Lightolier IS-7472 User Manual

/

INSTRUCTION SHEET NO

INSTALLATION OF LOUVER ACCESSORY FOR MR-16 FIXTURES

IS:7472

0487

NOTE: This accessory is intended for specific Lightolier MR-16 fixtures only see catalog for complete

listing.

~e~ @4

1.Disconnect power and allow lamp to cool before
installing LOUVER accessory.

2. Remove lamp assembly, referencing the specific
fixture instructions for Iamping and relamping.

3. Remove the LAMP and GLASS LAMP GUARD.

4. Place the LOUVER into the lamp assembly (Figs.l,2,3).
Note: when used with ribbed type lamp assemblies,
place the louver so that it seats in the assembly,
flush with the RIBS (Figs. 4,5,6).

5. Replace the GLASS LAMP GUARD and LAMP

~u

FIG. 1

(FIXT. 6286,6287)

GLASS LAMP GUARD

FIG. 2

(FIXT. 6298,6299)

LAMP

WARNING

LAMP MANUFACTURERS REQUIRE A
GLASS LAMP GUARD BE IN PLACE
BEFORE ENERGIZING LAMP AND THAT
GREAT CARE SHOULD BE TAKENTHAT
LAMP IS FULLY COOLED BEFORE
RELAMPING.

6. Replace lamp assembly as instructed on individual
fixture instruction sheet.

‘“SS”MPG”AR

LOUVER

RIB

FIG. 6

LOUVER

FIG. 3

FIG. 4

(FIXT. 6296,6297)

RIB

*NOTE: l%r fixtures 6420, 6421, it is

loosen two springs to insert louver.

[ml<>[-[~<>[-[[~l? MONTRE&UEB EC, CANADi

necessay to

5

FIG.

(FIXT. 6420,6421)

B SE CAUCUS NEW JERSEY, 07094.050