Calculite
®
HID Adjustable Accent C7P38MHA
Page 1 of 3 7" Aperture, PAR38 Ceramic Metal Halide
Features
1. Reflector Trim: Low brightness,anodized aluminum with integral flange in
painted white or polished to match inside of cone.
2. Lamp Holder Assembly: Unitized optics insure alignment of lamp and aper-
ture cone. Integral C-shaped media holder accepts up to two 4 3/4" media.
3. Trim Adjustment Mechanism: Provides 45° vertical tilt, 360°+ horizontal
rotation; lockable. EZ-Aim Helical Drive System provides fast and accurate hot
aiming with Philips screwdriver.
4. Socket: Medium base porcelain socket with nickel plated screwshell,
pulse rated.
5. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.
6. Frame Vertical Adjustment Mechanism: Accommodates mounting to vir-
tually any ceiling system using pre-installed mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
10. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.
Electrical (cont.)
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/M143 120/277 0.67/0.28 78
100W MH M90/M140 120/277 0.90/0.43 110
150MWH M102 120/277 1.40/0.61 167
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20° F minimum
starting temperature, Type 1 Outdoor rating.
Ballast ANSI Code Voltage Max. Amps Input Watts
70W MH M98/M143 120/277 1.90/0.80 94
100W MH M90/M140 120/277 2.40/1.10 125
150W MH M102 120/277 3.70/1.60 180
Options and Accessories
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V).
Chicago Plenum: Consult Factory.
Labels: UL (Suitable For Damp Locations), CSA (magnetic ballast only), I.B.E.W.
For 150W, install fixtures with minimum spacing: 2 feet from center-to-center
of adjacent luminaries; 1/2 inch from top of luminaire to overhead building member;
1 foot from luminaire center to side building member.
6
11 9
8
7
5
4
3 2
5
/8" (16 mm)
Vertical Adjustment:
3
/4" (25 mm) to
2 7/8" (73 mm)
1
1 7/8"
(302 mm)
8-3/8" (213 mm) Dia.
7" (178 mm) Dia.
1
1/8" (29 mm) max.
C
eiling Thickness
15" (381mm)
10-5/8"
(270 mm)
20" (508 mm) to
30" (762 mm)
Top View
(Electronic Ballast)
20-1/4" (514 mm)
19-1/8" (486 mm)
Ceiling Cutout: 8” (203mm) Dia.
Reflector Trim Frame-In Kit Lamp (Ceramic MH)
C7P38MHA CLW Specular Clear, White Painted Flange.
CLP Specular Clear, Matching Flange.
CCDW Comfort Clear Diffuse, White Painted Flange.
CCDP Comfort Clear Diffuse, Matching Flange.
CCZW Champagne Bronze, White Painted Flange.
CCZP Champagne Bronze, Matching Flange.
C7A70P38E1 Electronic 120V / C7A70P38E2 Electronic 277V 70W PAR38
C7A10P38E1 Electronic 120V / C7A10P38E2 Electronic 277V 100W PAR38
C7A15P38E1 Electronic 120V / C7A15P38E2 Electronic 277V 150W PAR38
Magnetic 120V/277V 70W PAR38
Magnetic 120V/277V 100W PAR38
Magnetic 120V/277V 150W PAR38
2
1
Top View
(Magnetic Ballast)
20" (508 mm) to
30" (762 mm)
10-5/8"
(270 mm)
15" (381mm)
19-5/8" (498 mm)
22-1/8" (562 mm)
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711
Calculite
®
HID Adjustable Accent C7P38MHA
Page 2 of 3 7" Aperture, PAR38 Ceramic Metal Halide
(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam.
