Lightolier 8611E User Manual

4 11/16"

5"

2"

1 1/8"

4

8

2

7

1

6

5

9

3

Lytespan

Accent Lighting System 8611E

Page 1 of 1 LyteJacks Surface Power Jack

8611E

®

Catalog No. Finishes Mounting Use With

8611EWH Matte White To 4" Octagonal Lytedrop or Focal Jack Luminaires

8611EBK Matte Black Outlet Box 50W Max.

8611EAL Aluminum Ceiling Mount

Features

1. Canopy/Transformer Cover: Cast Aluminum. .1" nominal wall thickness

2. Mounting bracket: Steel, attached to J-Box for mounting PowerJack.

3. Plug Jack: Molded high heat resistant polymer. Accepts all LyteJack fix-

tures

4. Insulated Wires: To be attached to 120V 60Hz. Supply circuit. Supply wires
must be rated for minimum temperature of 75°C.

5. Plug Jack Support: Die-cast aluminum. Holds plug jack rigidly to ensure
proper engagement and operation of LyteJack fixtures.

6. Polycarbonate Stem Bushing: Accurately guides LyteJacks into plug jack.

When using Lytedrops, remove by using a coin such as a dime.

7. Mounting Screws: (2) Steel screws painted to match fixture color.
Attaches power jack to mounting bracket.

8. 4" Octagonal Outlet Box: (By others).

9. Insulated Ground Wire: 18Ga wire attached to canopy and connected to

the mounting bracket during insulation.

Electrical

60 Watt Class 2 low voltage (12V) Electronic transformer with auto-reset
thermal cut off. Supply circuit must be 120V-60Hz.

Dimming

Use only dimmers specifically designed for use with electronic transformers.
Low voltage fixtures may produce audible sound when dimmed.

Finish

All painted finishes baked enamel.

Labels

UL; CUL

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • A0206