Lightolier LLACSW User Manual
Lytespan Lighting LLACSW
8
13
2
1
5
12
9
6
7
5" (129mm)
4-1/2" (114mm)
2-5/8" (65mm)
11
3
19-1/4" (489mm)
21-7/8" (576mm)
10
1-7/8" (46mm)
3-1/8" (80mm)
2" (51mm)
4
Isometric View
Page 1 of 2 ColorWash LED Surface Wall-Washer
Catalog No. Finish Specifications Mounting
LLACSWWH
LLACSWBK
LLACSWAL
White
Black
Aluminum
120V - 60Hz Portable luminaire not recommended for grid ceiling only. Designed for other
Features
1. Power Control Module: Ex truded aluminum. High power factor power
supply unit. Thermally protected, Class 2, short circuit protection. Solid
state controller and driver. Providing power and data to accurately control
LED array. Thermally protected.
2. Synchronizer: Printed circuit board (PCB) mounted. With a sensitive capter
and audible captation fo rthe 4 button controller.
3. 4-Button Controller: 4 button interface allows selection of light show
and variation of intensity. Molded polycarbonate. Digital.
4. DMX Connector: Two RJ45e jacks mounted on printed circuit board (PCB),
for DMX connection and an exit for daisy chain mounting. Uses standard
CAT5 round 8 conductor stranded twisted pair shielded network cables.
5. Pivot w/Lock: Die-cast aluminum. Adjusts the aiming angle up to 120°
with a locking screw, using a 3/16" Allen key tool.
6. LED Optic Housing: Extruded aluminum. Integral heat sink and color
mixing chamber.
7. LED Array: 48 High-power linear lighting emitting diodes (LED) red, green,
blue and amber (RGBA). Thermally protected with color sensor for accurate
color adjustment over life.
8. LED Optics: Asymmetrical MicroBlend technology ensures smooth
washing and color uniformity and minimizes undesirable color fringing.
9. Lens: Tempered glass, fine prisms provide additional mixing at the
aperture and minimizes the appearance of the individul RGBA sources.
10. Wiring: 10 amperes SVT 2 wire cord with grounded plug. 8 feet.
11. ON/Off Switch: Rocker switch to disconnect power to the power supply unit.
12. Splice Door: 18 gauge steel. 7/8" (222.3 mm) K.O. accepts 3/8" low
profile connector for hardwiring in continuous row for flexible conduit.
Two connectors are included in the luminaire.
ceiling types, floor or wall (vertical and horizontal).
Features (continued)
13. Mounting Bracket: 14 Gauge steel. Pivots 360° to permit any type of
mounting with aligning features for accurate positioning.
Dimming
Not compatible w/dimmers.
Finish
All painted finishes are baked powder or enamel.
Labels
cULus, Suitable for damp locations.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • C0708
Lightolier is a Philips group brand
Lytespan Lighting LLACSW
600
30°
60°
450
300
150
1
2
3
4
5
6
7
8
LIGHTOLIER
LYTEMODEÆ DMX
Control System
Strand Lighting
Accent DMX
DMX512 Out
DMX512 In
DMX512 Out
To Next Luminaire
or
RJ45 DMX Terminator
(Required to terminate
the last luminaire in the
same data line)
Entertainment
Technology
DMX Control
OPTIONS
DMX512
Systems*
RJ45 jacks
Color-Changing Adjustable Wall Washer
120VAC 50/60HZ. Power Input
120VAC 50/60HZ. Power Input
DMX512 In
RJ45 jacks
Shielded CAT5 (8) wires round cable with RJ45 connectors (by others) CAT5 (8) wires round cable with RJ45 connectors (by others)
Option
Option
Option
Input Power
120 - 240VAC 50/60HZ.
120VAC 60 HZ.
Power Input
XLR-5(Femal port)
MARQUEEÆ PC DMX INTERFACE
USB Port to PC
DMX512 Cable
Compatible DMX controls by Lightolier Controls www.lolcontrols.com
Lightolier or other
Standard DMX512
Interface Control
1-7/8" (46mm)
3-1/8" (80mm)
2" (51mm)
4
1-7/8" (46mm)
3-1/8" (80mm)
2" (51mm)
4
LLACSW
Page 2 of 2 ColorWash LED Surface Wall-Washer
Lighting Data (All data is based on 3000K color temperature and 45º tilt)
Example: With multiple units
Color Temperature: 3000K
Max. Tilt: 45º
Repor t No: 22906
2' Fro m Wall - Single 2' Fro m Wall - 2' On Center 2' Fro m Wall - 3' On Center 2' Fro m Wall - 4' On Center
1 1 12 56 12 1 1 84 83 84 1 64 48 64 1 59 25 59
2 2 17 49 17 2 2 87 87 87 2 61 56 61 2 53 34 59
3 2 12 26 12 2 3 57 57 57 3 38 38 38 3 31 26 31
4 2 7 12 7 2 4 31 31 31 4 21 21 21 4 16 15 16
5 1 4 5 4 1 5 18 18 18 5 12 12 12 5 9 9 9
6 1 2 3 2 1 6 11 11 11 6 8 7 8 6 5 5 5
7 1 1 1 1 1 7 8 8 8 7 5 5 5 7 4 4 4
8 1 1 1 1 1 8 6 6 6 8 4 4 4 8 3 3 3
9 0 1 1 1 0 9 4 4 4 9 3 3 3 9 2 2 2
3' Fro m Wall - Single 3' Fro m Wall - 3' On Center 3' Fro m Wall - 4' On Center 3' Fro m Wall - 5' On Center 3' From W all - 6' On Center
1 2 10 25 10 2 1 34 32 34 1 28 20 28 1 27 13 27 1 26 8 25
2 3 13 27 13 3 2 41 41 41 2 33 28 33 2 30 19 30 2 28 13 28
3 3 13 23 13 3 3 40 40 40 3 30 29 30 3 26 21 26 3 25 15 25
4 3 10 15 10 3 4 31 31 31 4 23 23 23 4 19 18 19 4 17 13 17
5 3 7 9 7 3 5 22 22 22 5 16 16 16 5 13 13 13 5 11 10 11
6 2 4 5 4 2 6 15 15 15 6 11 11 11 6 9 9 9 6 7 7 7
7 2 3 3 3 2 7 10 10 10 7 7 7 7 7 6 6 6 7 5 5 5
8 1 2 2 2 1 8 7 7 7 8 5 5 5 8 4 4 4 8 3 3 3
9 1 1 1 1 1 9 5 5 5 9 4 4 4 9 3 3 3 9 3 3 3
located 3' from wall and spaced
4' on center, the illumination on
the wall 3' down from ceiling
will be 30 f.c. beneath units
and 29 f.c. between units.
Footcandle values are avaraged
and rounded off and are based
on a minimium of five units.
Surface
Luminaires
DMX Network
Accessories
Addressable Interface Kit: Cat. No. CLEDAIK
Load addresses and select operating mode for
DMX protocol, load serial numbers and specific
lighting preset, update firmware to each LED
lighting unit
DMX Terminator: Cat. No. CLEDDMXTERM
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • C0708
Lightolier is a Philips group brand
Loading...