4 ⅛"
(105 mm)
¾" (19 mm)
1 ¾"
(45 mm)
3 ¼"
(83 mm)
1 ¾"
(45 mm)
DMR01
Decorative, Round Marker LED
Page 1 of 2
4 ⅛"
(105 mm)
1 1116"
¾"
(19 mm)
(43 mm)
4 1516"
(126 mm)
3 ¼"
(83 mm)
Catalog Number Finish Lamp Wattage Color Temp Voltage
DMR01WLSA Clear, Satin Aluminum Inner Circle LED 1W 3000K 120 -240V
Job Information Type:
Job Name:
Cat. No.:
Notes:
4 ⅛"
(105 mm)
¾" (19 mm)
1 ¾"
(45 mm)
3 ¼"
(83 mm)
1 ¾"
(45 mm)
DMR01
Decorative, Round Marker LED
Page 2 of 2
4 ⅛"
(105 mm)
1 1116"
¾"
(19 mm)
(43 mm)
4 1516"
(126 mm)
3 ¼"
(83 mm)
Features
1. Heat Sink/Driver Housing: Die cast aluminum.
2. Lens: Injection molded acrylic sandblasted with clear
polished edges, developed for optimum optical output.
Decorative aluminum shield.
3. Acrylic Mounting Ring: Die cast aluminum.
4. Decorative Light Diffuser: Die cast aluminum.
5. Re-modeler Junction Box: Die cut and formed 16ga.
Galvanized steel. Can be used in new or existing construction.
Electrical
LED: (1) 1W 3000K white LED. Average expected life, under
normal operating conditions is 50,000 hours with lumen
maintenance of 70% of original light output.
Driver: Integral Class 2 power supply.
Electrical (continued)
Voltage: 120V
Output Wattage: 1 W
Input Current (max.): 65 mA
Frequency: 50/60 Hz
Output Voltage (VDC): 4 V
Constant Current: 350 mA
Finish
Satin aluminum with protective clearcoat.
Labels
cULus Listed. Suitable for Wet Locations. Type IC.
Wall mount only.
Philips Lightolier
e: lol.webmaster@philips.com
t: (508) 679-8131
w: www.lightolier.com
DMR01 February 27, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012. All rights reserved.
Job Information Type:
Loading...