Lightolier Calculite C6T6A-MHT6RS Specification

Calculite

®

HID Adjustable Accent C6T6A-MHT6RS

Page 1 of 2 6" Aperture, T6 Ceramic Metal Halide, Spot

7" (176 mm) Dia.

5 3/4" (146 mm) Dia.

20" to 30"

10-5/8"

15"

19-5/8"

22-1/8" (Magnetic)

20-1/4" (Electronic)

19-1/8"

T

op View

Features

1. Spot Upper Reflector: Specular faceted aluminum; provides 12° beam.

Interchangeable with 25° Narrow Flood (MHT6RNF) and 40° Flood (MHT6RF);
see spec sheets C6T6A-MHT6RNF and C6T6A-MHT6RF.

2. Trim Kit: Low brightness aperture cone; anodized aluminum, self-flanged in

painted white or aperture-matching polished flange. Consult factory for other
finishes.

3. Lamp Shield: High-temperature glass as required by code; captive

during re-lamping.

4. Trim Kit Adjustment Mechanism: Provides 40° vertical tilt, 360° horizon-

tal rotation; lockable. EZ-Aim™ Helical Drive System provides fast and accu­rate hot aiming with Philips screwdriver.

5. Socket Housing: Galvanized steel, pre-wired with G12 pulse rated socket.

Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical performance.

6. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover

for top re-lamping.

7. Frame Vertical Adjustment Mechanism: Accommodates mounting to

virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.

8. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping

bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.

9. Retention Springs: Rust resistant springs secure trim for quick, tool-less

installation.

10. Ballast / Cover Assembly: Accessible from below and removable without

tools for inspection and ballast replacement .

11. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

90°C through branch circuit conductors. Allows inspection from below.

12. Accessory Holder: Sold separately catalog # CAH6; die-formed steel,

matte black finish, slide-in installation. Accepts up to two 4 3/4" dia. media.

13. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electrical

Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D

<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18 on­consumer equipment, shut-down circuit at end of lamp life, sound rating “A”,

-5°F (-20°F for 150W) minimum starting temperature, Type 1 outdoor rating.

Ballast ANSI Code Voltage Max. Amps Input Watts

39W MH M130 120/277 0.39/0.17 44
70W MH M139 120/277 0.67/0.28 78
150W MH M142 120/277 1.40/0.60 167

Options and Accessories

Chicago Plenum: Consult Factory

Labels

UL (Suitable for Damp Locations), CSA, I.B.E.W.
For 150W, install fixtures with minimum spacing between:

1. Center-to center of adjacent luminaries: 2 feet.

2. Top of luminaire to overhead building member: 1/2 inch.

3. Luminaire center to side building member: 1 foot.

Ceiling Cutout: 6 9/16” (167mm) Dia.

For Complete Fixture Order: Trim Kit + Spot Upper Reflector (MHT6RS) + Frame-In Kit. Each Sold Separately.

Trim Kit + Spot Upper Reflector Frame-In Kit Lamp

C6T6A + MHT6RS (Spot Upper Reflector)

CLW Specular Clear, White Painted Flange
CLP Specular Clear, Matching Flange

CCDW Comfort Clear Diffuse, White Painted Flange
CCDP Comfort Clear Diffuse, Matching Flange
CCZW Champagne Bronze, White Painted Flange
CCZP Champagne Bronze, Matching Flange

C6A39T6E1 Electronic 120V 39W T6 Ceramic MH
C6A39T6E2 Electronic 277V 39W T6 Ceramic MH
C6A70T6E1 Electronic 120V 70W T6 Ceramic MH
C6A70T6E2 Electronic 277V 70W T6 Ceramic MH
C6A15T6E1 Electronic 120V 150W T6 Ceramic MH
C6A15T6E2 Electronic 277V 150W T6 Ceramic MH

Spot Upper
Reflector

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406

Calculite

®

HID Adjustable Accent C6T6A-MHT6RS

Page 1 of 2 6" Aperture, T6 Ceramic Metal Halide, Spot







(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam.

