Lightolier HX User Manual

HX Series LED Exit Sign HX

Page 1 of 1 AC Only, Emergency Operation, or Combo Class I, Div. 2 Exit

The HX Series LED Exit combines energy-saving LED technology with a durable enclosure suitable for hazardous locations. The HX Series is UL listed for use in
Class I, Division 2 and Class II, Division 2 Areas.

Complete Fixture consists of base exit sign. Select options and accessories below.

How to Specify:
AC Only & Emergency Operation

HX 1

SERIES BATTERY STENCIL LETTER
FACES COLOR

HX = Hazardous Location
LED Exit (AC & Emergency
Operation)

N = Nickel Cadmium

A = AC Only

1 = Single

R = Red LED
G = Green LED

Two Head Combo

HX 6 1

SERIES VOLTAGE BATTERY/ STENCIL LETTER # OF LAMP
WATTAGE FACES COLOR

LED Exit (Combination
Emergency Exit)

NOTES

1) Selected lamp wattage cannot exceed unit output rating. 2) Suggested heads are listed above. For additional Lamp Heads, see RT66 Specification Sheet

6 = 6 VDCHX = Hazardous Location

L12 = Lead Calcium, 12W
L24 = Lead Calcium, 24W
L60 = Lead Calcium, 60W

1 = SingleL6 = Lead Calcium, 6W

R = Red LED
G = Green LED

HEADS HEADS

2 = Two

1 = One

Blank = No Heads

HH6 = 6W Halogen

HT8 = 8W Tungsten
HT25 = 25W Tungsten

1,2

Features

1. Illumination: Illumination of the exit stencil face is accomplished with long

lasting, high output, direct view LEDs.

2. Housing: Constructed of impact resistant, fiberglass reinforced polyester.
Housing color is gray with stainless steel hardware and clear polycarbonate
cover. Includes one-piece formed gasket and corrosion resistant hardware.

3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid­state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.

4. Battery: Choice of maintenance free, sealed nickel cadmium battery with
12-year life and operating temperature range of 20°F (-7°C) to 95°F (35°C), or
maintenance free, sealed lead calcium bat tery with 5-year life and operating
temperature range of 65°F (19°C) to 85°F (30°C) - two head combo only.

5. Input Power Requirements:

AC Exit Only - .08A (120 VAC), .03A (277 VAC)

EM Exit Combo - .09A (120 VAC), .04A (277 VAC)
Combo - .21A (120 VAC), .09A (277 VAC)

6. Warranty: Electronics: 3 years; Nickel Cadmium Battery: 5 year full, 5 years
pro-rata; Lead Calcium Battery: 1 year full, 4 years pro-rata.

Code Compliance

UL 924 listed.

Options

SD = Self-Diagnostics
SA = Self-Diagnostics with Alarm
SDTD = Self-Diagnostics with Time Delay
ST = Special Input Transformer (Specify voltage & frequency)
T1 = 120 VAC Time Delay
T2 = 277 VAC Time Delay
S = Shatterproof Lamp Head Lens

Accessories

MG1WP = Single Gasketed Mounting Plate, Gray
MG2WP = Double Gasketed Mounting Plate, Gray
WG4 = Wire Guard

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • E0308

Lightolier is a Philips group brand