Lightolier C4MRGD User Manual

Calculite
346215
* 6" min. is for up to 3/4" thick ceiling.
3 7/8" Dia.
5 1/2" Dia.
5 1/4"
6" min.*
6 1/2" max.
1 1/8" Max. Ceiling Thk.
C4MRGD / C4ALV
C4MRGD / C4LV or
C4MRGD / C4AICLV
9 1/4"
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
5" (127mm)
12 5/8"
(321mm)
14 3/8"
(365mm)
10 1/8"
(257mm)
9" (229mm)
11 3/16" (284mm)
22 3/8"
(568mm)
14 5/8"
(372mm)
C4AICLV
C4ALV C4LV
®
Evolution Glasslite C4MRGD
Page 1 of 2 4 1/2" Aperture MR16 Glasslite Downlight
Ceiling Cutout: 5 1/16" (129 mm) Dia.
Reflector Trim Frame-In Kit
C4MRP WH
Note: Magnetic transformers may produce audible sound when used with
dimmers, which may be objectionable in acoustically critical areas.
Etched White
Interior and Flange
Non-IC 120V/277V Non-IC AirSeal® 120V/277V IC AirSeal® 120V
C4LVMU
C4LVE1 Electronic 120V
C4LVE2
42-75W MR16(12V)
Magnetic 120/277V
Electronic 277V 42-75W
C4ALVMU
C4ALVE1
MR16(12V)
Magnetic 120/277V C4AICLV M1 Magnetic 120V
Electronic 120V
Lensed, Horizontal Lamping
C4AICLV E1
20-50W MR16(12V)
Remodel Frame-In Kit
Non-IC 120V
C4LVE1RM 50W Max. MR16 (12V)
See separate specification sheet for more
information.
Electronic 120V
Features
1. Glasslite: One piece borosilicate glass with integral flange, etched interior
and white ceramic coated exterior. Etched white cone finish emits a subtle glow. Hinged, and snaps onto lampholder assembly for easy tool-less installation. Inter-changeable with other Evolution 4 1/2" low voltage trims. Suitable for spas, hot tubs and other wet environments.
2 Lampholder Assembly: Die-cast aluminum. Built-in aperture shield. Matte
black finish. Lamp shield keeps interior of fixture dark.
3. Lamp Support: Die-formed aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast snap-in, snap-out relamping. Matte black finish.
4. Socket Harness: Porcelain bi-pin socket. Pre-wired with No. 18
Tef lon® leads.
5. Power Harness: Provides power to transformer.
6. Frame-In Kit: Compatible frame-In kits are listed above. See separate
frame-in kit specification sheets for details. Non-IC and Non-IC AirSeal®- Insulation must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a
manner which will entrap heat.
IC-AirSeal®- Fixture may be in direct contact with insulation.
10. Maximum Ceiling Thickness: .875", 1.75" with C4TCA2 accessory
(see C4TCA2 specification sheet for details.)
Lightolier is a Philips group brand
Options & Accessories
Evolution 4” Trims with Non-IC Frames C4MRGD 1 Secondary Color Lens or 1 Mixing Color Lens and 1
Specialty Filter
Labels
CULUS Listed (suitable for wet locations), I.B.E.W.
Tef lon® is a registered trademark of E.I. DuPont.
