C700
Top View
Remodel (C700RM)
Frame-In Kit
Calculite
®
Incandescent Open Downlight C7055
Page 1 of 2 7 3/8" Aperture A21 / A23 / PS25
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Socket Cup: Die-cast aluminum effectively dissipates heat and assures
lamps maintain proper optical alignment to reflector. Snaps onto reflector
neck for easy tool-less installation. Tool-less adjustable inside or outside fixture to accommodate three different lamp sizes. Medium base porcelain
socket with nickel plated screw shell wired and No 18 SF1 leads to J-Box.
2. Mounting Brackets: Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use standard 3/4” or 1 1/2” lathing channels, or 1/2”
(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.
3. Retaining Springs: Precision tooled springs secure reflector to mounting
frame for quick tool-less installation.
4. Reflector: 16 ga. Specular Alzak®aluminum, 45˚ visual cutoff to lamp and
lamp image. Available with white or polished flange, or with removable
white molded trim ring (field paintable).
5. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box allows inspection from
below.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
7. Mounting Frame: Die-cast aluminum suitable for dry or plaster ceilings.
Provides flangeless trim in plaster ceiling.
8. Multi-Groove Baffle (C7055MG): One piece seamless aluminum. Sharply
detailed concentric rings with “sawtooth” profile, optical black finish.
Permanently fastened to specular clear reflector.
9. Black Cone (C7055BK): Specular black Alzak®aluminum. Permanently fas-
tened to specular clear reflector.
Other Reflector Finish Options
Comfort Clear Diffuse CCD Specular Black BK
Specular Gold GD Multi-Groove Baffle MG
White WH (MG available with molded trim ring only)
Specify desired flange
W White, P Polished Flange, Flangeless Leave Blank (molded trim ring)
Options & Accessories
18" Mounting Bars 1950 (set of 2)
27" Mounting Bars 1951 (set of 2)
T-Bar Anchor Clips 1956 (set of 4, for 1950 & 1951 bars)
Existing Ceiling Clips 7998 (set of 2)
Sloped Ceiling Adapters 7920 (see SCA specification sheet)
Step Down Transformer 7997 (377V PRi, 120V Sec. 300W)
Chicago Air Plenum LC (add suffix to Frame-In Kit)
Electrical
C700 UL Listed for through branch circuit wiring with max. of (8) No. 12
AWG 90°C supply conductors.
C700RM UL Listed for No. 12 AWG 60° C supply conductors.
Labels
UL Listed for damp locations, I.B.E.W.
Remodeler Frame-In Kit Lamp
C700RM (for use in existing ceilings Same as C700
with 3/8" min. to 2" max. thickness.)
Alzak
®
is a registered trademark of ALCOA.