LX Series
STEEL COMBINATION LED EXIT
Page 1 of 2
LX12L1RW2H
6.8"
(17.3 cm)
12. 5"
(31.8 cm)
22.5"
(57.2 cm)
4.8"
(12.2 cm)
2.5"
(6.4 cm)
2.0"
(5.1 cm)
12. 5"
(31.8 cm)
Features
Illumination: Illumination
of the exit stencil face is
accomplished with either
red or green high-output
Light Emitting Diodes (LEDs).
Hot spots and striations are
eliminated by a combination
of indirect and direct aiming
points covering the exit stencil
face. Units are furnished with
two 6 VDC, 5.4 W side-
mounted lamp heads utilizing
a high-intensity tungsten T-5
wedge base lamp.
Housing: Constructed of
three-piece, 20 gauge, cold
rolled steel. White powder
coat finish is standard, black
is optional. NFPA-compliant
field-selectable chevrons.
Universal knockouts located
on the backplate allow for
wall mounting directly to
standard junction boxes. A
mounting canopy is provided
for top mount applications.
Slide-in/slide-out front and
back stencils simplify single-to-
double face conversions in the
field. Side-mounted lamp heads
are fully adjustable and are
shipped completely assembled.
Operating Temperature
Range:
65°F (19°C) to 85°F (30°C)
Electronics: 120/277 VAC
dual voltage input with surge-
protection, solid-state circuitry
provides for a reliable charging
system. Charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Electrical Specifications:
Red and Green:
0.090 A (120 VAC)
0.039 A (277 VAC)
Job Information Type:
Job Name:
Cat. No.:
Code Compliance
UL 924 listed. NFPA 101,
NEC, BOCA, OSHA and IBC
illumination standards.
Warrant y
Three year full electronics
warranty. One year full plus
four year prorated lead calcium
battery warranty.
Notes:
STEEL COMBINATION LED EXIT
Ordering Information
LX
Series
LX = LX Serie s
Heavy Duty Steel
Combination Exit /
Emergency Unit
Accessories (order as a separate item)
XCKITW = Canopy Kit, White
XPKITW = Pendant Kit, 12”, White Finish
WG = Wire Guard for Combination Exit/Emergency
Note
1) Some option combinations may impact UL listing. Consult factory for specif ics.
Battery
12L = 12 W Capacity
30L = 30 W Capacity
# of Faces
1 = Single
2 = Double
Letter Color
R = Red
G = Green
Housing Color
B = Black
W = White
Lamp Heads
NH = No Heads
1H = One Head
2H = Two Heads
LX Series
Page 2 of 2
Factory Installed Options
BF = Buzzer/Flasher (emergency units only)
BZ = Buzzer (emergency units only)
EX = Special Input Transformer (specify voltage
and frequency)
FA = 24 VDC Fire A larm Inter face
FL = Emergency Flasher
SW = Special Wording (consult factor y)
1
Philips Lightolier
e: lol.webmaster@philips.com
t: (508) 679-8131
w: www.lightolier.com
LX Combo Series September 1, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.
Job Information Type:
Loading...