25,000
12,500
37,500
5
0,000
35,500
17,500
52,500
70,000
10,000
20,000
30,000
40,000
30°
6
0°
30°
60°
30°
60°
30° Aiming Angle
Horizontal Surface
DC FC LW
8' 4.6' 421 3.4' 2.9'
10' 5.8' 269 4.3' 3.7'
12' 6.9' 187 5.1' 4.4'
15' 8.7' 120 6.4' 5.5'
20' 11.5' 67 8.5' 7.3'
30° Aiming Angle
Vertical Surface
DC FC LW
3' 5.2' 576 4.1' 1.9'
4' 6.9' 324 5.5' 2.5'
6' 10.4' 144 8.2' 3.8'
8' 13.9' 81 11.0' 5.1'
12' 20.8' 36 16.4' 7.6'
CANDLEPOWER DISTRIBUTION
3
0° Aiming Angle
V
ertical Surface
DC FC LW
2
' 3.5' 1610 1.7' 0.8'
3' 5.2' 716 2.6' 1.3'
4
' 6.9' 402 3.5' 1.7'
6
' 10.4' 179 5.2' 2.5'
8' 13.9' 101 7.0' 3.4'
A
NGLE WALL
7
0W PAR38 CERAMIC MH - SPOT
0 591
5 494
1
0 777
15 1754
2
0 6720
25 25893
30 51516
3
5 36239
40 10746
45 2213
50 541
55 24
6
0 0
6
5 0
70 0
75 0
80 0
85 0
90 0
30° Aiming Angle
Horizontal Surface
DC FC LW
8' 4.6' 740 2.3' 1.9'
10' 5.8' 473 2.8' 2.4'
12' 6.9' 329 3.4' 2.9'
15' 8.7' 210 4.2' 3.6'
20' 11.5' 118 5.6' 4.9'
30° Aiming Angle
Vertical Surface
DC FC LW
3' 5.2' 1012 2.6' 1.3'
4' 6.9' 570 3.5' 1.7'
6' 10.4' 253 5.2' 2.5'
8' 13.9' 142 7.0' 3.4'
12' 20.8' 63 10.4' 5.0'
ANGLE WALL
100W PAR38 CERAMIC MH - SPOT
0 754
5 617
10 1017
15 2401
20 9437
25 36599
30 72897
35 51255
40 15140
45 3051
50 684
55 0
60 0
65 0
70 0
75 0
80 0
85 0
90 0
ANGLE WALL 150W PAR38 CERAMIC - SPOT
0 2034
5 2897
10 4305
15 9181
20 19173
25 33229
30 41456
35 32864
40 17863
45 8682
50 3530
55 544
60 62
65 18
70 0
75 0
80 0
85 0
90 0
AIMED 30º. TOWARD WALL
LAMP: 150W PAR38 SP CERAMIC MH,
SYLVANIA
LUMEN RATING: 9100 LMS.
CBCP: 41456
BEAM ANGLE: 18
AROMAT ELECTRONIC BALLAST
DATE: APR 7, 2004
CERTIFIED TEST REPORT NO. 2583FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**
AIMED 30º. TOWARD WALL
LAMP: 100W PAR38 CERAMIC MH,
PHILIPS
LUMEN RATING: 6800 LMS.
CBCP: 72897
BEAM ANGLE: 12
AROMAT ELECTRONIC BALLAST
DATE: FEB 26, 2004
CERTIFIED TEST REPORT NO. 2488FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**
AIMED 30º. TOWARD WALL
LAMP: 70W PAR38 SP CERAMIC MH,
P
HILIPS
LUMEN RATING: 4800 LMS.
CBCP: 51516
B
EAM ANGLE: 12
A
ROMAT ELECTRONIC BALLAST
DATE: FEB 26, 2004
CERTIFIED TEST REPORT NO. 2485FR
C
OMPUTED BY LSI PROGRAM
*
*TEST-LITE**
30° Aiming Angle
Horizontal Surface
DC FC LW
6' 3.5' 929 1.7' 1.5'
8' 4.6' 523 2.3' 1.9'
10' 5.8' 335 2.8' 2.4'
12' 6.9' 232 3.4' 2.9'
15' 8.7' 149 4.2' 3.6'
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711
Job Information Type:
Loading...