Lightolier LED Exit Sign LD User Manual

LD Series LED Exit Sign LD

Page 1 of 1 AC Only or Emergency Operation Die-Cast Aluminum Housing

The LD Series is ideal for locations that require an attractive, reliable and economical exit sign. In addition, all electronics are contained within the exit frame
for low profile mounting.

Front View

13.25”

(33.7 cm)

Side View

2.38”

(6.0 cm)

Standard Canopy

8.13”

(20.7 cm)

4.63”

(11.8 cm)

.75”

(1.9 cm)

4.75”

(12.1 cm)

Complete Fixture consists of base exit sign. Select options and accessories below.

How to Specify:

LD

SERIES BATTERY STENCIL LETTER STENCIL FACE/
FACES COLOR HOUSING COLOR

LD = Die Cast Aluminum
LED Exit

N = Nickel Cadmium
A = AC Only

1 = Single
2 = Double

R = Red
G = Green

Features

1. Illumination: Illumination is accomplished with long lasting, high output

Light Emitting Diodes (LEDs). LEDs and support electronics have an expected
life of 25 years.

2. Housing: Constructed of die-cast aluminum with NFPA-type field selectable

chevrons. Housing and stencil face castings are available with durable epox y­based powder coat paint finishes. A brushed aluminum stencil face is also
available. Universal knockouts located on backplate allow for wall mounting
directly to standard junction boxes. A mounting canopy is provided for top/
side mount applications.

3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-

state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.

4. Battery: Maintenance free, sealed nickel cadmium batter y has an estimated

service life of 5 years, and an operating temperature range of 20°F (-7°C) to
95°F (35°C).

5. Input Power Requirements:
AC Only
Red: 4.4 W (120 VAC), PF = .83

4.1 W (277 VAC), PF = .81
Green: 4.4 W (120 VAC), PF = .83

4.1 W (277 VAC), PF = .81

Emergency Operation
Red: 4.4 W (120 VAC), PF = .83

4.1 W (277 VAC), PF = .81
Green: 4.4 W (120 VAC), PF = .83

4.1 W (277 VAC), PF = .81

Options

SD = Self-Diagnostics
BZ = DC Buzzer1 (Emergency operation only)
BF = Buzzer/Flasher1 (Emergency operation only)
DL = UL Damp Location Listing
ST = Special Input Transformer (Specif y voltage & frequency)
FA = 24 VDC Fire Alarm Interface2 (reg. constant DC voltage)
FL = Flasher1 (Emergency operation only)
2CKT1 = 120 VAC Two Circuit
2CKT2 = 277 VAC Two Circuit
DC6 = 6 VDC Remote Emergency Power
DC12 = 12 VDC Remote Emergency Power
TP = Tamperproof Screws (Requires TPTOOL)
VRS = Vandal Resistant Lens
LC = Low Level Matching Die-Cast Remote Exit
LL = Low Level Institutional Frame Surface Mt Remote Exit
LR = Low Level Recessed Die Cast Remote Exit
SW = Special Wording

NOTES: 1) LEDs will flash (and/or generate an audible signal) when device is activated and/or normal utility

has failed.

2) LEDs will flash when device is activated if normal utility is present (AC only version). LEDs will flash when
device is activated without normal utility (emergency only version).

Multiple option configurations may void UL listing. Consult factory for specifics.

Job Information Type:

Job Name:

Cat. No.:

A = Natural Brushed Aluminum Face w/ Black Housing
B = Black Stencil Face w/ Black Housing
W = White Stencil Face w/ White Housing
N = Natural Brushed Aluminum Face w/ Natural Brushed Aluminum Housing
WA = Natural Brushed Aluminum Face w/ White Housing

Code Compliance

UL 924 listed.

Accessories

CXKIT12W(B) = 12” Pendant Kit, White (Black)
WG4 = Wall Mount Exit Wire Guard
PCS1 = Polycarbonate Vandal Shield

Lightolier is a Philips group brand

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • G0308