Lightolier DR2C User Manual

Lytespan

®

Track Lighting System DR2C

Page 1 of 1 Director® Sequencing Laser Remote Control

2 3/16”

(55)

(145)

5 11/16”

Ordering Information

Catalog No. Finishes Luminaire Compatibility

DR2C Silver Compatible with all Lytespan, ProSpec and Monopoint Director Remote Controlled luminaires.

Description

Hand-held controller equipped with a laser and infrared transmitters that is
used to aim and change light levels of Director luminaires from a remote
location. The visible laser selects the unit and allows it to receive movement
and dimming commands by infrared. The laser signal accuracy allows a single
unit to be easily selected, however any number of Director luminaires can be
controlled by a single controller. The controller allows the user to remotely aim
the unit, set the light level and set up timed sequences of moves.

Electrical

Uses (3) AAA batteries (provided).

Features

1. LCD Display

2. Tilt Up

3. Select: Activates laser.

4. Tilt Down

5. Step: Allows stepping through a sequence one position at a time.

6. Edit: For editing a position.

7. Go: Starts a sequence

8. Record: For recording a sequence.

9. Global Command Buttons: Allows recording and recalling of a sequence

for a group of Directors without the need to select them first with the laser.

10. Pan Right

11. Pan Left

12. Dim Up (low voltage Directors only)

13. Dim Down (low voltage Directors only)

14. Cancel

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B1107