Lightolier 37000 User Manual

ProSpec

Plain Track

47-5/8"

95-5/8"

13/64"

Feed

4

1

2

3

1 3/16"

1 9/16"

5

13/64"

48"

96"

144"

™

277V Track Lighting 37000

Page 1 of 4 Track

Catalog No.

Finishes Plain Track

4' 8' 12'
Matte White 370 04WH 370 08WH 37012W H
Matte Black 370 04BK 370 08BK 37012BK

Features

1. Track: 6063T-5 structural aluminum extrusion; average wall thickness .08.

2. Conductor s: “U” shaped copper conductor, increases contact surface area

minimizes contact resistance provides reliable positive connection.

3. Insulated liner: .040” wall, high temperature extruded thermoplastic.

4. Toggle Bolts and Screws: furnished with track unit.

5. Dead End Cap: molded thermoplastic.

Mechanical

Track units plug together and lock securely to prevent accidental separation.
ProSpec™ track fix tures can be attached at any point along the track. Track units
may be field cut.

Electrical

(2) circuits. Each circuit is 277V, 60Hz, 20 AMP compatible. Each circuit has
dedicated neutral for maximum control flexibility. Track units are continuously
grounded throughout. Electrical conductors are concealed in an insulated liner
in the track. Intended for wiring to branch circuit building wire with ground, in

accordance with National and local codes.

Finish

All painted finishes are baked enamel.

Label

cUL, I.B.E.W.; Patent Pending

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier is a Philips group brand

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • A1008

ProSpec

Plain Track

7 Feed Track

47-5/8"

95-5/8"

143-5/8"

13/64"

13/64"

10

11

12

13

Feed

Feed

Feed

See Detail A ( pg 4)

4

1 3/16"

1 9/16"

5

13/64"

48"
96"

144"

™

277V Track Lighting 37000

Page 2 of 4 Track

Track Mounting and Power Feed Systems

Track Mounting Clips

3/8” Standof f Clips, order separately. Recommended
2 clips per 4’, 3 clips per 8’, 4 clips per 12’ track units.
Use additional clips for more suppor t in high load
applications. Toggle bolts are included.

Not recommended for wall mounting.

26478 WH Matte White (4) per pack.
26478BK Matte Black (4) per pack.

3/8"

Direct Mounting

Mount through existing holes in track. Top of track
sits flush to ceiling.

Recommended for wall and ceiling mounting.

Toggle Bolt

Nylon Spacer

Screw

Regressed Edge Panels

9/16” - 15/16” T-Bars
Clips or supplied assembled. Mounts easily onto
T-Bars by rotating clips. Use two per 4’ track, three
per 8’ and 12’ track.

6087 (9) Clips

9/16"

15/16"

6088 (9) Clips

1/8" &

1/4"

9/16"

T-Runner

Regressed
Edge Panel

Slotted Grid
Runner

5/16"

Grid Ceiling Canopy Kit (End & Floating)

For mounting the track to grid suspended ceilings.
Mounts to ceiling types shown above using clips
6087, 6088, or 6089 which are ordered separately.
Includes a special outlet box to fit onto runners.
Power can be fed to Feed Track, Live End, “L”, “T”,
“X”, In-Line connectors and Powertrip canopy ver­sion. Mounts along runner or at the intersection of
runners.

Surface Canopy Kit (End)

Canopy can be mounted directly over the live end,
in-line, ‘L’, ‘T’, and ‘X’ connectors. Canopy also can
be positioned anywhere on the track up to 4' from
edge of the track extrusion (floating feed, wire
cover included). Power can be fed into live end and
Powertrip only utilizing the floating feed option.
Canopy mounts to a 4” octagonal outlet box. Use
1/16” flush mounting clips (supplied with track) or
direct mount to ceiling or wall.

4" Octagon
Outlet Box
(by others)

Square Canopy

Live End
or Connector

Track

1/16" Flush
Mounting Clip

1/16" Flush Mount Clips

Nylon coated spring steel. Spaces track 1/16” from
ceiling. Recommended 2 per 4’, 3 per 8’, and 4 per 12’
track sections. Use additional clips for more support
when track is heavily loaded. Clips may be ordered

separated.

Not recommended for wall mounting.

56451WH Matte White (set of 10)
56451BK Matte BK (set of 10)

Grid Ceiling Mounting Clips

Square Edge Panels and 9/16” - 15/16” T-Bars Clip
is supplied assembled. Mounts easily onto T-Bars by
rotating clips. Use t wo per 4’ track, three per 8’ and

12” track.

6089 (9) Clips

T-Runner

Square
Edge Panel

9/16" - 15/16"

Lightolier is a Philips group brand

26096WH Matte White

26060WH Matte White

4" Octagon
Outlet Box
(by others)

T-Bar

T-Bar Mounting Clip

Live End Connector

Track

26060BK Matte Black

Standoff Canopy Kit (End)

For use with 26478WH, BK 3/8” standoff mounting
clips (ordered separately). Canopy can be mounted
directly over the live end, in-line, ‘L’, ‘T’, and ‘X’ con­nectors. Canopy also can be positioned anywhere on
the track up to 4' from edge of the track extrusion
(floating feed, wire cover included). Power can be fed
into live end and Powertrip only utilizing the floating
feed option. Canopy mounts to a 4” octagonal outlet
box. Use 1/16” flush mounting clips (supplied with
track) or direct mount to ceiling or wall.

