GUARDSMAN GV4WA232
Page 1 of 2 Vandal Resistant Wraparound, 10-5/16" WIDE, 4' OR 8' LENGTH
SURFACE FLUORESCENT 2 LAMP, T8 OR T12
DIMENSIONS
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 6A/Folio P20-60
Features
• Excellent for locations where vandal resistance is required.
• Prismatic lens is 50% DR (impact
resistant), and 50% standard acrylic with a nominal thickness of
1/8", withstands 70 ft. lbs. impact without breaking.
• Tamper resistant holt head screws secure lens to housing.
• UL-Listed for direct mounting on low density ceilings and
damp locations.
• Steel end caps, standard.
• Self-aligning for continuous row mounting.
• Heavy duty, die formed channel of code gauge steel.
48" (1219 mm)
11/16" Dia. K.O. (2)
7/8" Dia. K.O. (3)
4' FIXTURE
1/4" x 1/2" K.O. (2)
2-1/4" (57mm)
3-1/4" (83mm)
4-1/4" (108mm)
96" (2438 mm)
13/16" (21mm)
24" (610mm) 24" (610mm)
8' FIXTURE
1/4" x 1/2"
K.O. (2)
7/8" Dia. K.O. (4)
11/16" Dia. K.O. (4)
2-1/4" (57mm)
3-1/4" (83mm)
4-1/4" (108mm)
2-7/8"
(73mm)
10-5/16" (262mm)
C
L
C
L
11/16" (17mm)
GUARDSMAN GV4WA232
Page 2 of 2 Vandal Resistant Wraparound, 10-5/16" WIDE, 4' OR 8' LENGTH
SURFACE FLUORESCENT 2 LAMP, T8 OR T12
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 6A/Folio P20-60
Job Information Type:
OPTIONS & ACCESSORIES
SCREWDRIVER: For holt head screw. Order Catalog Number LP156737.
ELECTRICAL/WIRING OPTIONS Consult factory
FUSING: Internal fast-blow fusing.
SUFFIX: GLR.
Internal slow-blow fusing.
SUFFIX: GMF.
SPECIFICATIONS
PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity
ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be
less than .79. To reduce glare the VCP shall be not less than 45 either crosswise or lengthwise (at 100fc level) and the average brightness at 65° shall not
exceed 2273 candelas per square meter. To control veiling reflections, luminaire
output in the 30°-90° zone shall not be less than 73.4%.
MATERIALS: Chassis parts are die formed code gauge cold rolled steel.
FINISH: Multi-stage phosphate treated for maximum corrosion resistance and
finish coat high reflectance baked white enamel.
SPECIFICATIONS (continued)
LENS: Prismatic lens is 50% DR (impact resistant) and 50% standard acrylic
with a nominal thickness of 1/8", withstands 70 ft. lbs. impact without breaking.
SCREWS: Tamper resistant holt head screws secure lens to housing.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB.
If K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W./UL and C-UL.
MODEL NO. GV4WA232120SO
ORDERING INFORMATION
Explanation of Catalog Number. Example: GV4WA232120SOGLR
Other dimming options. Consult factory.
LER = FW - 70 IW - 59 BF - 0.92
Comparative yearly lighting energy cost per 1000 lumens = $3.43
GV
GUARDSMAN
VANDAL
RESISTANT
FIXTURE
LENGTH:
4=4 Foot
8=8 Foot
WA
FIXTURE
TYPE:
WA=Wraparound
10-5/16" wide
2
LAMP
QUANTITY
LAMP TYPE/
FIXTURE LENGTH:
32=T8
34=T12
(nominal 48"
or 96")
VOLTAGE:
120 or 277
BALLAST TYPE:
2 Lamp Mag. T12 LE
20THD 10THD
2 Lamp Elec. T8 SO* H
I*
*Instant Start Standard
OPTIONS:
Add appropriate
suffix to catalog
no, ie: (GLR)
coefficient of utilization
pfc 20
pcc 80 70 50
pw 70 50 30 70 50 30 50 30
RCR
0919191 888888 8181
1827976 807773 7169
27669657268636459
36861566759545652
46455476153465145
55848425647514540
65444385242364035
75040344839333832
84636294535293428
94434284133273226
10 40 30 25 40 29 25 28 23
typical V.C.P.’s
Room Mounting Height
Size Lengthwise Crosswise
8.5 10 8.5 10
30x30 61 64 57 62
40x40 58 61 51 56
60x30 62 66 60 65
60x60 55 57 45 50
100x100
53 54 40 43
candlepower
angle end 45 cross
0 1482 1482 1482
5 1482 1482 1479
15 1432 1463 1483
25 1331 1409 1458
35 1186 1313 1375
45 967 1078 1045
55 541 615 568
65 305 329 388
75 162 208 292
85 45 129 251
95 0 111 261
105 1 147 199
115 3 83 107
125 44862
135 64457
145 73447
155 72132
165 5915
175 567