Lightolier C6DAIC User Manual

Calculite

20 3/4"

*11 5/8" min. is for up to 1/2" thick ceiling.

24 1/4"

10 1/4"

12 1/8" max.

11 5/8" min.*

11 1/8"

1" Max. Ceiling Thk.

Adjustment (mounting bars included)

13 3/4" to 24"

13 1/2"

18 1/8"

Evolution Recessed Downlight C6DAIC

Page 1 of 1 6" Aperture Deep Incandescent 120V IC AirSeal® Frame-In Kit

Ceiling Cutout: 6 11/16” Dia.

Frame-In Kit Reflector Trim

C6DAIC Open Open Adjustable Open Lensed

Downlight Downlight Accent Wall Washer/Downlight Wall Washer

C6AD C6P38D C6P38A C6AW C6P38L 100W A19, MB19 120W PAR38 90W PAR38 100W BT15, MB19 90W PAR38 100W BT15 200W A21 200W A21

Features

1. Outer Housing: Raw aluminum 0.036" (18ga.) allows for heat dissipation.

2. Housing: Steel, 0.03" (22 ga.). Top Cover: Aluminum, 0.04" (14 ga.). Matte

3. Mounting Frame: Die-cast aluminum for dry or plaster ceilings. Locks into

4. Retaining Springs: Precision-tooled steel springs secure reflector trim to

5. Mounting Bars: Galvanized steel, 0.06" (16 ga.). Bars pivot for easy

6. Snap-In Connector s: Keyed to accept power and socket harnesses

7. Junction Box: Galvanized steel .063" (14 ga.). UL listed for maximum of

8. Thermal Protector: Meets NEC and UL requirements.

9. Reflector Trim: Compatible reflector trims are listed above. See separate

Top and bottom covers, aluminum 0.050" (16 ga.). Top cover removable for top access.

black finish. AirSeal® housing minimizes air leakage to less than 2CFM at

1.57 PSF (or 75pa) in accordance with ASTM E283, which complies with Model Energy Code and Washington State Energy Code and reduces heat loss and condensation in ceiling.

position along length of mounting bars with locking screws.

mounting frame for quick, tool-less installation.

installation and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Integral self-tapping screws secure to wood or metal construction. Built-in tabs for locking to T-bars without the need of accessories.

which are provided with reflector trim.

4 No. 12 AWG 90°C through branch circuit conductors. Accessible from inside and outside of fixture. Outside J-Box door is hinged for maximum opening. Snap-in plug is provided on inside cover for quick connection to power harness.

reflector trim specification sheets for complete catalog numbers and details.

Options & Accessories

Chicago Plenum Consult Factory

Labels

UL Listed (Type I.C., Suitable for damp locations), I.B.E.W. Complies with Air Leakage Requirements stated in the Model Energy Code, Washington State Energy Code and Title 24.

US Patent No. 5,9 57,573. Other US and Foreign Patents Pending.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s): Notes:

Lightolier a Genlyte company www.lightolier.com