Lightolier 4SB224 User Manual

45°

6

5

4

3

A

B

C

Pendant Dia.

Architectural Decorative 4SB224

(28) (35) (42)

Page 1 of 1 Pendalux Suspension Multiple Stem Swivel Basic Canopy

Job Information Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
©2005 Genlyte Group LLC • B0305

Specifications

1. Suspension Size: For optimum performance, testing recommends luminaire

total OAL (overall length) in proportion to the Body diameter. For close-to­ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the
diffuser to ceiling plane.

2. Stem Wires: Equipped with 120” of leads with keyed connectors for quick
connection to Body wiring.

3. Suspension: Swivel (central) stem, 5/8” steel tube. Die-Cast Ball hanger
attached.

4. Multiple Stems: 3/8” Steel outer pipe stems go into a
collector plate. Outer stems surround central 5/8” stem.

5. Mounting Strap (Cross Bar): Die-formed galvanized steel.

6. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball

hanger on stem that fits into cross bar allows installation on ceilings with
slope up to 45 degrees. Complies with California Earthquake Code.

7. Cutting Jig: All suspensions are equipped with a Patent Pending cutting
jig that simplifies cutting of center stem pipe in the field.

Options & Accessories

If a longer overall length is desired, use a Suspension paired with a larger Body.
If an overall length of greater than 42" is desired, use an Extension Stem. Order

as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.

Complete Luminaire consists of Body and Suspension: Order each separately.

Multiple Stem Suspension, with Swivel, Basic Canopy.

Catalogue Nominal Overall Nominal Suspension (Center Stem)
Number Length (A)* Length (B)* and Canopy Finish

4SB224PB 17 7/8” 13 3/8” Polished Brass
4SB224SB 17 7/8” 13 3/8” Satin Brass
4SB224SN 17 7/8” 13 3/8” Satin Nickel
4SB224WH 17 7/8” 13 3/8” White

4SB228PB 21 11/16” 16 1/4” Polished Brass
4SB228SB 21 11/16” 16 1/4” Satin Brass
4SB228SN 21 11/16” 16 1/4” Satin Nickel
4SB228WH 21 11/16” 16 1/4” White

4SB235PB 27 5/16” 20 1/2” Polished Brass
4SB235SB 27 5/16” 20 1/2” Satin Brass
4SB235SN 27 5/16” 20 1/2” Satin Nickel
4SB235WH 27 5/16” 20 1/2” White

4SB242PB 32 5/8” 24 1/2” Polished Brass
4SB242SB 32 5/8” 24 1/2” Satin Brass
4SB042SN 32 5/8” 24 1/2” Satin Nickel
4SB042WH 32 5/8” 24 1/2” White

* Add this length (A) to Body length (C) from Body Spec Sheet(s) to get Total Luminaire Nominal OAL.

Mounting

Mounts directly to 4" outlet box, using crossbar hanger, supplied.
Note: Additional Luminaire support plate provided with 35/42”Dia. Body to

allow Luminaire to be supported independent of outlet box.

Labels

cULus Listed, suitable for Damp Locations.