Lightolier Calculite C6P30MHA Specification

Calculite

®

HID Adjustable Accent C6P30MHA

Page 1 of 2 6" Aperture, PAR30 Ceramic Metal Halide

Features

1. Reflector Trim: Low brightness, specular anodized aluminum or with

integral flange in painted white or polished to match inside of cone.

2. Lamp Holder Assembly: Unitized optics insure alignment of lamp

and aperture cone. Integral C-shaped media holder accepts up to two
4 3/4"dia. medias.

3. Trim Adjustment Mechanism: Provides 40° vertical tilt, 360°+ horizontal

rotation; lockable. EZ-Aim Helical Drive System provides fast and accurate
hot aiming with Philips screwdriver.

4. Socket: Medium base porcelain pulse rated socket with nickel plated

screwshell.

5. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.

6. Frame Vertical Adjustment Mechanism: Accommodates mounting to

virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.

7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping

bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.

8. Retention Springs: Rust resistant springs secure trim for quick, tool-less

installation.

9. Ballast / Cover Assembly: Accessible from below and removable without

tools for inspection and ballast replacement .

10. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

90°C through branch circuit conductors. Allows inspection from below.

11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electrical

Electronic Ballast: 120V or 277V, 50/60 Hz.. encased, high power factor, T.H.D.

<15%, thermally and transient protected, RMI/RFI complies with
FCC part 18 non-consumer limits, shut-down circuit at end of lamp life, sound
rating "A", -5° F minimum starting temperature, Type 1 Outdoor rating.

Electrical (Cont.)

Ballast ANSI Code Voltage Max. Amps Input Watts

39W MH M130 120/277 0.39/0.17 44
70W MH M98/M143 120/277 0.67/0.28 78

Magnetic Ballast: 120V/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating "B", -20°F minimum starting
temperature, Type 1 Outdoor rating.

Ballast ANSI Code Voltage Max. Amps Input Watts

39W MH M130 120/277 1.00/0.40 56
70W MH M98/M143 120/277 1.90/0.80 94

Options and Accessories

Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V)
Chicago Plenum: Consult Factory.

Labels:

UL (Suitable For Damp Locations), CSA (magnetic ballast only), I.B.E.W.

6

110 98

7

543 2

5/8" (16 mm)

Vertical Adjustment: 

3/4" (25 mm) to 

2

7/8" (73 mm)

10 7/8" 

(276 mm)

7-7/8" (181 mm) Dia.

5-3/4" (146 mm) Dia.

1 1/8" (29 mm) max.
Ceiling Thickness

 









15" (381mm)

10-5/8" 

(

270 mm)

20" (508 mm) to
30" (762 mm)



Top View

(Electronic)

Top View

(Magnetic)

20" (508 mm) to
30" (762 mm)

10-5/8" 

(

270 mm)

15" (381mm)



2

0-1/4" (514 mm)

19-1/8" (486 mm)



19-5/8" (498 mm)

22-1/8" (562 mm)

Ceiling Cutout: 6 9/16” (167 mm) Dia.

Reflector Trim Frame-In Kit Lamp

C6P30MHA CLW Specular Clear, White Painted Flange. C6A39P30E1 Electronic 120V 39W PAR30 Ceramic MH

CLP Specular Clear, Matching Flange. C6A39P30E2 Electronic 277V 39W PAR30 Ceramic MH
CCDW Comfort Clear Diffuse, White Painted Flange. C6A70P38E1 Electronic 120V 70W PAR30 Ceramic MH
CCDP Comfort Clear Diffuse, Matching Flange. C6A70P38E2 Electronic 277V 70W PAR30 Ceramic MH
CCZP Champagne Bronze, White Painted Flange. Magnetic 120V/277V 39W PAR30 Ceramic MH
CCZW Champagne Bronze, Matching Flange. Magnetic 120V/277V 70W PAR30 Ceramic MH

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711

Calculite

®

HID Adjustable Accent C6P30MHA

Page 2 of 2 6" Aperture, PAR30 Ceramic Metal Halide

5,000

10,000

15,000

2

0,000

30°

12,500

25,000

3

7,500

50,000

30°

60°

2,000

4,000

6,000

8,000

30° Aiming Angle

Vertical Surface

DC FC LW

2' 3.5' 670 1.6' 0.8'
3

' 5.2' 298 2.4' 1.2'

4

' 6.9' 167 3.2' 1.5'

6

' 10.4' 74 4.8' 2.3'

8' 13.9' 42 6.3' 3.1'

ANGLE WALL

39W PAR30 CERAMIC MH - SPOT

0

393

5

487

1

0 674
15 1349
20 3847
25 11394
3

0 21431
3

5 11215
40 3294
45 951
50 240
5

5 41
6

0 8
65 0
70 0
75 0
8

0 0
85 0
90 0

AIMED 30 deg. TOWARD WALL

LAMP: 39W PAR30 SP CERAMIC MH,
P

HILIPS LUMEN RATING: 2200 LMS.

