Lightolier C7P38MHA User Manual

Calculite

6

11 98

7

543 2

5/8" (16 mm)

Vertical Adjustment:

3/4" (25 mm) to

2 7/8" (73 mm)

11 7/8"

(302 mm)

8-3/8" (213 mm) Dia.

7" (178 mm) Dia.

1 1/8" (29 mm) max.
Ceiling Thickness

C7P38

15" (381mm)

10-5/8"

(270 mm)

20" (508 mm) to
30" (762 mm)

Top View

(Electronic Ballast)

20-1/4" (514 mm)

19-1/8" (486 mm)

Top View

(Magnetic Ballast)

20" (508 mm) to
30" (762 mm)

10-5/8"

(270 mm)

15" (381mm)

19-5/8" (498 mm)

22-1/8" (562 mm)

®

HID Adjustable Accent C7P38MHA

Page 1 of 3 7" Aperture, PAR38 Ceramic Metal Halide

Ceiling Cutout: 8” (203mm) Dia.

Reflector Trim Frame-In Kit Lamp (Ceramic MH)

C7P38MHA CLW Specular Clear,White Painted Flange.

CLP Specular Clear,Matching Flange.
CCDW Comfort Clear Diffuse, White Painted Flange.
CCDP Comfort Clear Diffuse, Matching Flange.
CCZW Champagne Bronze, White Painted Flange.
CCZP Champagne Bronze, Matching Flange.

C7A70P38E1 Electronic 120V / C7A70P38E2 Electronic 277V 70W PAR38
C7A10P38E1 Electronic 120V / C7A10P38E2 Electronic 277V 100W PAR38
C7A15P38E1 Electronic 120V / C7A15P38E2 Electronic 277V 150W PAR38
C7A70P38U Magnetic 120V/277V 70W PAR38
C7A10P38U Magnetic 120V/277V 100W PAR38
C7A15P38U Magnetic 120V/277V 150W PAR38

Features

1. Reflector Trim:Low brightness,anodized aluminum with integral flange in

2. Lamp Holder Assembly: Unitized optics insure alignment of lamp and aper-

3. Trim Adjustment Mechanism: Provides 45°vertical tilt, 360°+ horizontal

4. Socket: Medium base porcelain socket with nickel plated screwshell,

5. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.

6. Frame Vertical Adjustment Mechanism: Accommodates mounting to vir-

7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping

8. Retention Springs: Rust resistant springs secure trim for quick, tool-less

9. Ballast / Cover Assembly: Accessible from below and removable without

10.Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,

11.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

Electrical

Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.

<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",

-5° F minimum starting temperature, Type 1 Outdoor rating.

painted white or polished to match inside of cone.

ture cone. Integral C-shaped media holder accepts up to two 4 3/4" media.

rotation; lockable. Patented EZ-Aim Helical Drive System provides fast and
accurate hot aiming with Philips screwdriver.

pulse rated.

tually any ceiling system using pre-installed mounting bars, or 1/2" EMT tub­ing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.

bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.

installation.

tools for inspection and ballast replacement .

90°C through branch circuit conductors. Allows inspection from below.

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electrical (cont.)

Ballast ANSI Code Voltage Max. Amps Input Watts

70W MH M98/M143 120/277 0.67/0.28 78
100W MH M90/M140 120/277 0.90/0.43 110
150MWH M102 120/277 1.40/0.61 167

Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum
starting temperature, Type 1 Outdoor rating.

Ballast ANSI Code Voltage Max. Amps Input Watts

70W MH M98/M143 120/277 1.90/0.80 94
100W MH M90/M140 120/277 2.40/1.10 125
150W MH M102 120/277 3.70/1.60 180

Options and Accessories

Fuse (magnetic ballast): Add suffix F1or F2 to Frame-In Kit (F1=120V, F2=277V).
Chicago Plenum: Consult Factory.

Labels: UL (Suitable For Damp Locations), CSA (magnetic ballast only), I.B.E.W.

For 150W, install fixtures with minimum spacing: 2 feet from center-to-center
of adjacent luminaries; 1/2 inch from top of luminaire to overhead building member;
1 foot from luminaire center to side building member.

Job Information Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte Thomas Company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504

Calculite

®

HID Adjustable Accent C7P38MHA

Page 2 of 3 7" Aperture, PAR38 Ceramic Metal Halide

(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam.

