Lightolier DVA5G32MS240 User Manual
VP PARABOLIC DVA5G32MS240
Page 1 of 2 20”x 60” RECESSED FLUORESCENT 32 CELL PARABOLIC LOUVER
STATIC AND AIR SUPPLY/ RETURN IES RP24 PREFERRED
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 2/Folio G09-15
Features
• Meets IES RP-24 Preferred Practice.
• Ideal for intensive VDT use areas.
• Only 4” deep.
• Utilizes CFI Advance Technology Reflector Louver.
• Faceplate made with die-formed 20 gauge steel with edges
hemmed for rigidity.
• Full length air slots with bent edge for rigidity.
• Precise fitting reflector louver.
• Louver securely held with CFI concealed torsiontite spring clips.
• Fixture Efficiency 62.0%.
*Contact factory for availability of louver finishes.
VP PARABOLIC DVA5G32MS240
Page 2 of 2 20”x 60” RECESSED FLUORESCENT 32 CELL PARABOLIC LOUVER
STATIC AND AIR SUPPLY/ RETURN IES RP24 PREFERRED
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 2/Folio G09-15
Job Information Type:
SPECIFICATIONS
PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity
ratio of 1 reflectance 80% ceiling, 50% wall, 20% floor the C.U. shall not be
less than 0.69. To prevent glare the VCP shall not be less than 88 either lengthwise or crosswise (at 100 fc level) and that the average luminance will conform
with the IES RP-24 preferred standard, and have a fixture efficiency of not less
than 60%.
MATERIALS: Chassis parts are die-formed 22 gauge cold rolled steel. Faceplate
is die-formed 20 gauge cold rolled steel with edges hemmed for rigidity.
LOUVER: Post-anodized aluminum.
FINISH: Louver - Low iridescence specular post-anodized vertical grain sheet or
Low iridescence reflector matte post-anodized vertical grain sheet. Chassis exterior -white baked polyester powder coat.
SPECIFICATIONS
(continued)
ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certi-
fied by ETL if K.O. is within 3” of ballast use wire suitable for at least 90°.
LABELS: Listed by CSA/UL.
ORDERING INFORMATION Explanation of Catalog Number. Example: DVA4G32MS240120OC
DV
ADVANCE TECH-
NOLOGY:
Reflector Louver in
a 20 x 60 Faceplate
BODY STYLE:
A=Air Handling/
Static
5
FIXTURE
WIDTH
5 = 20”
G
CEILING TYPE:
G-Grid
(Lay in T-Bar)
32
NUMBER OF
CELLS:
LOUVER
FINISH:
MS=Low Iridescence
Reflector Matte
PS=Low Iridescence
GFI Anodized
Specular
2
LAMP QUANTITY
40
LAMP
LENGTH:
40 = 48”
VOLTAGE:
120
277
347
OPTIONS:
Add appropriate
suffix to catalog
no, ie: (HRD)
BALLAST TYPE:
OC = T8
SO = Electronic T8
DI = Dimming
Loading...