Lightolier C4X9LEDLW240 User Manual

Calculite

10 1/2"

(267mm)

5 3/4" (146mm)

4 1/2" (115mm)

8137

1911

12 2

10 1/2" (93mm)

9 1/8" (93mm)

9 5/16" (237mm)

Vertical Adjustment 5/8" (16mm) 2 7/8" (73mm)

20" (508mm) to 30" (762mm)

18 1/2" (470mm)

2" (51mm) max. ceiling thk.

13 3/8" (340mm)

ColorWash C4X9LEDLW240

Page 1 of 2 4 1/2" X 9 1/8" Aperture, LED Color-Changing Matrix® Wall Washer for Export

Ordering Information

Solid State Lighting Unit Light Source Frame-In Kit Line Voltage

White Flange Polished Flange Finish

C4X9LEDLWCLW C4X9LEDLWCLP C4X9LEDLWCCLW C4X9LEDLWCCLP

C4X9LEDLWCCDW C4X9LEDLWCCDP

Specular Clear

Comfort Clear

Comfort Clear Diffuse

RGBA LED Array

C4X9CCLEDLW240

240, 50Hz

Features

1. Heat Sink Housing: Die-cast aluminum, design thermally optimized to

reduce LED junction temperature to maintain light output, color and life.

2. LED Array: Series of 48 high-power red, green, blue and amber (RGBA)

LEDs generate millions of colors and high quality white light at variable color temperatures. Static colors and dynamic effects are programmable by DMX controls. Average expected life, under normal operating conditions is 50,0 00 hours with lumen maintenance of 70% of original light output. Factory calibrated integral color sensor and self-adjusting feedback soft ware guarantee color consistency over life.

3. Aper ture Cone: Pre-finished aluminum, 55° visual and reflected cutoff.

Overlap flange accommodates different ceiling types, white or polished flange. Precision mitered flange corner. 4. MicroBlend optics: Internal collective mixing technology ensures smooth washing and color uniformit y and eliminates undesirable color fringing.

5. Aper ture Lens: Tempered glass, fine texture provides additional mixing at

the aperture and minimizes the appearance of the individual RGBA sources.

6. Torsiontite Springs: Secure solid state lighting module tight against ceiling

surface without sagging. Accommodates ceilings from ½” to 2” thick.

7. Power Supply Unit /Slave Control Drive Module: PSU: 240VAC 50/60

Hz., Class 2, high power factor, FCC Class B approved, short circuit protection. SCD: low voltage DC, provides power and data to control LED array with a maximum of 8 LED channels. Electronics are enclosed in a black extruded aluminum housing providing optimal thermal dissipation for reliable operation and long life. Module is replaceable from below the ceiling.

8. DMX Connectors: Two RJ45 jacks mounted at one end of PSU/SCD module

provide DMX512-In and DMX512-Out connections (see page 2). Uses standard shielded, plenum rated, CAT5 round, 8 conductor, twisted pair, network cables (not supplied).

9. Flexible Metal Conduit/Quick Connector: Quick connector for easy field

data connection.

10. Mounting Frame: 0.048" thk., galv. steel.

Features (continued)

11. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism

accommodates mounting to virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures all adjustments. Alignment holes and markings allow fixture to be pre-set

prior to installation.

12. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to

30"long and lock securely into position. Built-in locking tabs provide positive attachment to common T-bar systems. Self-centering feature simplifies installation in 24" O.C. grid systems. Attaches to steel or wood joists without

accessories.

13. Junction Box: UL and cUL Listed for through branch circuit wiring with max.

of (8) No. 12 AWG, 90 ºC supply conductors.

14. Thermal Protector: Meets (NEC) UL and (CEC) CSA requirements. Insulation

must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat.

Electrical

240V, 50/60Hz: Input Watts: 75W Max.

