Lightolier CAM25OVA User Manual

7 1/4"

(184.15)

6 3/8"

(161.93)

4 11/16"
(119.06)

2 1/16"
(52.39)

1 9/16"
(39.69)

1 7/16"
(36.51)

9/16"

(14.51)

REQUIRES LASER

REMOTE CONTROL

FOR OPERATION

5

4

10

2

3

6

11

9

7

8

1

( ) Denotes Dimensions in MM

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • D0705

Job Information Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Description

Individually addressable module that mounts anywhere along the track and

accepts any Lytespan Line & Low Voltage Incandescent luminaire (see luminaire
compatibility for exceptions) for the purpose of addressing a selected single
luminaire for raising and lowering the light level (dimming) or switching On/Off,
while powered by the same track. Programmable to store desired light levels of
single luminaires or to group with two or more luminaires within the same
system for the purpose of creating light scenes and effects (including kinetic
lighting effects)

Features

1. Module Housing: High-temperature impact resistant thermoplastic.

2. PCB: High temperature resistant programmable electronics with smart mod-

ule microprocessor.

3. Basic Lytespan Track Strip: Die cast aluminum, with high-temperature

impact resistant thermoplastic insulator, supporting electrical contacts.
Accepts Lytespan luminaires for individual control.

4. Track Attachment Fitting: High-temperature impact resistant poly-carbon-

ate, rotates into track; integral polarity keyguard.

5. Moveable Brass Contact: Extends for 2nd circuit in two circuit Lytespan

track systems.

6. Attachment Lever: Impact resistant polycarbonate. For mechanical/electri-

cal connection to track.

7. Locking Lever: Steel, safety locking lever locks and supports module in

track.

8. IR & Laser Sensors: Sensor devices for receiving information from ATOM

Remote Control.

9. Sensor Cover: Clear Polycarbonate, protects sensors from damage.

10. LED: Red indicator light, provides visual response to operation modes.

11. Top Cover Heat Sink: Die cast aluminum, for structural support and heat

dissipation.

Electrical

Unit is polarized and continuously grounded throughout. 250W load capacity.

Options & Accessories

ATOM Track Master Module (CAMTM): Used on track to cycle Module

scenes & to send out signals to multiple modules from a single location on
the track.

ATOM Wall Remote Control (CAMWRC): Used to activate programmed
scenes from wall location.

Lightolier Controls COMPOSETMPLC In-Line Filter (CPLCILF20):

Recommended for each track circuit with an ATOM installation. Reduces
unwanted electrical noise on track circuit.

Lightolier Controls COMPOSE Firewall, 4 & 8 circuit (CPLCFW4,
CPLCFW8): Used when multiple circuits are to be controlled.

Lightolier Controls COMPOSE Master Control Station (CP5ESPLC):

Ellipse Series 5, Scene Master

The ATOM System is compatible with all Lightolier Controls COMPOSE
PLC system.

Lytespan

®

Track Lighting System CAM25OVA

Page 1 of 2

Ordering Information

Catalog No. Finishes Track Mounting Luminaire Compatibility

CAM250VAWH Matte White Compatible with Lytespan Basic Should be "Compatible with
CAM250VABK Matte Black Radius, & Advent Track Systems. any Lytespan Line & Low Voltage

DO NOT USE with Extension Wands, Incandescent luminaire,
Sloped Ceiling Adapter, All Monopoints, 250W Max. DO NOT USE with Power Jack,
& Prospec Track Metal Halide, Fluorescent, or Convenience Outlet Units

Addressable Track Dimming Module

Addressable Track Non-Dim On/Off Module

Will dim or switch power ON or OFF to a luminaire via remote control.
Module will function with incandescent line voltage and low voltage
luminaires, 250W MAX. Module attaches anywhere along track. Accepts
commands from Laser Remote Control and Wall Remote Control units. Can
be combined with Track Master Module to create several different lighting
effects.

See separate specification sheet for additional details before specifying this unit.

CAM250VAWH (Matte White)
CAM250VABK (Matte Black)

Track Master Module

Sends control signals along the track to other modules from any location on
the track. Used to create cycle scenes, lighting effects, and dim, raise, or
turn on or off the light levels on all modules on the track simultaneously.
Use one track master per track branch circuit. Accepts commands from
Laser Remote Control and Wall Remote Control units.

See separate specification sheet for additional details before specifying this unit.

CAMTMWH (Matte White)
CAMTMBK (Matte Black)

Laser Remote Control

Used to program the system and change light levels from a remote location.
Equipped with a laser and infrared (IR) transmitters. The visible laser signal,
when pointed at a module, places the module in program mode.
The laser signal accuracy allows a single unit to be selected easily when
multiple modules are on the track & the IR signal programs the desired
functions. The remote will allow the user to set the light level, turn modules
on or off, set and run multiple lighting scenes, set fade rates, set cycle
times, and begin and end cycles. The remote operates the Dimming
Module, Non-Dim On/Off Module, and Track Master Module.

See separate specification sheet for additional details before specifying this unit.

CAMLRC

Wall Master Control

Used to control Addressable Track Dimming & Non-Dim On/Off Modules in
the track in order to activate programs in the system from a wall location.
The wall remote will allow the user to run multiple programmed lighting
scenes and to begin and end cycles. A Track Master Module must be used
with the Wall Remote Control, in order to control the modules in the system
to run the effects.

See separate specification sheet for additional details before specifying this unit.

CAMWRCWH (Matte White)
CAMWRCI (IVORY)

ATOM PROGRAMS

SCENES:

Lighting effects and light levels can be stored in each module for use at any
time.
Each group of stored settings is called a scene. Each module can store 6
scenes.

FADE - Effects:

The time transition between scenes can be programmed into each module.
The units are pre-programmed with a 3 second fade rate from the factory.

CYCLE - Effects:

This Function requires a Track Master Module. The modules will cycle
through their scenes in a continuous loop. You can cycle through scenes,
cycle on, or cycle off. Up to 6 Cycle effects can be programmed.

For a detailed explanation of operation, please see the ATOM Operations
Manual.

ATOM Addressable Track Module System

7 1/4"

1 9/16"

2 1/16"

4 11/16"

1 9/16"

7 1/4"

1 9/16"

4 11/16"

1 9/16"

2 1/16"

5/8"

3 1/43"

1 1/4"

(31.75)

4 1/2"

(114.3)

2 3/4"

(69.85)

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • D0705

Job Information Type:

Lytespan

®

Track Lighting System CAM25OVA

Page 2 of 2

Addressable Track Dimming Module