Lightolier 6000 User Manual

Basic Lytespan
Plain Track
Individual Track
Joiner Track
/16"
1-5/32"
2
5
3/4"
1
6
4
3
Joiner Track Joiner Track
96"
45-1/16" 93-1/16"
141-1/16"
21-1/16" 45-1/16" 93-1/16"
23-25/32" 47-25/32" 95-25/32"
96" 96"
3/32"
7 9
Individual Track
8
®
1 Circuit Track 6000
Page 1 of 4
6000NWH
6000NBK
6000NAL
60 01NWH
60 01NBK
60 01NAL
6002NWH
6002NBK
6002NAL
6003NWH
6003NBK
6003NAL
6004NWH
6004NBK
6004NAL
6008NWH
6008NBK
6008NAL
6046NWH
6046NBK
6048NWH
6048NBK
6049NWH
6049NBK
6050NWH
6050NBK
60 51NWH
60 51NBK
6052NWH
6052NBK
6053NWH
6053NBK
6054NWH
6054NBK
6060NWH
6060NBK
60 61NWH
60 61NBK
6062WH
6062BK
6062NAL
6063WH
6063BK
6063NAL
26082
6087
6088
6089
748 0
748 0AL
748 1
7582
7582AL
7584
7586
7586AL
Finishes Individual Track Joiner Track Plain Track
Includes Live End Feed Connector Includes Mini Coupler Includes Dead End
2' Catalog No. 4’ Catalog No. 8’ Catalog No. 8’ Catalog No. 4’ Catalog No. 8’ Catalog No. 12’ Catalog No.
Matte White
Matte Black Met Aluminum
6000NWH 6001NWH 6002NWH 6003NWH 6004NWH 6008NWH 6 012NWH 6000NBK 6001NBK 6002NBK 6003NBK 6004NBK 6008NBK 6012NBK 6000NAL 6001NAL 6002NAL 6003NAL 6004NAL 6008NAL 6012NAL
Features
Basic Lytespan is a one circuit electrical distribution system designed to sup­port and supply all Lytespan lighting units in a flexible manner. The track can be installed individually in straight runs or in a variety of pat terns.
1. Basic Lytespan Track: 6063-T5 structural aluminum extrusion.
2. Track Mounting Clips: 0.024 Spring steel, in black or white; furnished with
track units.
3. Toggle Bolt & Screws: furnished with track units.
4. Conductor (2): copper 12 ga. equivalent. “U” shape provides reliable contact
with connectors.
5. Insulating Liner: 0.032" wall, high temperature thermoplastic.
6. Polarity Bead: identifies the neutral conductor.
7. Live End: molded thermoplastic. Contains contacts for power supply leads.
8. Dead End Cover: molded thermoplastic.
9. Mini Coupler: connects track units mechanically and electrically.
Mounting
The track may be surface or stem mounted (see pages 2, 3, and 4) or installed in a recessed housing (see Specification sheet 7515). The track is not intended to be cable mounted. All lengths can be field cut.
Finish
All painted finishes are baked enamel.
Electrical
Capacity is 20 amps. at 120 volts per branch circuit (2400 wat ts incandescent load). The track units are polarized and continuously grounded throughout. Electrical conductors are concealed in a insulating liner. Intended for wiring to branch circuit building wire with ground. All wiring must be in accordance with
National and Local Codes.
Mechanical
Track units plug together and lock securely to prevent accidental separation. Lytespan lighting units can be at tached at any point along the track.
Labels
cUL; I.B.E.W.; U.S. Patent Nos. 4,096,349; Other Patent Pending
Job Information Type:
Job Name:
Cat. No.:
Lamp(s): Notes:
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0908
Page 2 of 4
4" Octagon Outlet Box (by others)
T-Bar
T-Bar Mounting
Clip
Track
Track Mounting Clips
Recommended: 2 clips per 2' & 4' track, 3 clips per 8' and 12' track units, order separately. Attaches to track at any point. Clip is nylon coated. Spaces track 1/16" from ceiling.
Not recommended for wall mounting.
56451WH Matte White 56451BK Matte Black
Set of 10
Direct Mounting
Toggle bolts and nylon insulators are furnished with Track, two per 2' and 4' track, three per 8' and 12' track. Mount through existing holes in track. Top of track sits flush to mounting surface.
Recommended for wall and ceiling mounting.