15,000

7,500

22,500

30,000

20,000

10,000

30,000

40,000

15,000

30,000

45,000

60,000

3

0°

6

0°

30°

60°

30°

60°

30° Aiming Angle

Horizontal Surface

DC FC LW

8' 4.6' 588 2.8' 2.4'
10' 5.8' 377 3.5' 3.0'
12' 6.9' 261 4.2' 3.6'
15' 8.7' 167 5.3' 4.6'
20' 11.5' 94 7.1' 6.1'

30° Aiming Angle

Vertical Surface

DC FC LW

3' 5.2' 805 3.3' 1.6'
4' 6.9' 453 4.4' 2.1'
6' 10.4' 201 6.7' 3.2'
8' 13.9' 113 8.9' 4.2'
12' 20.8' 50 13.3' 6.3'

C

ANDLEPOWER DISTRIBUTION

30° Aiming Angle

Vertical Surface

DC FC LW

2' 3.5' 881 1.6' 0.8'
3

' 5.2' 391 2.4' 1.2'

4

' 6.9' 220 3.2' 1.5'

6

' 10.4' 98 4.8' 2.3'

8' 13.9' 55 6.3' 3.1'

ANGLE WALL

39W T6 - SPOT REFLECTOR

0 818
5

750
10 690
15 1259
2

0 4462
25 15824
3

0 28178
35 15763
4

0 2815
4

5 449
5

0 113
55 25
6

0 7
6

5 7
7

0 0
75 0
80 0
85 0
90 0

30° Aiming Angle

Horizontal Surface

DC FC LW

8' 4.6' 370 2.6' 2.3'
10' 5.8' 237 3.3' 2.8'
12' 6.9' 165 3.9' 3.4'
15' 8.7' 105 4.9' 4.3'
20' 11.5' 59 6.6' 5.7'

30° Aiming Angle

Vertical Surface

DC FC LW

3' 5.2' 507 3.1' 1.5'
4' 6.9' 285 4.1' 2.0'
6' 10.4' 127 6.2' 2.9'
8' 13.9' 71 8.2' 3.9'
12' 20.8' 32 12.3' 5.9'

ANGLE WALL

70W T6 - SPOT REFLECTOR

0 1572
5 1428
10 1372
15 2778
20 8866
25 24261
30 36503
35 25125
40 7106
45 1406
50 299
55 22
60 0
65 0
70 0
75 0
80 0
85 0
90 0

ANGLE WALL 150W T6 - SPOT REFLECTOR
0 3075
5 3190
10 4131
15 7281
20 17435
25 39398
30 57972
35 41597
40 14245
45 3556
50 1060
55 198
60 20
65 20
70 0
75 0
80 0
85 0
90 0

AIMED 30 deg. TOWARD WALL

LAMP: 150W T6 MH, PHILIPS
LUMEN RATING: 14000 LMS.

CBCP: 57972
Beam Angle: 15
AROMAT 150W ELECTRONIC BALLAST

DATE: APR 18, 2004
CERTIFIED TEST REPORT NO. 2604FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

AIMED 30 deg. TOWARD WALL

LAMP: 70W T6 MH, PHILIPS
LUMEN RATING: 6600 LMS.

CBCP: 36503
Beam Angle: 14
AROMAT 70W ELECTRONIC BALLAST

DATE: APR 16, 2004
CERTIFIED TEST REPORT NO. 2602FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

AIMED 30 deg. TOWARD WALL

LAMP: 39W T6 MH, PHILIPS
L

UMEN RATING: 3400 LMS.

CBCP: 28178
B

eam Angle: 11

A

ROMAT 39W ELECTRONIC BALLAST

DATE: APR 17, 2004
CERTIFIED TEST REPORT NO. 2603FR

C

OMPUTED BY LSI PROGRAM

**TEST-LITE**

3

0° Aiming Angle

H

orizontal Surface

D

C FC LW

6

' 3.5' 508 1.5' 1.3'

8

' 4.6' 286 2.1' 1.8'

1

0' 5.8' 183 2.6' 2.2'

1

2' 6.9' 127 3.1' 2.7'

15' 8.7' 81 3.9' 3.3''

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0406

Job Information Type: