Lightolier GV4WB432 User Manual
GUARDSMAN GV4WB432
Page 1 of 2 VANDAL RESISTANT WRAPAROUND, 15-5/16" WIDE, 4' LENGTH
SURFACE FLUORESCENT 4 LAMP, T8 OR T12
DIMENSIONS
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 6A/Folio P20-62
Features
• Excellent for locations where vandal
resistance is required.
• Prismatic lens is 50% DR (impact
resistant), and 50% standard acrylic with a nominal thickness of
1/8", withstands 70 ft. lbs. impact without breaking.
• Tamper resistant holt head screws secure lens to housing.
• UL-Listed for direct mounting on low density ceilings and
damp locations.
• Steel end caps, standard.
• Self-aligning for continuous row mounting.
• Heavy duty, die formed channel of code gauge steel.
48" (1219 mm)
11/16" Dia.
K.O. (2)
7/8" Dia.
K.O. (3)
4' FIXTURE
1/4" x 1/2"
K.O. (2)
2-1/4" (57mm)
3-1/4" (83mm)
4-1/4" (108mm)
2-7/8"
(73mm)
15-5/16" (389mm)
GUARDSMAN GV4WB432
Page 2 of 2 VANDAL RESISTANT WRAPAROUND, 15-5/16" WIDE, 4' LENGTH
SURFACE FLUORESCENT 4 LAMP, T8 OR T12
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 6A/Folio P20-62
Job Information Type:
OPTIONS & ACCESSORIES
SCREWDRIVER: For holt head screw. Order Catalog Number LP156737.
ELECTRICAL/WIRING OPTIONS Consult factory
FUSING: Internal fast-blow fusing.
SUFFIX: GLR.
Internal slow-blow fusing.
SUFFIX: GMF.
SPECIFICATIONS
PERFORMANCE: In an installation of 4 lamp 32W luminaires in a room cavity
ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be
less than .81. To reduce glare the VCP shall be not less than 37 either crosswise or lengthwise (at 100fc level) and the average brightness at 65° shall not
exceed 3465 candelas per square meter. To control veiling reflections, luminaire
output in the 30°-90° zone shall not be less than 72.3%.
MATERIALS: Chassis parts are die formed code gauge cold rolled steel.
FINISH: Multi-stage phosphate treated for maximum corrosion resistance and
finish coat high reflectance baked white enamel.
SPECIFICATIONS (continued)
LENS: Prismatic lens is 50% DR (impact resistant) and 50% standard acrylic
with a nominal thickness of 1/8", withstands 70 ft. lbs. impact without breaking.
SCREWS: Tamper resistant holt head screws secure lens to housing.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB.
If K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W./UL and C-UL.
MODEL NO. GV4WB432120O4
ORDERING INFORMATION
Explanation of Catalog Number. Example: GV4WB432120O4GLR
Other dimming options. Consult factory.
LER = FW - 76 IW - 108 BF - 0.91
Comparative yearly lighting energy cost per 1000 lumens = $3.16
GV
VANDAL
RESISTANT
SURFACE
LUMINAIRE
FIXTURE
LENGTH:
4=4 Foot
8=8 Foot
WB
FIXTURE
TYPE:
WB=Wraparound
15-5/16" wide
4
LAMP
QUANTITY
LAMP TYPE/
FIXTURE LENGTH:
32=T8
34=T12
(nominal 48"
or 96")
VOLTAGE:
120 or 277
BALLAST TYPE:
2-2 Lamp Mag. T12 LE
20THD 10THD
2-2 Lamp Elec. T8 SO* HI*
1-4 Lamp Elec. T8 O4* H4*
*Instant Start Standard
OPTIONS:
Add appropriate
suffix to catalog
no, ie: (GLR)
coefficient of utilization
pfc 20
pcc 80 70 50
pw 70 50 30 70 50 30 50 30
RCR
0929292 898989 8383
1838177 817875 7371
27770667568646561
37063566860565753
46556486355475246
55950425748424640
65545395344384136
75140345040343933
84738304636303429
94534284234283227
10 41 32 26 40 30 25 29 25
typical V.C.P.’s
Room Mounting Height
Size Lengthwise Crosswise
8.5 10 8.5 10
30x30 51 54 47 52
40x40 49 51 42 46
60x30 53 56 51 55
60x60
46 48 37 41
100x100 45 45 33 36
candlepower
angle end 45 cross
0 3116 3116 3116
5 3123 3119 3107
15 3020 3063 3099
25 2814 2941 3020
35 2506 2716 2830
45 2040 2285 2285
55 1178 1348 1257
65 632 695 862
75 348 395 553
85 95 229 372
95 0 156 306
105 3 163 237
115 6 119 162
125 10 87 117
135 15 65 91
145 13 48 65
155 13 31 46
165 11 17 25
175 11 11 14
Loading...