Regressed Edge Panels and 9/16"- 15/16" T-Bar Clip is supplied assembled. Mounts easily onto T-Bars by rotating clips. Use two per 2' and 4' track, three per 8', and four per 12' track.
6087 (9) Clips
Grid Ceiling Mounting Clips
Square Edge Panels and 9/16"- 15/16" T-Bars Clip is supplied assembled. Mounts onto
T-Bars by rotating clips. Use two per 2' and 4' track, three per 8', and four per 12' track.
6089 (9) Clips
9/16"- 15/16"
Regressed
Edge Panel
T-Runner
5/16" -
13/32"
9/16" - 15/16"
Square Edge Panel
T-Runner
Slotted Grid Ceilings such as Donn Fineline
and Chicago Metallic Ultraline 3500 and
3600. Use two per 2' and 4' track, three per 8', and four per 12' track.
6088 (9) Clips
Slotted Grid Runner
5/16"
9/16"
1/4"
6096WH Matte White 6096BK Matte Black
Toggle Bolt
Nylon Spacer
Screw
Floating Canopy Kit
Mounts to a 4" or 3" octagonal outlet box. Canopy is positioned anywhere along track,
up to 4' from edge of track extrusion. Power can be fed to Live End, 'L', 'T', X', In-Line and Variable Angle Connectors. Mount track using track mounting clips. Canopy is 3/32" thick and 4-1/2" square.
1/8" &
3" or 4" Octagonal Outlet Box (by others)
Square Canopy
Saddle Canopy Kit
Mounts anywhere along track for power feed from a 4" or 3" octagon outlet box. Use Track Mounting Clips or direct mount track. Especially useful with Plain Track. Max load 20 amps @ 120V, 60Hz.
6063WH Matte White
End Feed Canopy Kit
3" or 4" Octagon Outlet Box (by others)
Fitting Outlet Box
Canopy
Grid Ceiling Canopy Kit
Mounts to a 4" or 3" octagonal outlet box. Use two per 2' or 4' track, three per 8' and 12'
track. When making a run of track do not exceed 4' between stems. Includes a special outlet box to fit onto runners. Power can be fed to Feed Track, Live End, "L", "T", "X", and In-Line connectors. Mounts along runner or at the intersection of runners.
6060WH Matte White 6060BK Matte Black 6060NAL Aluminum
Mounts directly to Live End, 'L', 'T', X', In-Line and Variable Angle Connectors. Mounts to a 4" or 3" octagonal outlet box. For track installed with mounting clips or direct mounted. Canopy is 3/32" thick and 4-1/2" square.
6061WH Matte White 6061BK Matte Black 6061NAL Aluminum
Track Mounting and Power Feed Systems
Basic Lytespan
®
1 Circuit Track 6000
Lightolier is a Philips group brand
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0908
Page 3 of 4
Stem Mounting Kits
Mounts to a 4" or 3" octagon outlet box. Use two per 2' and 4' track, three per 8' and 12' track. When making a run of track do not exceed 4' between stems. Use additional stems for additional support. Power is fed to the track with the stem closest to the track feed-in point. For power feed to Feed Track and Live End, "L", "T", "X", In-line, and Variable Angle Connectors. Stem can be field cut.
Not recommended for wall mounting.
18" Stem 48" Stem Actual length from ceiling to top of track: 1 7 3/8" 47 3/8"
Stem Extension Kit
Mounts to any stem kit to extend its length by 48". Cannot be field cut.
Swivel Stem Mounting Kits
Adjusts from 0 to 90. Mounts to a 4" or 3" octagon outlet box. Use two per 2' and 4' track, three per 8' and 12' track. When making a run of track do not exceed 4' between stems. Use additional stems for additional support. Power is fed to the track with the stem closest to the track feed-in point. For power feed to Feed Track and Live End, "L", "T", "X", In-line, and Variable Angle Connectors. Can be field cut. 48" stem.
Direct Feed into Connectors
The Live End, "L", "T", "X", In-line, and
Variable Angle Connectors contain a nut with a 1/2-14 thread to accept a 3/8" or 1/2" (trade size) electrical connector, 3/8" connector recommended. Does not require a separate power feed kit.
Stem Extension 1/2" O.D. Steel Tube 1/4-18 NPSM Thread.
Clamp Set
Power Extension Connector
Replaces Dead End Cover at end of track to permit power continuity around structural obstacles to another track section. Accepts same power feed-in kits as Live End.
Through Wall or Column
Track
Power Extention
Connector
Track
Power Extention
Connector
3/8" Connector
Jump
Wall
(Conduit)
Over Beam or Through Beam
3/8"
Connector
Track
Power Extention
Connector
Beam
Jump
Track
Power Extention
Connector
Wall
In-Line Connector
Permits power feed between track units in a straight run of track. The In-Line Connector is polarized and pre-wired. KO permits direct feed with electrical connector.
4-1/8"
Live End
Track Unit
3/8" Connector (by Others)
Conduit Adaptor
For feeding power to Live End from secure cable terminating in a 3/8" (trade size) electrical connector. Conduit must be self supporting. For use with 6048 and 6046.
7596 Zinc Plate
3/8" Connector (by Others)
Live End
Track Unit
Conduit
Adaptor
3" or 4" Octagon Outlet Box (by others)
This end may be field cut.
Stem 1/4"-18 NPSM Thread
Clamp Set
Track
3" or 4" Octagon Outlet Box (by others)
0-90 Ceiling Slope
This end may be field cut.
Stem 1/4"-18 NPSM Thread
Clamp Set
Track
Stem mounts to track
not feed connector.
Not recommended for wall mounting.
Stem mounts to track not feed connector.
Matte White 7584 7586
Matte Black 7683 7681
7480 Matte White 7481 Matte Black
7582 Matte White 7680 Matte Black
6054NWH Matte White 6054NBK Matte Black 6054NAL Aluminum
6046NWH Matte White 6046NBK Matte Black 6046NAL Aluminum
Track Mounting and Power Feed Systems
Basic Lytespan
®
1 Circuit Track 6000
Lightolier is a Philips group brand
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0908
Basic Lytespan
Floating Invisible Feed
Can be mounted anywhere along the track at a maximum distance of 4' from edge of track extrusion. Accepts conduit or cable with 3/8" or 1/2" electrical connector (by others) . Can be used with Live End, "L", "T", "X", and In-Line and Variable Angle connectors. Use Track Mounting Clips to mount the track.
26082 Zinc Plated
"X" Connector
The "X" connector is not pre-wired or polarized. Used to make "X" pattern with track. 12 ga. copper jumper wires supplied to make all necessary connections. KO permits
direct feed with electrical connector.
3/8" Electrical
Fitting
(by others)
Clamp Set
Track
Wire Cover
Ceiling to Wall
Wall
Inside
Corner
Wall
Outside
Corner
Live End
Energizes Track from the beginning of a run. KO permits direct feed with electrical connector. It is included with Individual Track Units. Use with plain track units.
Variable Angle Connector
The Variable Angle Connector is pre-wired and polarized. It contains a die-cast zinc nut which accepts a standard 3/8" threaded conduit fitting. Flexes to any angle between 0-90.
"L" Connector
The "L" connector is polarized and pre-wired. It may be rotated for right angle or left angle turn. KO permits direct feed with electrical
connector.
Mini-Coupler
Used to connect two pieces of track together mechanically and electrically. Power cannot be fed to the Mini-Coupler. It is included with Joiner Track Units.
"T" Connector
The "T" connector is not pre-wired or polarized. Used to make "T" pattern with track. 12 ga. copper jumper wires supplied to make all necessary connections. KO permits
direct feed with electrical connector.
Cord and Plug
Energizes track from a polarized 120V receptacle. Especially useful with plain track. Supplied with a 15' two conductor 18 ga. cord and In-Line switch. The switch is supplied unattached. The track is not to exceed 1200 watts. The switch is rated for 6 amps, 720 watt with cord and plug attached.
6062WH Matte White 6062BK Matte Black
7-1/4"
0-270
2-5/8"
4-1/8"
4-1/8"
Track Unit
Mini-Coupler
Track Unit
Coupler Screws
Bottom Cover
Screw
Track Unit
Live End
2-3/4"
Knock Out
6053WH Matte White 6053BK Matte Black 6053NAL Aluminum
6048NWH Matte White 6048NBK Matte Black 6048NAL Aluminum
6049NWH Matte White 6049NBK Matte Black 6049NAL Aluminum
6050NWH Matte White 6050NBK Matte Black 6050NAL Aluminum
6051NWH Matte White 6051NBK Matte Black 6051NAL Aluminum
6052NWH Matte White 6052NBK Matte Black 6052NAL Aluminum
Page 4 of 4
Track Mounting, Power Feed Systems and Mounting Patterns
®
1 Circuit Track 6000
Lightolier is a Philips group brand
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0908
Loading...