Architectural Decorative IS-CWL280612
Direct Luminaire Mounting Track Mounting
Direct Luminaire Mounting
with Track
OK
Page 1 of 3 Instruction Sheet for Assembly and Installation
Read and understand these instructions before installing luminaire
This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and
regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
A
Luminaires must be installed by a qualified electrician in
accordance with all national and local electrical and construction
codes and regulation.
Make sure power is OFF
Mounting Options
25 @ 4 ft (1219 mm)
CLMT2548
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
Lightolier is a Philips group brand
Architectural Decorative IS-CWL280612
CLICK!
Leader Cable
Luminaire
N
L
J-Box
(by others)
Page 2 of 3 Instruction Sheet for Assembly and Installation
1 ft (30 5 mm)
CW LJC12
—
5 ft (1.5 m)
CWLJC60
Connect additional luminaires
either luminaire-to-luminaire
or via Jumper Cable
Attach Terminator
Connect the leader cable — make connections at J-Box (by others) then attach luminaire (see IS-CWLPC120).
10 ft (3.05 m)
CW LPC12 0
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
Architectural Decorative IS-CWL280612
��0º
�0º
��0º
�80º
Page 3 of 3 Instruction Sheet for Assembly and Installation
Turn the power ON
Rotate each luminaire to aim the 110° beam
Item Type Part Number
Concealed White LED Adjustable, 12 inch (305 mm), 120 VAC
Concealed White LED Adjustable, 6 inch (152 mm), 120 VAC
Mounting Track
Leader Cable, Permanent
Jumper Cable
2800 K CWL281212
4200 K CWL421212
2800 K CWL280612
4200 K CWL420612
25 @ 4 ft (1219 mm) CLMT2548
10 ft (3.05 m) CWLPC120
1 ft (305 mm) CWLJC12
5 ft (1.5 m) CWLJC60
B Do not attempt to inst all or use a luminaire until you read and understand the
installation instr uctions and safet y labels.
B Do not use a luminaire if the lens, housing, or power cables are damaged.
B Luminaire have line voltage risk of shock and no user serviceable par ts. Do
not attempt to open them.
B Do not use a luminaire for any voltage for which i t is not rated. Do not
exceed the specified voltage and current input for any luminaire.
B Ensure that main power supply is off before installing or wiring a luminaire.
This device complies with part 15 of the F CC Rules. Operation is subject to the
following t wo conditions: 1) This device may not cause harm ful inter ference. 2)
This device mus t accept any interf erence received, including interference that
may cause undesired operation.
C Do not hot swap luminaire. Ensure that power to the series is off before
connecting or disconnecting individual lu minaires.
C Caution: Led Radiation Do Not Stare In to Beam Class 2 L ed Produc t
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
Lightolier is a Philips group brand
Loading...