Lightolier LPTC User Manual
Auxiliary Power Transfer Circuit LPTC
Page 1 of 1 For Use with Fluorescent Lighting Ballasts
8.0”
(20.32 cm)
1.1”
(2.79 cm)
1.17”
(2.97 cm)
Complete Fixture consists of base unit.
How to Specify:
LPTC
Model
Series
LPTC = Auxiliary
Power Transfer
Circuit
General Description
The Auxiliary Power Transfer Circuit is designed to transfer generator or AC
systems power to AC fluorescent lighting ballasts in the event of a utility power
failure. This transfer function occurs independent of wall switch position. One
LPTC device is required per lighting fixture. The LPTC is UL 924 listed for use in
damp locations in a temperature range of 32°F (0°C) to 131°F (55°C).
Features
1. Illumination: Emergency illumination is provided to designated fluorescent
fixtures by transferring backup generator or inverter power to the AC ballast.
The designated emergency fixture can be locally switched, and will provide
full rated light output when operating from emergency power.
2. Housing: Housing and cover are constructed of 24 gauge galvanized steel.
Low profile housing allows mounting in most low profile fluorescent fixtures
with low profile AC ballast.
3. Installation: The APTC is designed to be factory or field installed in the fixtures ballast channel or mounted on top when using the supplied end cap.
4. Electronics: 120/277 VAC dual input voltage with all inputs fused to 3
amps.
5. Electrical Specifications: 120/277 VAC - .27mA - 1.48 watts, All inputs
fused to 3 amp
Job Information Type:
Job Name:
Cat. No.:
Warranty
Electronics: 5 years full
Code Compliance
UL 924 “Auxiliary Power and Lighting Equipment” listed, Damp location listing
standard from 32°F (0°C) to 122°F (50°C), NFPA 101
Suitable for installation in sealed or gasketed compartments.
Lightolier is a Philips group brand
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • C0308
Loading...