Lytecaster
®
Recessed Downlighting 1024
Page 1 of 2 5" Aperture Cratere Dome Diffuser Reflector Trim
6 3/4"
1024/1003R
0
Remodeler
7 1/2"
7 1/2"
1024/1002P1 Series
Standard Incandescent
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
LED
1024
Cratere
Frame-In Kit Installation Type Lamping Height
1001LED
1000LEDREM
L56LED
Frame-In Kit Ceiling Type Lamping Height
1002P1
1003R
1000P1
1000IC
1000AICM
1004ICX/N
1004IC/N
1004ICR
1004SIC/N
1004SICR
Non-IC
Non-IC Remodeler
Non-IC Retrofit
Incandescent
Non-IC
Non-IC
Remodeler
Non IC
IC
®
AirSeal
IC
®
AirSeal
IC
Non-IC
Non-IC
Remodeler
Shallow Non-IC
Shallow-Non-IC
Remodeler
LED
LED
LED
75W A19 6 3/4"
40W A19 7 5/16"
40W A19 7 1/2"
6 3/4""
6 3/4"
6 3/4"
6 3/4"
6 7/8"
7 5/16"
7 1/4"
7 1/2"
5 1/2"
5 1/2"
Frame-In Kit Ceiling Type Lamping Height
1001F13U Series
1001F18U Series
1001F26U Series
1004F13 Series
1004F18 Series
1004F26 Series
1001F13ICU/N
1001F18ICU/N
1001F26ICU/N
1001FDICMX1/N
1001FDICMX2/N
1910XFH1
™
UniFrame
UniFrame
UniFrame
IC (1) Quad/Triple 13W (GX24q-1) 7 1/2"
IC (1) Quad/Triple 18W (GX24q-2) 7 1/2"
IC (1) Quad/Triple 26W (GX24q-2) 7 1/2"
Performance IC (1) Quad/Triple 13W (GX24q-1) 7 1/4"
Performance IC (1) Quad/Triple 18W (GX24q-2) 7 1/4"
Performance IC (1) Quad/Triple 26W (GX24q-3) 7 1/4"
Performance IC
Advance Mark 10
Dimming 120V
Performance IC
Advance Mark 10
Dimming 277V
Conversion Kit (1) Quad 13W (GX23-2) 6 3/4"
Non-IC (1) Quad/Triple 13W (GX24q-1) 5 7/8"
™
Non-IC (1) Quad/Triple 18W (GX24q-2) 5 7/8"
™
Non-IC (1) Quad/Triple 26W (GX24q-3) 5 7/8"
7 1/2"
™
Non-IC
1024/1004IC/N
0
Non-IC only
Fluorescent
(1) Quad/Triple 26W (GX24q-3) 7 1/4"
(1) Quad/Triple 26W (GX24q-3) 7 1/4"
™
Convertible
1024/1004ICR
0
Convertible
Remodeler
Non-IC only
™
Features
1. Reflector: Hydroformed aluminum, .040" thick (18 ga.); Anobrite® (anodic-
processed) semi-specular finish for permanent reflectivity.
2. Diffuser: Textured, double-etched glass; twists tightly to reflector trim.
Neoprene gasket (captive on flange of reflector) seals unit under pressure
of twist lock. Concealed wire-hinge supports glass enclosure for quick, safe
relamping.
3. Frame-In Kit: (1002P1 standard frame shown) Other frames listed above and
shown on the right. See Frame-In Kit specification sheets for more details.
Meets NEC® requirements for spas and hot tubs.
Options & Accessories
Retaining Clips: 1955 - For installing in existing ceiling
Labels
UL (Suitable for Wet Locations - Covered Ceiling Only), I.B.E.W.
NEC® is a registered trademark of the National Fire Protection Association.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • K1007
®
Lytecaster
Lytecaster
Page 2 of 2 5" Aperture Cratere Dome Diffuser Reflector Trim
Page 2 of 2 5" Aperture Cratere Dome Diffuser Reflector Trim
®
Recessed Downlighting 1024
Recessed Downlighting 1024
Use quick calculator chart to determine the spacing of 75W A19 units for a desired level of
illumination.
Use quick calculator chart to determine the spacing of 1 Lt. 13 Watt Quad Tube units or a
desired level of illumination.
To convert lighting data for a lower wattage incandescent lamp of the same type, multiply the
footcandle (or candlepower) values by the ratio of the lumens of the two lamps.
The coefficients of utilization remain the same.
Job Information Type:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • K1007
Loading...