Lightolier LSW4232120SO User Manual

DIMENSIONS

4"

(102mm)

6"

(152mm)

7-1/2" (191mm)

4"

(102mm)

6"

(152mm)

24"

(610mm)

47-15/16
(1218mm)

23-15/16"

(608mm)

3-7/8"
(98mm)

6"

(152mm)

LSW SURFACE/WALL LSW SERIES

Page 1 of 2 CEILING OR WALL MOUNTED FLUORESCENT, 6" WIDTH, 3 7/8" DEEP,

24", 48" NOMINAL LENGTHS, 1 OR 2 LAMPS T8 OR T12

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 SECTION 4A/Folio I30-12 REV. A

FEATURES

• For ceiling or wall mounted applications.

• Can be vertically or horizontally mounted on wall.

• Only 3 7/8" deep, meets Americans with Disabilities Act for wall
mounted fixtures.

• Low brightness .125 thick linear prismatic virgin acrylic refractor.

• Invisible spring steel latches align refractor to housing.

• 20 gauge cold rolled steel post painted baked white enamel end caps.

• Nominal 2' and 4' lengths.

• 73.9% efficient (T8 lamps).

PHOTOMETRY MODEL NO. LSW4232120SO

coefficients of utilization — zonal cavity method (effective floor cavity reflectance 0.20)

RF 20 20 20
RC 80 50 30

RW 70 50 30 50 30 10 50 30 10

1817673 676562 626058
2736661 585451 545148
3665851 514642 474340
4615144 464036 423834
5564639 413531 383329
6514134 373127 342926
7483730 332824 312623
8443427 312521 292420
9413125 282319 262218

10 39 29 23 26 21 17 24 20 17

visual comfort probability (rated lumens per lamp 3150.)

room size ceiling height ceiling height
W L 8.5 10.0 13.0 16.0 8.5 10.0 13.0 16.0
20 20 40 47 58 69 30 39 53 66

20 30 35 40 46 56 20 27 35 48
20 40 33 36 41 47 15 20 26 35
20 60 32 35 38 42 11 15 19 26

30 20 38 45 55 66 32 40 51 64
30 30 32 37 43 52 22 27 35 46
30 40 30 33 38 43 16 20 26 33
30 60 29 32 34 39 12 15 19 25
30 80 29 31 33 37 10 12 15 20

40 20 38 45 53 64 34 42 52 63
40 30 31 36 42 51 24 29 36 46
40 40 29 32 36 42 18 22 26 33
40 60 27 30 32 37 13 16 19 25
40 80 27 30 31 35 10 13 15 20
40 100 27 30 31 34 9 11 13 16

60 30 31 36 41 49 25 31 37 47
60 40 28 31 35 41 19 23 27 34
60 60 26 29 31 35 14 17 20 25
60 80 25 28 29 33 11 14 16 20
60 100 25 27 29 32 9 11 13 17

100 40 28 31 34 40 23 27 30 37
100 60 25 28 30 34 16 20 22 27
100 80 24 26 28 32 13 16 18 22
100 100 23 26 27 30 11 13 15 18

room cavity ratio

luminaries lengthwise

luminaries crosswise

ORDERING INFORMATION

Explanation of Catalog Number. Example: LSW4232120SOEM

LSW

Surface/Wall

Fluorescent

LAMP QUANTITY:

1 or 2 Lamps

VOLTAGE:

120 or 277

FIXTURE
LENGTH:

2=24"
4=48"

LAMP:

(By Others)

17=T8, 2' Length
20=T12, 2' Length
32=T8, 4' Length
34=T12, 4' Length

BALLAST:

1 & 2 Lamp Mag. T12 LE
Standard Electro Magnetic
(20 or 30 watts only)

P

<20THD <10THD

1 or 2 Lamp Elec. T8 SO* H

I*

LOL Dimming T8 PS –
*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS:

Add appropriate

suffix to

catalog no.,

ie: (EM)

OPTIONS & ACCESSORIES

IN-LINE FUSING: Internal fast blow fusing. SUFFIX: GMF.

Internal slow-blow fusing, SUFFIX: GLR.
RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per fixture
standard, SUFFIX: RF.
EMERGENCY POWER PACK: Factory installed emergency power pack includes

charger and inverter concealed in fixture channel. Upon loss of AC power, oper­ates one lamp at reduced light. SUFFIX: EM.
COLD WEATHER BALLAST: Cold weather ballast — 0°F starting. SUFFIX: CW.
For ON/OFF SWITCH: Consult factory.
STEM AND CANOPY SETS: Suspends fixture 6",12", 18" or 24" from surface.
CATALOG NUMBER: ASC6 CSP (6")

ASC12 CSP (12")
ASC18 CSP (18")
ASC24 CSP (24")

SPECIFICATIONS

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel.

SPECIFICATIONS (continued)

Refractor–one-piece virgin acrylic. End Caps — 20 gauge cold rolled steel.
FINISH: Chassis exterior — white baked acrylic enamel.
End Caps and Cover: Post painted baked white enamel, 86% reflectance.

Phosphate undercoating.
REFRACTOR: Low brightness .125 thick linear prismatic, extruded prismatic
virgin acrylic.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB.
If K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W. UL and C-UL.

G97001
LSW4232120SO

LER = FP - 62.9 WATTS - 59.1 BF - 0.88
Comparative yearly lighting cost per 1000 lumins = $4.06

ADVANCE RIC2S32TP SOLID STATE
OCTRON BALLAST

LSW

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 SECTION 4A/Folio I30-12 REV. A

Job Information Type:

LSW SURFACE/WALL LSW SERIES

Page 2 of 2 CEILING OR WALL MOUNTED FLUORESCENT, 6" WIDTH, 3 7/8" DEEP,

24", 48" NOMINAL LENGTHS, 1 OR 2 LAMPS T8 OR T12