CANDLEPOWER DISTRIBUTION



12,500

25,000

37,500

50,000

17,500

35,500

52,500

70,000

ANGLE WALL
0 591
5 494
10 777
15 1754

60°

30°

60°

30°

20 6720
25 25893
30 51516
35 36239
40 10746
45 2213
50 541
55 24
60 0
65 0
70 0
75 0
80 0
85 0
90 0

ANGLE WALL
0 754
5 617
10 1017
15 2401
20 9437
25 36599
30 72897
35 51255
40 15140
45 3051
50 684
55 0
60 0
65 0
70 0
75 0
80 0
85 0
90 0

70W PAR38 CERAMIC MH - SPOT

AIMED 30º. TOWARD WALL
LAMP: 70W PAR38 SP CERAMIC MH,

PHILIPS
LUMEN RATING: 4800 LMS.

CBCP: 51516
BEAM ANGLE: 12
AROMAT ELECTRONIC BALLAST

DATE: FEB 26, 2004
CERTIFIED TEST REPORT NO. 2485FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

DC FCL W

6' 3.5' 929 1.7' 1.5'
8' 4.6' 523 2.3' 1.9'
10' 5.8' 335 2.8' 2.4'
12' 6.9' 232 3.4' 2.9'
15' 8.7' 149 4.2' 3.6'

100W PAR38 CERAMIC MH - SPOT

AIMED 30º. TOWARD WALL
LAMP: 100W PAR38 CERAMIC MH,

PHILIPS
LUMEN RATING: 6800 LMS.

CBCP: 72897
BEAM ANGLE: 12
AROMAT ELECTRONIC BALLAST

DATE: FEB 26, 2004
CERTIFIED TEST REPORT NO. 2488FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

DC FCL W

8' 4.6' 740 2.3' 1.9'
10' 5.8' 473 2.8' 2.4'
12' 6.9' 329 3.4' 2.9'
15' 8.7' 210 4.2' 3.6'
20' 11.5' 118 5.6' 4.9'

30° Aiming Angle

Horizontal Surface

30° Aiming Angle

Horizontal Surface

30° Aiming Angle

Vertical Surface

DC FCL W

2' 3.5' 1610 1.7' 0.8'
3' 5.2' 716 2.6' 1.3'
4' 6.9' 402 3.5' 1.7'
6' 10.4' 179 5.2' 2.5'
8' 13.9' 101 7.0' 3.4'

30° Aiming Angle

Vertical Surface

DC FCL W

3' 5.2' 1012 2.6' 1.3'
4' 6.9' 570 3.5' 1.7'
6' 10.4' 253 5.2' 2.5'
8' 13.9' 142 7.0' 3.4'
12' 20.8' 63 10.4' 5.0'

10,000

20,000

30,000

40,000

ANGLE WALL 150W PAR38 CERAMIC - SPOT
0 2034
5 2897
10 4305
15 9181

60°

30°

20 19173
25 33229
30 41456
35 32864
40 17863
45 8682
50 3530
55 544
60 62
65 18
70 0
75 0
80 0
85 0
90 0

AIMED 30º. TOWARD WALL
LAMP: 150W PAR38 SP CERAMIC MH,

SYLVANIA
LUMEN RATING: 9100 LMS.

CBCP: 41456
BEAM ANGLE: 18
AROMAT ELECTRONIC BALLAST

DATE: APR 7, 2004
CERTIFIED TEST REPORT NO. 2583FR

COMPUTED BY LSI PROGRAM
**TEST-LITE**

30° Aiming Angle

Horizontal Surface

DC FCL W

8' 4.6' 421 3.4' 2.9'
10' 5.8' 269 4.3' 3.7'
12' 6.9' 187 5.1' 4.4'
15' 8.7' 120 6.4' 5.5'
20' 11.5' 67 8.5' 7.3'

DC FCL W

3' 5.2' 576 4.1' 1.9'
4' 6.9' 324 5.5' 2.5'
6' 10.4' 144 8.2' 3.8'
8' 13.9' 81 11.0' 5.1'
12' 20.8' 36 16.4' 7.6'

Job Information Type:

30° Aiming Angle

Vertical Surface

Lightolier a Genlyte Thomas Company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division) • A0504