Lightolier HE User Manual

HE Series

CLASS I DIVISION 2 EMERGENCY LIGHTING

Page 1 of 2

HE125L2HH8SD2

13.2"

(33.5 cm)

21.4"

(54.4 cm)

7.1"

(18.0 cm)

15.2 "

(38.6 cm)

Features

Illumination: Illumination

is accomplished with lamp

heads mounted on the top of

the unit. The Class I, Div. 2

rated “H” Series lamp head

is available in a variety of

wattages, and is constructed of

gray polycarbonate to match

the housing.

Housing: Constructed of

impact-resistant, fiberglass-

reinforced polyester. Housing

color is gray and includes

stainless steel hardware. The

HE Series is UL listed for

Class I, Division 2, Groups

A, B, C & D; Class I, Zone

2, Groups IIA , IIB (+ H

IIC; and Class II, Division 2,

Groups F & G. View-through

window allows easy monitoring

of the optional voltmeter and

ammeter. Available with Class

I, Div. 2 rated polycarbonate

sealed beam Par 36 tungsten or

halogen lamp heads.

Operating Temperature

Range: Standard location

65°F (19°C) to 85°F (30°C)

) &

2

Electrical Specifications:

Lead Calcium

6 VDC 25 & 50 W:

0.18 A (120), 0.08 A (277)

12 VDC 25, 50, 100 & 125 W:

0.40 A (120), 0.18 A (277)

NiCad

6 & 12 VDC 25 W:

0.088 A (120), 0.042 A (277)

6 VDC 50 & 75 W, 12 VDC

50 W:

0.19 A (120), 0.084 A (277)

12 VDC 75 & 100 W:

0.29 A (120), 0.14 A (277)

12 VDC 125 & 150 W:

0.39 A (120), 0.18 A (277)

Diagnostic Electronics

(standard): 120/277 VAC

dual voltage input with surge

protection is standard on all

models. Charging system is

microprocessor driven with

software embedded diagnostic

routine and precision

temperature compensation.

Surge protection, brownout,

AC lockout, and low voltage

disconnect features are

standard.

Job Information Type:

Job Name:

Cat. No.:

Self-Testing Diagnostics

(optional): The diagnostic/

charging platform with self-

testing mode automatically

runs a one-minute self-test

every 30 days and a 30-minute

test on the sixth and twelfth

month. A one-minute or

90-minute test may be initiated

via the push to test switch on

the unit or by activating the

appropriate test command on

the optional IR test device.

Code Compliance

UL 924 and 844 listed. NFPA

101, NEC, BOCA, OSHA and

IBC illumination standards.

Temperature Rating (T-Rating)

160° (T3C). Class I, Zone 2

T-Rating 200° (T3).

Warrant y

Three year full electronics

warranty. One year full plus

four year prorated lead calcium

battery warranty. Five year full

plus five year prorated nickel

cadmium battery warranty.

Notes:

Ordering Information

Series

HE1 = 6 VDC
Class I Div. 2
Emergency Lighting
Unit
HE2 = 12 VDC
Class I Div. 2
Emergency Lighting
Unit

Battery/DC Voltage

6 V Lead Calcium

25L = 25 Watt Unit
50L = 50 Watt Unit

6 V Nickel Calcium

25N = 25 Watt Unit
50N = 50 Watt Unit
75N = 75 Watt Unit

12 V Lead Calcium

25L = 25 Watt Unit
50L = 50 Watt Unit
100L = 100 Watt Unit
125L = 125 Watt Unit

12 V Nickel Calcium

25N = 25 Watt Unit
50N = 50 Watt Unit
75N = 75 Watt Unit
100N = 100 Watt Unit
125N = 125 Watt Unit
150N = 150 Watt Unit

HE Series

CLASS I DIVISION 2 EMERGENCY LIGHTING

Page 2 of 2

SD2

# of Heads

Blank = No Lamp Heads
1 = One Lamp Head
2 = Two Lamp Heads
3 = Three Lamp He ads

Lamp Heads

6 V Tungsten

HT8 = 8 Watts
HT12 = 12 Watts
HT18 = 18 Watts
HT25 = 25 Watts

6 V Halogen

HH8 = 8 Watts
HH12 = 12 Watts

12 V Tungsten

HT12 = 12 Watts
HT18 = 18 Watts
HT25 = 25 Watts

12 V Halogen

HH8 = 8 Watts
HH12 = 12 Watts

Model Designator

SD2 = Diagnostic
Electronics

1

Factory Installed Options

A = Ammeter
EX = Special Input Transformer (specify

voltage & frequency)

T = Self-Testing Diagnostics
TA = Audible Self-Testing Diagnostics
TD = Time Delay (15 minutes)
V = Voltmeter

Accessories (order as a separate item)
SDREMOTE = Infrared Remote Test

Device
WG = Wire Guard

Note

1) Some option combinations may impact
UL listing. Consult factory for specifications.

1

Optics

Wall Mounted 7.5' AFF, 12 V 12 W Halogen Lamp Heads Represented

1 FC Average

7.5 ft.

.2

.8

.3

.2

1.3

.4

Average initial footcandles at floor = 1.12

Maximum initial footcandles at floor = 4.9

Minimum initial footcandles at floor = 0.2

Maximum to minimum ratio = 24.50

* The optics layout shown is intended to be used as reference only. Standard reflectances used were 80/50/20. Lightolier is not responsible for site specific conditions that
may alter the results.

2.7

2.2

3.1

.6

2.1

.5

Philips Lightolier
e: [e-mail]
t: [phone]
w: www.lightolier.com

HE Series August 4, 2011

Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.

.9

1.0

.8

.5

.8

.5

2.3

1.9

.5

2.7

3.3

.5

1.3

.2

30 ft.

.6

.8

.2

.2

.3

.3

.2

.8

2.8

1.3

.4

3.1

.6

2.2
.9

2.0

.5

.8

.5

.9

2.4

.7

.5

1.9

.5

2.6
.7

3.2

.6

1.3

.4

.2

.2

.2

9 ft.

Job Information Type: