Calculite
Spec. Sheet
C3MRW
11 26147385109
®
Evolution Lensed Adjustable Accent C3MRW
Page 1 of 2 3" Aperture, MR16 (12V)
Non-IC Frame:
12 5/8"
(321mm)
5" (127mm)
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal Frame:
C3ALV
C3ALVE1
C3ALVE2
IC AirSeal Frame:
C3AICLV
C3AICLVE1
Ceiling Cutout: 3 1/2” (130mm) Dia.
11 3/16"
(284mm)
14 3/8"
(365mm)
(365mm)
10 1/8"
(257mm)
22 3/8"
(568mm)
14 3/8"
9 5/8"
(245mm)
5" (127mm)
14 5/8"
(372mm)
9" (229mm)
5 1/2"
(140mm)
5"
(127mm)
Plus Ceiling
Thk.
1/2"
(13mm)
Flangeless Trim with
Plaster Ring Accessory
3 3/8" (86mm) Dia.
2 7/8" (73mm) Dia.
4" (102mm) Dia.
C3LV
9 1/2"
(242mm)
9"
(229mm)
1/2" (13mm)
C3AICLV
Vertical Adjustment
2" (59mm) Max.
Ceiling Thk.
1" (25mm) to
2 3/4" (70mm)
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit Frame-In Kit Lamp*
Cone Finish
Clear C3MRW CLW C3MRW CLP C3MRWCLFT
Comfort Clear Diffuse C3MRW CCDW C3MRW CCDP C3MRW CCDFT
Champagne Bronze C3MRW CCZW C3MRW CCZP C3MRW CCZFT
Gold C3MRW GDW C3MRW GDP C3MRW GDFT
Matte White C3MRW WHW N/A C3MRW WHFT
Specular Black C3MRW BKW C3MRW BKP C3MRW BKFT
White Flange Polished Flange Flangeless
C3LV Non-IC Magnetic 120/277V 42W-65W MR16 (12V)
C3LVE1 Non-IC Electronic 120V 20W-65W MR16 (12V)
C3LVE2 Non-IC Electronic 277V 20W-65W MR16 (12V)
C3ALV Non-IC AirSeal® Magnetic 120/277V 42W-65W MR16 (12V)
C3ALVE1 Non-IC AirSeal® Electronic 120V 20W-65W MR16 (12V)
C3ALVE2 Non-IC AirSeal® Electronic 277V 20W-65W MR16 (12V)
C3AICLV IC AirSeal® Magnetic 120V 20W-50W MR16 (12V)
C3AICLVE1 IC AirSeal® Electronic 120V 20W-50W MR16 (12V)
Note: Magnetic not recommended for residential or noise sensitive areas.
Features
1. Trim Kit Aperture Cone: Low brightness; 0.040" aluminum, anodized; keyed
to lamp support assembly for true aiming of lamp to prevent incorrect installation of cone. Hinged, and snaps on for easy tool-less installation. Capitive
clear glass shield during relaming. Self-flange in painted white or aperture
matching polished flange. Flangeless trim used with Plaster Trim Ring accessory. Interchangeable with other 3" Evolution trims.
2. Trim Kit Vertical Adjustment Mechanism: Die-cast aluminum. Built-in
aperture shield blocks view into fixture. Provides 0° - 45° vertical tilt up to
1" thick ceiling, less in thicker ceilings; lockable. 30° maximum tilt in ceilings
1.25" - 2" thick. EZ-Aim Helical Drive System provides fast and accurate hot
aiming with Philips screwdriver.
3. Horizontal Adjustment Mechanism: Die-form steel ring, matte black fin-
ish. Provides 362° horizontal stop, lockable with Philips screwdriver.
4. Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" diameter
accessories.
5. Cover Glass: High temperature, soft focus lens.
6. Thick Ceiling Ready Brackets: Die-form steel, matte black finish. Adjust
trim kit vertically to accommodate up to 2" thick ceiling, lockable.
7. Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon leads.
8. Frame Vertical Adjustment Mechanism (C3LV): Accommodates mounting
to virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking features secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below inside fixture.
9. Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed telescoping
bars extend from 20" to 30" long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplified installation in 24" O.C. grid systems. Attaches to steel
or wood joists without accessories.
10.Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-volt-
age, core & coil. Note: Magnetic not recommended for residential or noise
sensitive areas. Electronic: 120V or 277V 50/60 Hz., regulated lamp voltage,
HPF, EMI and circuit protections, thermal auto-reset, quiet operation.
Features (cont.)
11. Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal - Insulation must be kept 3" away from any parts
of the luminaire and must not be placed above luminaire in a manner which
will entrap heat. IC AirSeal - Luminaire may be in direct contact with thermal
insulation.
Labels
U.L. (Suitable For Wet Locations), I.B.E.W.
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W for
ceiling thickness greater than 1” (up to 2”).
Options and Accessories
2” dia. Color Filters/Specialty filters: See ADF2/AF2 specification sheets
2” Dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim): CA3FMR
Chicago Plenum: Consult Factory
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • G0711
Calculite
Spec. Sheet
C3MRW
®
Evolution Lensed Adjustable Accent C3MRW
Page 2 of 2 3" Aperture, MR16 (12V)
(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam. Footcandles are
based on photometry with luminaire,
with lamp aimed at 30° from vertical.
CANDLEPOWER DISTRIBUTION 50W MR16 - 15° Spot
AIMED 30° TOWARD WALL
REFLECTOR TRIM: C3MRWCLW
GE HALOGEN LAMP
120V ELECTRINIC TRANSFORMER
LUMEN RATING = 750 LMS
CBCP= 3348 cd
BEAM ANGLE = 15°
CERTIFIED TEST REPORT NO. 2784FR
DATE: Oct 31, 2004
**TEST-LITE**
30° Aiming Angle
Horizontal Surface
D C FC L W
6' 3.5' 61 2.1' 1.8'
8' 4.6' 34 2.8' 2.4'
10' 5.8' 22 3.5' 3.0'
12' 6.9' 15 4.2' 3.6'
15' 8.7' 10 5.3' 4.6'
30° Aiming Angle
Vertical Surface
D C FC L W
2' 3.5' 135 2.2' 1.1'
3' 5.2' 61 3.3' 1.6'
4' 6.9' 34 4.4' 2.1'
6' 10.4' 15 6.7' 3.2'
8' 13.9' 9 8.9' 4.2'
375
750
1125
1500
60°
30°
ANGLE WALL
0 243
5 376
10 415
15 568
20 1144
25 2456
30 3348
35 2561
40 968
45 239
50 59
55 18
60 2
65 0
70 0
75 0
80 0
85 0
90 0
CANDLEPOWER DISTRIBUTION 50W MR16 - 25° Narrow Flood
ANGLE WALL
0 281
5 420
60°
30°
60°
30°
10 546
15 801
20 1063
25 1298
30 1464
35 1368
40 1012
45 657
50 384
55 168
60 47
65 0
70 0
75 0
80 0
85 0
90 0
ANGLE WALL
0 246
5 319
10 420
15 727
20 1079
25 1250
30 1276
35 1221
40 1120
45 932
50 643
55 305
60 89
65 13
70 0
75 0
80 0
85 0
90 0
875
1750
2625
3500
CANDLEPOWER DISTRIBUTION 50W MR16 - 40° Flood
375
650
1025
1300
AIMED 30° TOWARD WALL
REFLECTOR TRIM: C3MRWCLW
GE HALOGEN LAMP
120V ELECTRINIC TRANSFORMER
LUMEN RATING = 800 LMS
CBCP= 1464 cd
BEAM ANGLE = 30°
CERTIFIED TEST REPORT NO. 2785FR
DATE: Oct 31, 2004
**TEST-LITE**
AIMED 30° TOWARD WALL
REFLECTOR TRIM: C3MRWCLW
GE HALOGEN LAMP
120V ELECTRINIC TRANSFORMER
LUMEN RATING = 800 LMS
CBCP= 1276 cd
BEAM ANGLE = 36°
CERTIFIED TEST REPORT NO. 2786FR
DATE: Oct 31, 2004
**TEST-LITE**
30° Aiming Angle
Horizontal Surface
D C FC L W
6' 3.5' 27 4.4' 3.7'
8' 4.6' 15 5.9' 5.0'
10' 5.8' 10 7.3' 6.2'
12' 6.9' 7 8.8' 7.4'
15' 8.7' 4 11.0' 9.3'
30° Aiming Angle
Horizontal Surface
D C FC L W
6' 3.5' 26 5.4' 4.5'
8' 4.6' 15 7.2' 6.0'
10' 5.8' 9 9.0' 7.5'
12' 6.9' 7 10.8' 9.0'
15' 8.7' 4 13.5' 11.3'
30° Aiming Angle
Vertical Surface
D C FC L W
2' 3.5' 75 5.5' 2.1'
3' 5.2' 33 8.2' 3.2'
4' 6.9' 19 10.9' 4.3'
6' 10.4' 8 6.4' 6.4'
8' 13.9' 5 21.9' 8.6'
30° Aiming Angle
Vertical Surface
D C FC L W
2' 3.5' 85 7.6' 2.6'
3' 5.2' 39 11.4' 3.9'
4' 6.9' 22 15.2' 5.2'
6' 10.4' 10 22.8' 7.8'
8' 13.9' 6 30.4' 10.4'
Job Information Type:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • G0711
Loading...