Lightolier 4SB124 User Manual

45°

5

4

3

21"

21"

Nominal

Luminaire OAL

Body Dia.

A

C

Architectural Decorative 4SB124

(28) (35) (42)

Page 1 of 1 Pendalux Suspension Single Swivel Stem Basic Canopy

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier a Genlyte Thomas Company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902

Specifications

1. Suspension Size: For optimum performance, testing recommends luminaire

total OAL (overall length) in proportion to the Body diameter. For close-to­ceiling mounting, it is suggested to use shorter single stems as noted on
Spec Sheet SB115. Total luminaire OAL is defined from the bottom of the dif­fuser to ceiling plane.

2. Stem Wires: Equipped with 120” of leads with keyed connectors for quick

connection to Body wiring.

3. Suspension: Swivel (central) stem, 5/8” steel tube. Die-Cast Ball hanger

attached.

4. Mounting Strap (Cross Bar): Die-formed galvanized steel.

5. Canopy: Steel, 7” diameter, fastened internally, no exposed hardware. Ball

hanger on stem that fits into cross bar allows installation on ceilings with
slope up to 45 degrees. Complies with California Earthquake Code.

6. Cutting Jig: All suspensions are equipped with a Patent Pending cutting jig

that simplifies cutting of center stem pipe in the field.

Options & Accessories

If a longer overall length is desired, use a Suspension paired with a larger Body.

If an overall length of greater than 42" is desired, use an Extension Stem. Order
as a third additional component to make complete fixture. Please see
Specification Sheet No. 4SXT.

Complete Luminaire consists of Body and Suspension: Order each separately.

Single Stem Suspension, with Swivel, Basic Canopy.

Catalogue Nominal Overall Suspension (Stem) and
Number Length (A)* Canopy Finish

4SB124PB 17 7/8” Polished Brass
4SB124SB 17 7/8” Satin Brass
4SB124SN 17 7/8” Satin Nickel
4SB124WH 17 7/8” White

4SB128PB 21 11/16” Polished Brass
4SB128SB 21 11/16” Satin Brass
4SB128SN 21 11/16” Satin Nickel
4SB128WH 21 11/16” White

4SB135PB 27 5/16” Polished Brass
4SB135SB 27 5/16” Satin Brass
4SB135SN 27 5/16” Satin Nickel
4SB135WH 27 5/16” White

4SB142PB 32 5/8” Polished Brass
4SB142SB 32 5/8” Satin Brass
4SB142SN 32 5/8” Satin Nickel
4SB142WH 32 5/8” White

* Add this length (A) to Body length (C) from Body spec sheet(s) to get Total Luminaire Nominal OAL.

Mounting

Mounts directly to 4" outlet box, using crossbar hanger, supplied.

Note: Additional Luminaire support plate provided with 35/42”Dia. Body to
allow Luminaire to be supported independent of outlet box.

Labels

cULus Listed, suitable for Damp Locations.