Lightolier Lytecel LC, Lytecel L1 User Manual

Lightolier

45 INDUSTRIAL WAY, WILMINGTON, MA 01887

INSTALLATION INSTRUCTIONS FOR LYTECEL (Both LI and LC)

1

© Lightolier 2003 59-31123-000 Printed in U.S.A.

ACCESS PLATE
Remove Access Plate by sliding Access Plate
in the direction of Arrow 1. To remove, lift up
and slide in the direction of Arrow 2. Bend
Fixture Tab up out of body and make ground
and ballast connections. Bend Fixture Tab
back to original position. Replace Access
Plate by reversing removal instructions.

CONTINUOUS ROW COUPLER (LC UNITS
ONLY) Remove screw as shown. Rotate
Continuous Row Coupler (both sides of

2

INSTALL FIXTURES onto T-bars as shown.

3

Access
Plate

Access
Plate
Opening

Fixture
Ta b

Ground
Screw

Access
Plate
Opening

Ta b

1.

2.

Access
Plate
Opening

T-bar

Fixture

T-bar

Screw

Hold­down Clip

Continuous
Row Coupler

HOLD-DOWN CLIPS (LI UNITS ONLY)
Install Hold-down Clips at beginning and end
of rows.

4

Fixtures

Continuous
Row Coupler

Hold­down Clip

T-bar

Screw

Hold­down Clip

Screw

To open Louver,
press Spring Latch
in direction of
Arrow. To close,
insert louver into
Fixture until
Spring Latches
automatically
engage.

5

Fixtures

Fixtures

Fixtures

Spring
Latch

Fixtures) and secure Fixtures together with
Screw. Tighten all Screws to secure Fixtures
to T-bar with Hold-down Clips.