Lightolier LT User Manual

LT Series LED Exit Sign LT

Page 1 of 1 AC Only or Emergency Operation Thermoplastic Housing

The LT Series Thermoplastic LED Exit is a compact exit sign that blends with modern interiors with its softly rounded corners and universal mounting configuration.
The LT Series is extremely easy to install, and provides years of low cost, efficient service.

Front View

13.75”

(35.0 cm)

Complete Fixture consists of base exit sign. Select options and accessories below.

Side View

9.5”

(24.1 cm)

1.66”

(4.2 cm)

Canopy

7.3”

(18.5 cm)

5.05”

(12.8 cm)

How to Specify:

LT

SERIES BATTERY STENCIL LETTER STENCIL FACE/
FACES COLOR HOUSING COLOR

LT = Thermoplastic

LED Exit

N = Nickel Cadmium

A = AC Only

1 = Single

2 = Double
U = Universal

R = Red

G = Green

W = White

B = Black

.60”

(1.5 cm)

Features

1. Illumination: Illumination is accomplished with long lasting, high output

Light Emitting Diodes (LEDs).

2. Housing: Constructed of impact resistant, UL 94 V-0, 5 VA white ther-

moplastic (black is optional). NFPA-type field selectable chevrons can be
installed/removed from outside the exit housing. Housing design simplifies
installation, and does not require hard wire terminations inside of the exit
housing.

3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-

state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.

4. Battery: Maintenance free, sealed nickel cadmium bat ter y has an estimated

service life of 10 years, and an operating temperature range of 20°F (-7°C) to
95°F (35°C).

5. Input Power Requirements: AC Only - Red: .89 W; Green: 2.17 W
Emergency Operation - Red: 3.62 W; Green: 2.79 W

Code Compliance

UL 924 listed.

Options

SD = Self-Diagnostics
BZ = DC Buzzer (Emergency operation only)
BF = Buzzer/Flasher (Emergency operation only)
DL = UL Damp Location Listing
ST = Special Input Transformer (Specify voltage & frequency)
FA = 24 VDC Fire Alarm Interface (reg. constant DC voltage)
FL = Flasher (Emergency operation only)
SW = Special Wording/Graphics (Consult factory)
2CKT1 = 120 VAC Two Circuit
2CLT 2 = 277 VAC Two Circuit

Lightolier is a Philips group brand

Options (continued)

DC12 = 12 VDC Remote Emergency Power
TP = Tamperproof Screws (Requires TPTOOL)
VRS = Vandal Resistant Lens
LP = Low Level Matching Thermoplastic Remote Exit
LL = Low Level Institutional Frame Surface Mt. Remote Exit

Multiple option configurations may void UL listing. Consult factory for specifics.

Accessories

SPKIT12WH(BK) = 12” Pendant Kit, White (Black)
WG4 = Wall Mount Exit Wire Guard
WG10 = Side Mount Wire Guard
PCS1 = Polycarbonate Vandal Shield

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • E0308