Lightolier IS-40620 User Manual
flEADANDUNDEINTANDTHESEINSTRUCTIONSBEFOREINSTALLINGFfXTURE
fkture is intended for installation in accordwwa with tie National Elmtrical codeendl~l raguletions.
h
Iassure full compliance with Ikcal codes and regulations, chsck with your lad elecEiwl inspector before
stallation. To prevent electrical shock, turn off elactricitf at fuse box befora procaading.
Main Uresoinatruationsformaintaoaocarafaraoca.
INSTRUCTIONS FOR INSTAUATION OF A.D.A. LUNA
COVERSFIXTURES 40S20,4DGZDN1.4W20H2
INSTRUCTIONSHE~ NO.
IS:40620
R0194
PaOa1 of 2
NOTE
compactfluoraacantvaraion, thaiocandaacantvaraionaaaamblessndinatallathaaamo.
3ACKP3ATE INSTALLATION:
( Using the appropriate slots in MOUNTING PLATE,secura MOUNTING PIATE to OUTLET BOX using 011TL!3 BOX SCREWS (provided with
1. While supporting BACKPL4TE make contractions black fixture lead or fixtura without tracer marks to Rot(black) supply lead white fisture lead or
L Position BACKPL4TE over MOUNTING PIATE allowing MOUNTING SCREWS to come through tha holq in BACKPLATE.
j. SecureBACKPIATEinpositionbyinstallingthe‘@.voBATTERYNUTSoverMOUNTINGSCREWSandtighten.
i. Installrecommendedlamp.
ForCom act Fluoraacant Unite.
WARN~NG-(RISK OF FIRE) MOST DWELLINGS BUILT BEF~RE1BB5HAVESUPPLYWIRE RATEDSW C.CONSULTA
QUALIFIEDELECTRICIANBEFOREINSTALLATION.
This instructionsheetcoversbothcompsctfluorescentandincandescenttypefirrturas.Altheughillustrationshews
Thread MOUNTING SCREWS into back of MOUNTING PLATEso MOUNTING SCREW HEAOStighten into recessed araa of MOUNTING PLATE(Fig. 1).
OUTLET BOX).
fisture lead with trecar marks to neutral (white) supply lead. Uninsulated fixtwa wire is a ground wira add must be connested to grounding terminal
or ground lead inside OUTLETBOX. Use WIRE NUTS (local hardwara item). Push supply wires and wirEmut connections back into OUTLET BOX.
CAUTION Make certain wires are net pinchad batwaao parta.
NOTE If supplywirasare locatedwithinthraeinchesofballaaf,uaewire ratadforatIeaetW C.
CAUTION
MAXIMUM WAllAGE AS MARKED ON FIXTUREMUST NOT BE EXCEEDEO.
THUMBSCREW
a
.
.
v’-’-’-
k
.
0
m
9A
BATTERYNUT
/
WTNUCTION SHE~ NO.
INSTRUCTIONS FOR INSTALLATION OFA.DJl LUNA (Continued)
1S:40620
Iolw
)IFFUSER lNSTALLhON
Position DIFFUSERso that recessed area of DIFFUSERLIPhooks war DIFFUSERCAT12Hon BACKPLATE (Fig. 2).
Swing DIFFUSERback againat SACKPlATE and sacure DIFFUSERin position by threading THUMB SCREW, into hole in the top
of BACKPIATE (Fig. 3).
Page2 Ofz
COVERSFIXTURES 4fM20,40B20N1,4W20H2
CAUTION: Make certain that THUMB SCREWtightens into tha raceasad sres ofthe DIFFUSERLIP (Fig.3).Do not over
tightanTHUMBSGREW.DIFFUSEifdamagacouldoccur.
THUMBSCREW
/’--
1
c rTHuMBscRw
4
I
HG.9
Loading...