Lightolier LLC2 User Manual

LLC2 Series

COMBINATION THERMOPLASTIC LED EXIT

Page 1 of 2

LLC2UR

15.62"

(39.7 cm)

21.62"

(54.9 cm)

(2.5 cm)

(41.4 cm)

1.0"

16.3"

4.63"

(11.8 cm)

5.9"

(15.0 cm)

10.12"

(25.7 cm)

Features

Illumination: Emergency

illumination is provided by

two high-performance lamp

reflector systems integral to

the product housing. Each lamp

head can be positioned on

top, side or “in-between.” The

standard lamp reflector system

incorporates a high-intensity

5.4 W, T-5 wedge base

tungsten lamp. Illumination of

the exit face is accomplished

with long-lasting, high-output

Light Emitting Diodes (LEDs)

without hot spots or striations.

Housing: Impact-resistant, UL

94 5 VA thermoplastic housing

with NFPA-compliant field-

selectable chevrons. Chevrons

can be installed/removed

from outside the exit housing.

Thermoplastic backplate

is provided with mounting

knockouts for easy installation

to standard junction boxes.

Installation is further simplified

by the use of snap-together

backplate and housing. Canopy

is furnished with all models.

Operating Temperature

Range: Damp Location

50°F (10°C) to 104°F (40°C)

Electronics: 120/277 VAC

dual voltage input with surge-

protection, solid-state circuitry

provides for a reliable charging

system. Charging system is

complete with low voltage

disconnect, AC lockout,

brownout protection, AC

indicator lamp and test switch.

Electrical Specifications:

Re

d:

0.027 A (120 VAC)

0.012 A (277 VAC)

Green:

0.030 A (120 VAC)

0.013 A (277 VAC)

Job Information Type:

Job Name:

Cat. No.:

Code Compliance

UL 924 and UL damp location

isted. NFPA 101, NEC, BOCA,

l
OSHA and IBC illumination

standards.

Warrant y

Three year full electronics

w

arranty. One year full plus

four year prorated lead calcium

battery warranty.

Notes:

COMBINATION THERMOPLASTIC LED EXIT

Ordering Information

LLC2

Series

LLC2 = LLC Series
II Combination
Emergency Exit

Note

1) 12R not available with SD. For remote lamp heads, see remote heads specification sheet.

2) 12R only available in white housing.

U

Stencil Faces

U = Universal

Letter Color

R = Red
G = Green

Stencil Face/Housing Color

B = Black
W = White

LLC2 Series

Factory Installed Options

SD = Self-Diagnostics
12R = 12 W Remote Capabilit y

Page 2 of 2

1,2

Philips Lightolier
e: [e-mail]
t: [phone]
w: www.lightolier.com

LLC2 Series September 11, 2012

Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012. All rights reserved.

Job Information Type: