Lightolier IS-SL110A User Manual

INSTRUCTION SHEETINSTRUCTION SHEET

INSTRUCTION SHEET

INSTRUCTION SHEETINSTRUCTION SHEET

INSTRUCTION FOR INSTALLATION KUBIK LIGHT

LINEAR FLUORESCENT LUMINAIRE

IS:SL1 10A

04-05/Rev-03

A. POWER SUPPLY:

1. Follow the instructions sheet on the appropriate power
supply. (See series ISSL003)

B. COVER: (if required)

1. Carefully pull the

lamp holder housing out from the

channel. (Fig.1)

2. Insert the end of a small slot

screwdriver into the slot.

(Fig.2)

3. Lift the

cover gently all along the channel. (Fig.2)

4. Ajust ball plunger pressure as needed. (Fig.4)

To reinstall the cover

1. Align one end of the

cover with the block in the channel.

(Fig.3)

2. Press the cover along the length of channel. (Fig.3)

C. DIRECTION:

1. Follow the instructions Sheet No. ISSL003H.

D. LAMP:

(does not apply to the extended blank model no. SL003F)

2" and 2-3/4" model

1. Carefully pull the lamp holder housing out of the channel.
(Fig.1)

2. Align the pins of the lamp with the lamp holder(s), and
push in until they click. (Fig.5)

13-7/8" model

1. Align the pins of the lamp with the lamp holder, and push
in until they click. (Fig.6)

2. Gently push the stem outward and align the of the lamp
with the lamp holder, and push together until they
click. (Fig.6)

BLANK EXTENSION

LAMP

HOLDER

SCREWDRIVER

CHANNEL

COVER

SLOT

CHANNEL

FIG.1

FIG.2

Linear fluorescent lamp T5 miniature, BI-PIN base

BLOCK

LAMP

HOLDER

STEM

CHANNEL

PINS

PINS

COVER

FIG.3

LAMP

LAMP

LAMP HOLDER

BALL
LOCK

FIG.4

LAMP
HOLDER

FIG.5

FIG.6