
Architectural Decorative IS-CCL06WF12
Terminator
Concealed
Color LED Adjustable
Jumper Cable
Leader Cable
Power Supply
Page 1 of 3 Instruction Sheet for Assembly and Installation
Read and understand these instructions before installing luminaire
This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and
regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
A
Luminaires must be installed by a qualified
electrician in accordance with all national and local
electrical and construction codes and regulation.
Make sure power is OFF
Installation Example
1 ft (30 5 mm)
CCLJC12
—
5 ft (1.5 m)
CCLJC60
CC L12W F12
—
CC L12N F12
—
CCL06WF12
—
CC L06N F12
CCLPS602P
—
CCLPS608P
30 ft (9.1 m)
CCLPC360
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008

Architectural Decorative IS-CCL06WF12
Direct Luminaire Mounting Track Mounting
Direct Luminaire Mounting
with Track
Page 2 of 3 Instruction Sheet for Assembly and Installation
Mounting Options
25 @ 4 ft (1219 mm)
CLMT2548
Attach Terminator Turn the power ON
1 ft (30 5 mm)
CCLJC12
—
5 ft (1524 mm)
CCLJC60
Connect additional luminaires
either luminaire-to-luminaire
or via Jumper Cable
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008

Architectural Decorative IS-CCL06WF12
LED RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
CAUTION
TEST STANDARD: IEC 60825- : 993+A : 997 +A2: 200
BLUE LED WAVELENGTH: 469nm
GREEN LED WAV ELENGTH: 5 9nm
RED LED WAVELENGTH: 624nm
MAXIMUM OUTPUT OF RADIATION: 2.8mW
Non-replaceable LED
Page 3 of 3 Instruction Sheet for Assembly and Installation
Address Luminaires – Refer to Power / Data Supply Manual
Item Type Part Number
Concealed Color LED Adjustable 12 inch
(305 mm)
Concealed Color LED Adjustable 6 inch
(152 mm)
Mounting Track
Leader Cable and Terminator
Jumper Cable
sPDS-60ca 60W Power / Data Supply
120° X 120° CCL12WF12
100° X 40° CCL12NF12
120° X 120° CCL06WF12
100° X 40° CCL06NF12
25 @ 4 ft (1219 mm) CLMT2548
30 ft (9.1 m) CCLPC360
1 ft (305 mm) CCLJC12
5 ft (1.5 m) CCLJC60
24V DMX / Ethernet CCLPS602P
A Verif y power is off before ins talling or de-installing.
B Do not attempt to inst all or use until you read and understand the
installation instr uctions and safet y labels.
B Luminaires have line voltage risk of shock and no user serviceable parts.
Do not attempt to open t hem.
B Do not use any voltage or curren t the product is not rated for.
B Do not use if the product housing or power cables are damaged.
C Do not hot swap luminaires . Ensure that power to the series is off before
connecting or disconnecting individual lu minaires.
C Do not modify or alter the product . Doing so will void the warranty.
C Ensure that the device is securely a ttached, properly mounted, and free of
excessive v ibra tion.
C This device complies with part 15 of the F CC Rules. Operation is subject
to the following two conditions: 1) This device may not cause harmful
interference. 2) This device mus t accept any interf erence received,
including inter ference that may cause undesired operation.
C Use only with CCLPS6 02P or CCLP S608P Clas s 2 power supply unit
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008