26061WH Matte White
26061BK Matte Black

Job Information Type:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • A1008

ProSpec

3" or 4" Octagon

3/8" Connector

™

277V Track Lighting 37000

Page 3 of 4 Track

Track Mounting and Power Feed Systems

Stem Mounting Kits

Mounts to a 4” Octagon outlet box or surface.
Use two per 4’ track, three per 8’ and 12’ track.
When making a run of track do not exceed 4’
between stems. Use additional stems for addi­tional support.Can feed live end only. 8ft maxi­mum length of suspension. Stem can be field cut.

Not recommended for wall mounting.

18” Stem 48” Stem
Actual length for ceiling to top of track:
17 3/8” 47 3/8”

Matte White 7584 7586
Matte Black 76 83 7681

3" or 4" Octagon

Outlet Box
(by others)

This end may be

field cut.

Stem 1/4"-18

NPSM Thread

Clamp Set

Swivel Stem Mounting Kits

Adjusts from 0° to 90°. Can be field cut. 48”
stem. 8' maximum length of suspension. Can
feed live end only. Stem can be field cut.

7480 Matte White
7481 Matte Black

Stem Extension Kit

Mounts to any system kit to extend its length to 48”.

Cannot be field cut.

7582 Matte White
7680 Matte Black

Stem Extension
1/2" O.D. Steel

Tube
1/4 - 18 NPSM

Thread.

Clamp Set

Powerfeed Cord 10'

To be used with stems or
cables. (3) 12ga wires and
(1) 12ga ground. Fiber glass
jacket white or black. Can

be field shortened. Not a

mechanical support. Can

feed into all connectors.

37310W H White
37310BK Black

.295"

Cable Suspension Kit

Maximum distance
between suspension
cables is 8ft.

372 05 Black/White
37210 Black/White
372 20 Black/White

.062 Dia

Steel Cable

.295"

Cable length
adjuster

Live End Feed Connector (Live End)

Feeds power at either end of track. Not polarized.

Can be fed directly from surface or from ceiling using
a 3/8” or 1/2” electrical connector (by others).

370 46WH Matte White
370 46BK Matte Black

4-3/16"

3-1/8"

1-3/16"

5-7/8"

Line
Joint

See Detail A
(pg. 4)

Live End

Over Beam or Through Beam

3/8"
Connector

Track

Live End
Connector

Wall

Beam

Jump

Track

Live End
Connector

Outlet Box
(by others)

0° - 90° Ceiling
Slope

This end may be
field cut.

Stem 1/4"-18
NPSM Thread

Clamp Set

Lightolier is a Philips group brand

Cable Power Feed for
Suspended Mounting

(3) 12ga wires and (1) 12ga ground. Fiber glass jacket
white or black. Can be field shortened. Can feed into

all connectors.

370 05WH/BK ProSpec 277V, 2 Circuit, 20A Power
Feed for Suspended Mtg. 5', White/Black

37010W H/ BK ProSpec 277V, 2 Circuit, 20A Power
Feed for Suspended Mtg. 10', White/Black

37015WH/ BK ProSpec 277V, 2 Circuit, 20A Power
Feed for Suspended Mtg. 20', White/Black

.062 Dia

Steel Cable

Job Information Type:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • A1008

Through Wall or Column

Track

Live End
Connector

Wall

Jump (Conduit)

Track

Live End
Connector

ProSpec

™

277V Track Lighting 37000

Page 4 of 4 Track

Feed Connections for Surface, Cable and Stem Mounted Patterns

All connectors can be fed directly from above using a 3/8” or 1/2” electrical connector (by others).

“L” Connector

The “L” connector is pre-wired.
Not polarized.

370 50WH Matte White
370 50BK Matte Black

4.18"

3.59"

5 1/4"

Extruded Aluminum Housing

See Detail A
Typ. for all Track
Connections

Invisible Coupler

Used to connect t wo pieces of track together

mechanically and electrically. Power cannot be feed
into the mini-coupler.

370 49WH Matte White
370 49BK Matte Black

“T” Connector

The “T” connector is not pre-wired or
polarized. Used to make “T” pattern with

track. 12ga. copper jumper wires supplied
to make all necessar y connections.

370 51WH Matte White
370 51BK Matte Black

3.59"

5 1/4"

Extrude d Aluminum Housing

“X” Connector

The “X” connector is not pre-wired. Used to make
“X” pattern with track. 12ga. copper jumper wires
supplied to make all necessar y

connections. Not polarized.

370 52WH Matte White
370 52BK Matte Black

7 3/16"

3.59"

10 9/16"

3.59"

7 3/16"

NEUT

NEUT

See Detail A
Typ. for all Track
Connections

See Detail A
Typ. for all Track
Connections

10 9/16"

Detail A

Use 12ga. solid copper wire for feed

connections including ground.

Two wires may be
attached to one
screw terminal.

Extruded Aluminum Housing

In-Line Connector

Permits power feed-in between
track units in a straight run of
track. The “In-Line” connector
is pre-wired. Not polarized.

370 54WH Matte White
370 54BK Matte Black

Extruded
Aluminum
Housing

Lightolier is a Philips group brand

6.44"

6 3/16"

NEUT

NEUT

3 3/32"

See Detail A
Typ. for all Track
Connections

Job Information Type:

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

www.lightolier.com © 2008 Philips Group • A1008