Lightolier C4T4A-MHT4RS User Manual

Calculite

®

HID Adjustable Accent C4T4A-MHT4RS

Page 1 of 2 4 1/2” Aperture, T4.5, Ceramic Metal Halide, 12° Spot

Spot

Upper Reflector

Ceiling Cutout: 5 1/8” (130mm) Dia.
For Complete Fixture Order: Trim Kit + Spot Upper Reflector (MHT4RS) + Frame-In Kit. Each Sold Separately.

Trim Kit + Spot Upper Reflector Frame-In Kit Lamp

C4T4A + MHT4RS (Spot Upper Reflector)

CLW Specular Clear,White Painted Flange
CLP Specular Clear,Matching Flange

CCDW Comfort Clear Diffuse, White Painted Flange
CCDP Comfort Clear Diffuse, Matching Flange
CCZW Champagne Bronze,White Painted Flange
CCZP Champagne Bronze, Matching Flange

C4A20T4E1 Electronic 120V 20W T4.5 Ceramic MH
C4A20T4E2 Electronic 277V 20W T4.5 Ceramic MH
C4A39T4E1 Electronic 120V 39W T4.5 Ceramic MH
C4A39T4E2 Electronic 277V 39W T4.5 Ceramic MH
C4A70T4E1 Electronic 120V 70W T4.5 Ceramic MH
C4A70T4E2 Electronic 277V 70W T4.5 Ceramic MH

Features

1. Spot Upper Reflector: Specular faceted aluminum; provides 12° beam.

Interchangeable with 25° Narrow Flood (MHT4RNF) and 40°Flood (MHT4RF);
see spec sheets C4T4A-MHT4RNF and C4T4A-MHT4RF.

2. Trim Kit: Low brightness aperture cone; anodized aluminum, self-flanged in
painted white or aperture-matching polished flange. Consult factory for other
finishes.

3. Lamp Shield: High-temperature glass as required by code; captive during
re-lamping.

4. Trim Kit Adjustment Mechanism: Provides 35°vertical tilt, 360° horizontal
rotation; lockable. Patented EZ-Aim Helical Drive System provides fast and
accurate hot aiming with Philips screwdriver.

5. Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated socket.
Snaps onto yoke for secure attachment without tools; unitized construction
assures proper alignment of lamp to optics for consistent optical performance.

6. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover
for top re-lamping.

7. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.

8. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.

9. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.

10.Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .

11. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90° C through branch circuit conductors. Allows inspection from below.

12. Optional Accessory Holder: Sold separately catalog # CAH4; die-formed
steel, matte black finish, slide-in installation. Accepts up to two 3 3/4" dia.
media.

Features (cont.)

13.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not

install insulation above nor within 3" (76mm) of any part of the luminaire.

Electrical

Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.

<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating “A”,

-5° F minimum starting temperature, Type 1 Outdoor rating.

Ballast ANSI Code Voltage Max. Amps Input Watts

20W MH M156 120/277 0.21/0.10 23
39W MH M130 120/277 0.39/0.17 44

70W MH M139 120/277 0.67/0.29 78

Options and Accessories

Chicago Plenum: Consult Factory

Labels

UL (Suitable for Damp Locations), CSA, I.B.E.W.

Job Information Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte Thomas Company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504

Calculite

®

HID Adjustable Accent C4T4A-MHT4RS

Page 2 of 2 4 1/2” Aperture, T4.5, Ceramic Metal Halide, 12° Spot

(FC) is initial footcandles at center of
beam. Beam length (L) and beam width
(W) are to where the candlepower is
reduced to 50% of the center beam
candlepower. (C) is the distance to the
center of the beam.



