Lightolier C6AICLV User Manual

Calculite

1" Max. Ceiling Thk.

Adjustment (mounting bars included)

13 3/4" to 24"

20 1/4"

17 3/4"

10"

14 1/4"

7143

9 1/4"

10 1/4" max.

9 3/4" min.

9 3/4" min. is for up to 1/2" thick ceiling.

8 1/2"

Evolution Recessed Downlighting C6AICLV

Page 1 of 1 6" Aperture PAR36 Low Voltage IC AirSeal® Frame-In Kit

Ceiling Cutout: 6 11/16” Dia.

Frame-In Kit Reflector Trim

C6AICLV Adjustable Accent

C6P 36A

35W - 75W PAR36 (12V) 25W PAR36 (5.5V) 35W - 75W AR111 (12V)

Features

1. Outer Housing: Raw aluminum 0.036" (18ga.) allows for heat dissipation.

2. Housing: Steel, 0.03" (22 ga.). Top Cover: Aluminum, 0.04" (14 ga.). Matte

3. Mounting Frame: Die-cast aluminum for dry or plaster ceilings. Locks into

4. Retaining Springs: Precision-tooled steel springs secure reflector trim to

5. Mounting Bars: Galvanized steel, 0.06" (16 ga.). Bars pivot for easy

6. Transformer: Magnetic, 120V tap primar y, nominal 12V and

7. Snap-In Connector s: Keyed to accept power and socket harnesses

8. Junction Box: Galvanized steel .063" (14 ga.). UL listed for maximum of

9. Thermal Protector: Meets NEC and UL requirements.

10. Reflector Trim: Compatible reflector trims are listed above. See separate

Top and bottom cover: aluminum 0.050" (16 ga.). Top cover removable for top access.

black finish. AirSeal® housing minimizes air leakage to less than 2CFM at

1.57 PSF (or 75pa) in accordance with ASTM E-283, which complies with Model Energy Code and Washington State Energy Code and reduces heat loss and condensation in ceiling.

position along length of mounting bars with locking screws.

mounting frame for quick, tool-less installation.

installation and wire-in below ceiling line. Bars extend to accommodate 16" to 24" O.C. joist spacing. Integral self-tapping screws for secure to wood or metal construction. Built-in tabs for locking to T-bars without the need of accessories.

5.5V secondary.

which are provided with reflector trim.

4 No. 12 AWG 90°C through branch circuit conductors. Accessible from inside and outside of fixture. Outside J-Box door is hinged for maximum opening. Snap-in plug is provided on inside cover for quick connection to power harness.

reflector trim specification sheets for complete catalog numbers and details.

Options & Accessories

Chicago Plenum Consult Factory

Electrical

Use with dimmers rated for low voltage lamps and magnetic transformers. Consult Lightolier Controls Catalog.

Labels

UL Listed (Type I.C., Suitable for damp locations), I.B.E.W. Complies with Air Leakage Requirements stated in the Model Energy Code, the Washington State Energy Code and Title 24.

US Patent No. 5,9 57,573. Other US and Foreign Patents Pending.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s): Notes:

Lightolier a Genlyte company www.lightolier.com