Labels

cULus Listed for dr y locations. I.B.E.W.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s): Notes:

Lightolier is a Philips group brand

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Calculite

Lightolier Lytemode

DMX Master Station

LIGHTOLIER

LYTEMODEÆ

DMX CONTROL

SYSTEM

Strand Lighting

Accent DMX

CAT5 (8) wires round cable with RJ45 plugs (by others)

DMX512 Out

DMX512 In

DMX512 Out To Next Luminarie

DMX512 Out

DMX512 In

120VAC 60 HZ. Power Input

RJ45 DMX Terminator (Required to terminate the last luminaire in the same data line)

DMX512 Out

Shielded CAT5 9 Pin Connector Wiring

ILS Network (optional)

Mini Master

(order seperately)

Stand-Alone Accent DMX

Entertainment Technology

DMX Control

Connected Console or Computer to create scenes

OPTIONS DMX512 Systems*

RJ45 jacks

Color-Changing Lensed Wall Washer

Horizon 512 Channel DMX Interface or others

Other Standard

DMX512 Interface

Control

DMX Interface XLR-5 Port (Female)

Receptacle (By Others)

DMX512 Cable

DMX512 In

RJ45 jacks

Color-Changing Lensed Wall Washer

240VAC 50/60HZ. Power Input240VAC 50/60HZ. Power Input

CAT5 (8) wires round cable with RJ45 plugs (by others)

* All systems shown are stand-alone. For additional information and other DMX systems, please visit http://www.genlyte.com/" for link to each manufacturer web site.

Input Power 120 - 240VAC 50/60HZ.

XLR-5(Femal port)

MARQUEEÆ PC DMX INTERFACE

USB Port to PC

DMX512 Cable

ColorWash C4X9LEDLW240

Page 2 of 2 4 1/2" X 9 1/8" Aperture, LED Color-Changing Matrix® Wall Washer for Export

Lighting Data (All data is based on 3000K color temperature)

Example: With multiple units located

Color Temperature: 3000K

Repor t No: 22905

2' Fro m Wall - Single 2' Fro m Wall - 2' On Center 2' Fro m Wall - 3' On Center 2' Fro m Wall - 4' On Center

1 1 4 27 4 1 1 38 34 38 1 31 18 31 1 28 9 28 2 1 8 34 8 1 2 54 52 54 2 41 30 41 2 37 17 37 3 1 9 24 9 1 3 46 45 46 3 32 29 32 3 27 18 27

4 2 7 14 7 2 4 33 33 33 4 23 22 23 4 18 15 18 5 2 5 8 5 2 5 24 24 24 5 16 16 16 5 12 11 12

6 1 3 5 3 1 6 18 18 18 6 12 12 12 6 9 9 9 7 1 2 3 2 1 7 13 13 13 7 9 9 9 7 7 7 7

8 1 2 2 2 1 8 10 10 10 8 7 7 7 8 5 5 5 9 1 1 1 1 1 9 9 8 9 9 6 6 6 9 4 4 4

3' Fro m Wall - Single 3' Fro m Wall - 3' On Center 3' Fro m Wall - 4' On Center 3' Fro m Wall - 5' On Center 3' From W all - 6' On Center

1 1 3 8 3 1 1 12 10 12 1 10 7 10 1 9 3 9 1 9 3 9 2 1 6 15 6 1 2 22 20 22 2 18 13 18 2 16 6 16 2 16 6 16 3 2 7 15 7 2 3 25 24 25 3 20 18 20 3 18 12 18 3 17 8 17

4 2 7 13 7 2 4 23 23 23 4 18 16 18 4 16 12 16 4 14 9 14 5 2 6 9 6 2 5 19 19 19 5 14 14 14 5 12 11 12 5 11 8 11

6 2 5 6 5 2 6 16 16 16 6 12 11 12 6 10 9 10 6 8 7 8 7 2 3 4 3 2 7 13 13 13 7 9 9 9 7 8 7 8 7 7 6 7

8 2 3 3 3 2 8 10 10 10 8 7 7 7 8 6 6 6 8 5 5 5 9 1 2 2 2 1 9 9 8 9 9 6 6 6 9 5 5 5 9 4 4 4

3' from wall and spaced 4' on center, the illumination on the wall 3' down from ceiling will be 20 f.c. beneath units and 16 f.c. between units. Footcandle values are averaged and rounded off and are based on a minimum of five units.

DMX Network

Lightolier is a Philips group brand

Accessories

Addressable Interface Kit: Cat. No. CLEDAIK

Load addresses and select operating mode for DMX protocol, load serial numbers and specific lighting preset, update firmware to each LED lighting unit

DMX Terminator: Cat. No. CLEDDMXTERM Stepdown Transformer: Cat. No. 7997.

Supplies 120V fixture from a 277V 60Hz. branch circuit (20 amp. minimum). Can be used up to (4) fixtures (not to exceed 300W maximum load).

Job Information Type:

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.