Loading...