US Patent No. 5,957,573. Other US and Foreign Patents Pending.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0708
Job Information Type:
Job Name:
Cat. No.:
Lamp(s): Notes:
Calculite
(6' x 6' x 8.5' room)
(12' x 12' x 8.5' room)
(60' x 60' x 8.5' room)
80% Ceiling; 50% Wall; 20% Floor
Room Surface Reflectances:
1100 Lumens Per Lamp
RCR = 5
RCR = 1
Glass Lens with 65W MR16 FL
CENTER TO CENTER DISTANCE OF FIXTURES IN FEET
AREA PER FIXTURE IN SQUARE FEET
INITIAL FOOTCANDLES
109876543
908070605040302010
60
50
40
30
20
10
RCR = 10
Use quick calculator chart to determine spacing of luminaires for desired level of illumination. Conversion Factors:
20W MR16 FL: F.C. X 0.2
35W MR16 FL: F.C. X 0.5
37W and 50W MR16 FL: F.C. X 0.7
(6' x 6' x 8.5' room)
(12' x 12' x 8.5' room)
(60' x 60' x 8.5' room)
80% Ceiling; 50% Wall; 20% Floor
Room Surface Reflectances:
1100 Lumens Per Lamp
RCR = 5
RCR = 1
Glass Lens with 65W MR16 FL
CENTER TO CENTER DISTANCE OF FIXTURES IN FEET
AREA PER FIXTURE IN SQUARE FEET
109876543
908070605040302010
RCR = 10
ACROSS 45 ALONG
180 150
1000
2000
3000
50
60
®
Evolution Glasslite C4MRGD
Page 2 of 2 4 1/2" Aperture MR16 Glasslite Downlight
SPACING RATIO = 0.7
CERTIFIED TEST REPORT NC. 0993FR
COMPUTED BY LSI PROGRAM **TEST-LITE**
CALCULITE 4 1/2” DIA. APERTURE MR16 GLASS DOWNLIGHT GLASS REFLECTOR
65W MR16 SYLVANIA 40 DEG. FL. LAMP LUMEN RATING - 1100 LMS.
CANDLEPOWER SUMMARY
ANGLE MEAN CP LUMENS 0 1774 5 1666 156 10 1421 15 1199 334 20 893 25 420 213 30 108 35 30 29 40 14 45 7 7 50 6 55 5 4 60 4 65 3 3
70 2
75 1 1 80 0 85 0 0 90 0 ZONAL LUMENS AND PERCENTAGES
ZONE LUMENS % LAMP % LUMINAIRE 0-30 702 63.89 94.20 0-40 731 66.49 98.02 0-60 702 67.49 99.50 0-90 746 67.83 100.00 40-90 14 1.34 1.98 60-90 .3 .34 .50
DATE: DEC. 20, 1999 PREPARED FOR LIGHTOLIER, FALL RIVER, MA
90-180 0 .00 .00 0-180 746 67.83 100.00
**EFFICIENCY =67.8% **
TESTED ACCORDING TO TEST PROCEDURES. TEST DISTANCE EXCEEDS FIVE TIMES
THE GREATEST LUMINOUS OPENING OF LUMINAIRE.
COEFFICIENTS OF UTILIZATION
80 70 50 30 10 0
% EFFECTIVE CEILING CAVITY REFLECTANCE
% WALL REFLECTANCE
50 30 10 50 30 10 50 30 10 50 30 10 50 30 10 0 1 .77 .76 .75 .76 .75 .74 .73 .72 .71 .70 .70 .69 .68 .68 .67 .66
Lightolier is a Philips group brand
2 .74 .72 .71 .73 .71 .70 .71 .69 .68 .69 .68 .67 .67 .66 .66 .65 3 .71 .69 .67 .70 .69 .67 .69 .67 .66 .67 .66 .65 .66 .65 .64 .63 4 .36 .67 .65 .68 .66 .64 .67 .65 .64 .66 .64 .63 .65 .63 .62 .62 5 .67 .64 .62 .66 .64 .62 .65 .63 .62 .64 .62 .61 .63 .62 .61 .60 6 .65 .62 .61 .64 .62 .60 .64 .62 .60 .63 .61 .60 .62 .60 .59 .59 7 .63 .60 .59 .63 .60 .58 .62 .60 .58 .61 .59 .58 .60 .59 .58 .57
ROOM CAVITY RATIO
8 .61 .59 .57 .60 .58 .57 .60 .58 .57 .60 .58 .56 .59 .57 .56 .55 9 .59 .57 .55 .59 .57 .55 .59 .56 .55 .58 .56 .55 .58 .56 .55 .54 10 .58 .55 .54 .58. 55. 54 .57 .55 .54 .57 .55 .53 .56 .55 .53 .53
20% FLOOR CAVITY REFLECTANCE
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0708
Loading...