CANDLEPOWER DISTRIBUTION 20W LAMP T4.5 – SPOT UPPER REFLECTOR

ANGLE WALL
0 224
5 305
10 411
15 504
20 1527
25 5611

60°

30 9201

30°

60°

30°

35 4107
40 426
45 66
50 20
55 8
60 3
65 0
70 0
75 0
80 0
85 0
90 0

ANGLE WALL
0 359
5 474
10 646
15 886
20 2519
25 8378
30 15143
35 9185
40 2124
45 379
50 59
55 16
60 0
65 0
70 0
75 0
80 0
85 0
90 0

4,500

6,750

9,000

CANDLEPOWER DISTRIBUTION 39W T4.5 – SPOT UPPER REFLECTOR

10,000

15,000

20,000

AIMED 30° TOWARD WALL
T4 20W G.E. METAL HALIDE LAMP

LUMEN RATING = 1700 LMS.
CBCP= 9,201cd

BEAM ANGLE = 11°
AROMAT 20W ELECTRONIC BALLAST

DATE: OCT 30, 2003
CERTIFIED TEST REPORT NO. 2351FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**

AIMED 30° TOWARD WALL
T4 39W PHILIPS METAL HALIDE LAMP

LUMEN RATING = 3300 LMS.
CBCP= 15,143 cd

BEAM ANGLE = 12°
AROMAT 39W ELECTRONIC BALLAST

DATE: OCT 30, 2003
CERTIFIED TEST REPORT NO. 2350FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**

30° Aiming Angle

Horizontal Surface

DC FCL W

6' 3.5' 166 1.5' 1.3'
8' 4.6' 93 2.1' 1.8'
10' 5.8' 60 2.6' 2.2'
12' 6.9' 42 3.1' 2.7'
15' 8.7' 27 3.9' 3.3'

30° Aiming Angle

Horizontal Surface

DC FCL W

8' 4.6' 154 2.3' 1.9'
10' 5.8' 98 2.8' 2.4'
12' 6.9' 68 3.4' 2.9'
15' 8.7' 44 4.2' 3.6'
20' 11.5' 25 5.6' 4.9'

30° Aiming Angle

Vertical Surface

DC FCL W

2' 3.5' 288 1.6' 0.8'
3' 5.2' 128 2.4' 1.2'
4' 6.9' 72 3.2' 1.5'
6' 10.4' 32 4.8' 2.3'
8' 13.9' 18 6.3' 3.1'

30° Aiming Angle

Vertical Surface

DC FCL W

3' 5.2' 210 2.6' 1.3'
4' 6.9' 118 3.5' 1.7'
6' 10.4' 53 5.2' 2.5'
8' 13.9' 30 7.0' 3.4'
12' 20.8' 13 10.4' 5.0'

CANDLEPOWER DISTRIBUTION 70W T4.5 – SPOT UPPER REFLECTOR

15,000

22,500

30,000

60°

30°

ANGLE WALL
0 569
5 804
10 1315
15 2448
20 6705
25 20862
30 32535
35 21397
40 6307
45 1906
50 472
55 73
60 23
65 7
70 0
75 0
80 0
85 0
90 0

AIMED 30° TOWARD WALL
T4 70W PHILIPS METAL HALIDE LAMP

LUMEN RATING = 6400 LMS.
CBCP= 32,535 cd

BEAM ANGLE = 13°
AROMAT 70W ELECTRONIC BALLAST

DATE: OCT 25, 2003
CERTIFIED TEST REPORT NO. 2345FR
COMPUTED BY LSI PROGRAM
**TEST-LITE**

30° Aiming Angle

Horizontal Surface

DC FCL W

8' 4.6' 330 2.4' 2.1'
10' 5.8' 211 3.1' 2.6'
12' 6.9' 147 3.7' 3.2'
15' 8.7' 94 4.6' 3.9'
20' 11.5' 53 6.1' 5.3'

30° Aiming Angle

Vertical Surface

DC FCL W

3' 5.2' 452 2.8' 1.4'
4' 6.9' 254 3.8' 1.8'
6' 10.4' 113 5.7' 2.7'
8' 13.9' 64 7.6' 3.6'
12' 20.8' 28 11.4' 5.5'

Job Information Type:

Lightolier a Genlyte Thomas Company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504