Lightolier LCAWTSB User Manual
Lytespan Track Lighting LCAWTSB
2-1/8"
(55.0mm)
11-3/4"
(297.2mm)
8-3/8"
(213.5mm)
4-1/4"
(176.4mm)
4"
(100.1mm)
5-3/8"
(135.4mm)
2"
(49.5mm)
2
4
1
5
7
12
10,11
9
14,15
17
16
3
13
6
12-3/4"
(325.2mm)
3-1/2"
(87.5mm)
Page 1 of 2 ColorSpot 4-Button Low Voltage LED
Catalog No. Finish Specifications Mounting
LCAW TSBWH
LCAW TSBBK
LCAW TSBAL
Features
1. Ly tespan Attachment Fitting: Molded polycarbonate. Integral color.
Rotate into track for mechanical/electrical connection.
2. Moveable Contact: Solid brass. Extend, for connection to 2nd circuit in
Advent track.
3. Ground Contact: Solid brass
4. Polarit y Keyway
5. Push Lever: Die-casted. Engages unit to track.
6. Locking Lever: 24 gauge spring steel. For mechanical connection to track.
7. 4-Button Controller: 4 but ton interface allows preset values to be selected
by scrolling through them in order or in reverse order (2 but tons) and to vary
the intensity up and down (2 buttons). Molded polycarbonate dark grey color
with light grey pict-o-grams.
8. Synchronizer: Printed circuit board (PCB) mounted. 120V input, with a
sensitive capter and hearing captation for the 4-button controller.
9. Thermal Management System: Keeps the LED at appropriate temperature.
10. PSU Housing/Cover: Die-cast aluminum
11. Power Supply Unit: High power factor solid state unit. Thermally protected,
Class 2.
12. Pivot Mounting: Die-cast aluminum. Permanently tensioned. 300° horizontal
rotation and 180° vertical adjustment.
13. Arm Housing/Cover: Die-cast aluminum. Hides leads.
14. LED Housing: 24 gauge steel. 4 slots and a per forated back for ventilation to
15. 6-Cluster LED: 6 clusters of 4 lighting emission diodes (LED) mounted
keep diodes cooler.
in circle with the optic placed in front of light emitting region produce a
maximum optical intensity (20° of diffusion) of the LEXEL™. The Thermal
Management Systems keep the temperature as low as possible.
White
Black
Aluminum
120V - 60Hz Monopoint/Multipoint
Basic, Radius, Advent Track Ceiling
Stem Mounted Track
Extension Wands/Slope Ceiling Adapter
Recessed Track
ProSpec Track
Features (continued)
16. Mounting Belt: Die-cast aluminum. 4 slots for ventilation and mounting
of spot components.
17. Accessory Cartridge: Die-cast aluminum. Captive; retaining ring included.
To hold diffusers.
Dimming
Not compatible w/dimmers.
Finish
All painted finishes are baked powder or enamel.
Labels
cULus, Certified for dry locations only.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
No
Yes
Yes
No
Yes
No
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008
Lytespan Track Lighting LCAWTSB
Page 2 of 2 ColorSpot 4-Button Low Voltage LED
Aiming Angle:
L = Beam length D = Dist ance
W = Beam Width A = Aiming Angle
C = Distance to center b eam FC = Foo tcandles
L and W are the outer points where t he candle
power drops to 50% of the maximum. FC are the
initial footcandles at the cen ter of the beam.
Lamp data shown is ty pical. Consult lamp
manufacturers for availabilit y and performance.
CBCP = Center Beam Candle Power.
Lamp
Beam Spread
(To 50 % CBCP) CBCP
Lexel LED 20°
Rated
Life (hrs.)
5984 50,000
Features
• RGGB Array – 24 high brightness LEDs
• Can be set to match any other white sour ce (CFL, HID, etc.)
• Color s ensor/feedback system continuously
monitors color and adjusts LED channels to
maintain color/CCT with no shift over life
• Light intensity sensor adjusts voltage to LEDs to
maintain the selected light output for life.
• Self-contained, intelligence complete with power supply/
control electronics, simplifies net work design
• Inter nal mixing optics prov ide smooth even beam
of light and minimize the RGB dot effect
• No multiple shadows or color fringing
• Thermally optimized hea t sink f or consistent
output and long life (50K hrs @ 100%)
• Available in either 4-But ton control model
with presets or DMX control model.
0° 30° Horizontal 30° Vertical 45° Vertical
D FC L W D C FC L W
6' 166 2.2' 2.2'
8' 94 3.0' 3.0'
10' 60 3.7' 3.7'
12' 42 4.4' 4.4'
Catalog Number Controls Finish Wattage Voltage
LCAWTSX WH DMX (RJ45)
6' 3.5' 108 3.0' 2.6'
8' 4.6' 61 4.0' 3.4'
10' 5 .8' 39 5.0' 4.3'
12' 6.9' 27 6.0' 5.1'
Matte White
D C FC L W
2' 3.5' 187 3.3' 1.8'
3' 5.2' 83 5.0' 2.2'
4' 6.9' 47 6.6' 3.0'
5' 8.7' 30 8.3' 3.7'
LCAWTSBWH 4-But ton
LCAWTSXBK DMX (RJ45)
Matte Black
34W to 64W 120V
LCAWTSBBK 4-Button
LCAWTSX AL DMX (RJ45)
LCAWTSBAL 4-Button
Matte
Aluminum
D C FC L W
3' 3.0' 235 2.3' 1.6'
4' 4.0' 132 3.1' 2.1'
5' 5.0' 8 5 3.8' 2.6'
6' 6.0' 59 4.6' 3.1'
Lightolier is a Philips group brand
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008
Loading...