C

BCP: 21431
Beam Angle: 11
AROMAT 39W ELECTRONIC BALLAST

D

ATE: MAR 1, 2004
CERTIFIED TEST REPORT NO. 2500FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

3

0° Aiming Angle

H

orizontal Surface

D

C FC LW

6' 3.5' 387 1.5' 1.3'
8' 4.6' 217 2.1' 1.8'
10' 5.8' 139 2.6' 2.2'
12' 6.9' 97 3.1' 2.7'
15' 8.7' 62 3.9' 3.3'







(

FC) is initial footcandles at center of

b

eam. Beam length (L) and beam width

(

W) are to where the candlepower is

r

educed to 50% of the center beam

c

andlepower. (C) is the distance to the

c

enter of the beam.

60°

3

0° Aiming Angle

Vertical Surface

DC FC LW

3' 5.2' 722 2.4' 1.2'
4' 6.9' 406 3.2' 1.5'
6' 10.4' 180 4.8' 2.3'
8' 13.9' 101 6.3' 3.1'
12' 20.8' 45 9.5' 4.6'

ANGLE WALL

70W PAR30 CERAMIC MH - SPOT

0

934
5 1162
10 1615
15 3251
20 9309
25 27611
30 51951
35 27177
40 7969
45 2285
50 561
55 79
60 0
65 0
70 0
75 0
80 0
85 0
90 0

AIMED 30 deg. TOWARD WALL

LAMP: 70W PAR30 SP CERAMIC MH
P

HILLIPS

L

UMEN RATING: 4850 LMS.

CBCP: 51951
Beam Angle: 11
A

ROMAT 70W ELECTRONIC BALLAST

DATE: MAR 1, 2004
CERTIFIED TEST REPORT NO. 2497FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

3

0° Aiming Angle

Horizontal Surface

DC FC LW

8' 4.6' 527 2.1' 1.8'
10' 5.8' 337 2.6' 2.2'
12' 6.9' 234 3.1' 2.7'
15' 8.7' 150 3.9' 3.3'
20' 11.5' 84 5.2' 4.4'

1,750

875

2,625

3,500

30°

60°

30° Aiming Angle

Vertical Surface

DC FC LW

3' 5.2' 49 10.8' 3.8'
4' 6.9' 28 14.4' 5.0'
6' 10.4' 12 21.6' 7.6'
8' 13.9' 7 28.8' 10.1'
12' 20.8' 3 43.1' 15.1'

ANGLE WALL

39W PAR30 CERAMIC MH - FLOOD

0 703
5 765
10 1226
15 2133
20 3040
25 3429
30 3539
35 3485
40 3065
45 2370
50 1477
55 579
60 82
65 11
70 0
75 0
80 0
85 0
90 0

AIMED 30 deg. TOWARD WALL

LAMP: 39W PAR30 FL CERAMIC MH,
PHILIPS
LUMEN RATING: 2200 LMS.

CBCP: 3539
Beam Angle: 35
AROMAT 39W ELECTRONIC BALLAST

DATE: MAR 1, 2004
CERTIFIED TEST REPORT NO. 2499FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

30° Aiming Angle

Horizontal Surface

DC FC LW

8' 4.6' 36 7.0' 5.8'
10' 5.8' 23 8.7' 7.3'
12' 6.9' 16 10.4' 8.7'
15' 8.7' 10 13.0' 10.9'
20' 11.5' 6 17.4' 14.6'

30°

60°

30° Aiming Angle

Vertical Surface

DC FC LW

3' 5.2' 108 10.8' 3.8'
4' 6.9' 61 14.4' 5.0'
6' 10.4' 27 21.6' 7.6'
8' 13.9' 15 28.8' 10.1'
12' 20.8' 7 43.1' 15.1'

ANGLE WALL

70W PAR30 CERAMIC MH - FLOOD

0 1545
5 1681
10 2698
15 4696
20 6697
25 7553
30 7797
35 7677
40 6751
45 5219
50 3250
55 1272
60 176
65 18
70 0
75 0
80 0
85 0
90 0

AIMED 30 deg. TOWARD WALL

LAMP: 70W PAR30 FL CERAMIC MH,
PHILIPS
LUMEN RATING: 4850 LMS.

CBCP: 7797
Beam Angle: 35
AROMAT 70W ELECTRONIC BALLAST

DATE: MAR 1, 2004
CERTIFIED TEST REPORT NO. 2498FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

30° Aiming Angle

Horizontal Surface

DC FC LW

8' 4.6' 79 7.0' 5.8'
10' 5.8' 51 8.7' 7.3'
12' 6.9' 35 10.4' 8.7'
15' 8.7' 23 13.0' 10.9'
20' 11.5' 13 17.4' 14.6'

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711

Job Information Type: