Lightolier Lytecaster 1085 Specification

Lytecaster
®
Recessed Downlighting 1085
Page 1 of 2 5" Aperture Basic Wall Washer Reflector Trim
1085/1004IC/N
0
Non-IC only
1085/1002P1 Series
Standard Incandescent
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Convertible
7 1/2"
6 7/8"
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
LED
1085
Perma White
Frame-In Kit Installation Type Lamping Height
1001LED 1001LEDEM 1000LEDREM L56LED
Frame-In Kit Ceiling Typ e Lamping Height
1000P1 1002P1 1003R
1000IC 1000AICM 1004ICX/N
Non-IC Non-IC EM Non-IC Remodeler Non-IC Retrofit
Incandescent
Non-IC Non-IC Non-IC Remodeler
IC AirSeal® IC AirSeal® IC
LED LED LED LED
60 W A19 6 7/8 "
40 W A19 7 5/16"
6 7/8" 6 7/8" 6 7/8" 6 7/8"
6 7/ 8 "
7 5/16" 7 1/4"
Frame-In Kit Ceiling Typ e Lamping Height
1001F13U Series
1001F18U Series
1004F13 Series
1004F18 Series
1004F26 Series
1001F13ICU/N
1001F18ICU/N
UniFrame™ Non-IC
UniFrame™ Non-IC
IC (1) Quad/Triple 13W (GX24q-1) 7 1/2"
IC (1) Quad/Triple 18W (GX24q-2) 7 1/2"
IC (1) Quad/Triple 26W (GX24q-3) 7 1/2"
Performance IC(1) Triple 13W (GX24q-1) 7 1/4"
Performance IC(1) Triple 18W (GX24q-2) 7 1/4"
1085/1003R
0
Remodeler Ring
Fluorescent
(1) Triple 13W (GX24q-1) 6"
(1) Triple 18W (GX24q-2) 6"
Non-IC
1004IC/N 1004ICR 1004SIC/N 1004SICR
Non-IC Non-IC Remodeler
Shallow Non-IC Shallow Non-IC Remodeler
Features
1. Reflector: Hydroformed aluminum, .040" thick (18 ga.) non-yellowing
resistant, scratch resistant Perma White finish, 88% reflectance; provides smooth wash of light over wall surface without scallops or shadows; white trim flange.
2. Aperture Plate: Molded high heat polymer white finish.
3. Frame-In Kit: (1002P1 standard frame shown). Other frames listed above
and shown on the right. See Frame-In Kit specification sheets for more details.
Options & Accessories
Spread Lens: L56W WLENS - Proprietar y spread lens for use with
combination of wall washer optics and LED Frame-In Kits.
Lightolier is a Philips group brand
40 W A19 7 1/2"
7 1/2" 5 1/2" 5 1/2"
1910XFH1
Conversion Kit
(1) Quad 13W (GX23-2) 7 1/2"
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s): Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011Philips Group • O1111
Lytecaster
®
Recessed Downlighting 1085
Page 2 of 2 5" Aperture Basic Wall Washer Reflector Trim
LIGHTING DATA
EXAMPLE: Multiple 60W A19 units, located 2' from wall and 2' on center, provided illumination on the wall 3' down from the ceiling of 10 f.c. beneath and 10 f.c. between the fixtures.
Footcandle values are averaged and rounded off and are based on a minimum of five units. For fixture-to-wall distance, other than those shown, use maximum of 1 of 1 spacing (distance between fixtures not more than distance to wall) for best results. To convert lighting data for a lower wattage incandescent lamp of the same type, multiply the footcandle values by the ratio of the lumens of the two lamps.
Lightolier is a Philips group brand
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • N0708
Loading...