Lightolier 27, G40 User Manual

2-5/8"

(67mm)

14" (356mm)

5" (127mm)

31/32"

(25mm)

2-11/32"

(59mm)

7/8"
Dia. K.O.'s

32" (813mm)

39-5/8" (1006mm)

44-1/16" (1119mm)

48-3/4" (1238mm)

DOMINAIRE II WB SERIES 232/432

Page 1 of 2 SURFACE WRAPAROUND FLUORESCENT, 14" WIDE x 2 5/8" DEEP x 48" LENGTH

2 OR 4 LAMP, T8 OR T12

Features Dimensions

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 3A/Folio H90-13 Rev. B

Features

• Step back housing for an apparent depth of 1 1/2".

• Completely assembled with setup ends to lamp holders.

• Only 3" total depth.

• Prismatic virgin acrylic lens – 14" wide.

•Efficiency 70.1%.

• Luminous catadioptic end caps.

•Two side self-leveling lens hinging.

• Zip-clip flush mount on T-grid ceilings.

•Off center 7/8" K.O. for flush mount to T-grid ceiling.

• Optional UL-Listed low density mounting spacers.

Ordering Information Explanation of Catalog Number. Example: WB4B432120O4GLR

4

B

FIXTURE
LENGTH:

4=4' Length

LAMP

QUANTITY

2 or 4 Lamps

LAMP
32=T8 Lamp
34=T12 Lamp

VOLTAGE:

120 or 277

BALLAST TYPE:

1&2 Lamp Mag. T12 LE

<20THD <10THD

1&2 Lamp Elec. T8 SO* H

I*

1-4 Lamp Elec. T8 O4* H4*
LOL T8 Dimming PS* –

*Instant Start Standard

OPTIONS:

Add appropriate
suffix to catalog

no., ie: (GLR)

WB

LER = FS - 71.0 Watts - 84.4 BF - 0.87
Comparative yearly lighting energy cost per 1000 lumens = $3.38

FIXTURE

WIDTH:

B=14" Wide

DOMINAIRE II:

Surface Wrap

Fluorescent

With White Body

Photometry Model No. WB4B432120O4

coefficients of utilization — zonal cavity method

RF 20 20 20
RC 80 50 30

RW 70 50 30 50 30 10 50 30 10

1767371 686664 646361
2706581 605755 585553
3655853 545047 524946
4605247 494441 474340
5554741 443935 423835
6514236 393531` 38 34 30
7473832 363127 343027
8433428 322724 312623
9403125 292421 282320

10 37 28 22 26 21 18 25 21 18

visual comfort probability (VCP) average 100 fc; reflectances 80/50/20

room size ceiling height ceiling height
WL8.5 10.0 13.0 16.0 8.5 10.0 13.0 16.0
20 20 53 58 64 71 54 59 65 71

20 30 47 50 55 61 47 51 57 62
20 40 43 46 49 54 44 47 51 56
20 60 40 42 45 48 41 44 46 50

30 20 55 59 64 69 55 60 64 69
30 30 48 51 54 59 48 51 55 60
30 40 44 46 49 52 44 46 50 53
30 60 40 42 43 46 41 43 45 48
30 80 39 41 41 43 39 41 42 45

40 20 57 61 65 69 57 61 65 69
40 30 49 52 55 59 50 53 56 60
40 40 45 47 49 52 46 48 50 53
40 60 42 43 44 46 42 44 45 47
40 80 40 41 41 43 40 42 42 44
40 100 39 40 39 41 39 41 40 42

60 30 51 54 55 60 51 54 57 60
60 40 47 48 50 52 47 49 50 53
60 60 43 44 44 47 43 44 45 47
60 80 41 42 41 43 41 42 42 44
60 100 40 40 39 41 39 41 40 42

100 40 50 52 52 55 51 52 53 56
100 60 46 47 47 49 46 47 47 50
100 80 44 44 43 45 43 45 44 46
100 100 42 42 41 43 42 43 42 43

room cavity ratio

luminaries lengthwise

luminaries crosswise

Options/Accessories

CANOPY SPACER: Spacer suspends fixture approximately 1 1/2" from surface.
Order Catalog Number: AC1 CSP.
STEM AND CANOPY SETS: Suspends fixture 6", 12", 18" or 24" from surface.
Order Catalog Number: ASC6 CSP (6"), ASC12 CSP (12"), ASC18 CSP (18"),
ASC24 CSP (24").

When stem mounting two or four lamp fixtures in continuous rows, umits must
be coupled with nuts and bolts (by others) at end of fixture. Stem and canopy
sets not recommended for three lamp fixtures. Other lengths are available.
Consult factory.

ELECTRICAL/WIRING OPTIONS: Consult factory.
FUSING: Internal fast-blow fusing. SUFFIX: GLR.

Internal slow-blow fusing. SUFFIX: GMF.

Specifications

PERFORMANCE: In an installation of 4 lamp 32W luminaires in a room cavity

ratio of 1, with reflectance of 80% ceiling, 50% wall, 20% floor, the C.U. shall
not be less than .73. To reduce glare the VCP shall be not less than 43 either
lengthwise or crosswise (at 100fc level) and the average brightness at 65° shall
not exceed 979 footlamberts To prevent veiling reflections, luminaire output in
the 30°-90° zone shall not be less than 65.7%.

Specifications (continued)

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel.
FINISH: Chassis exterior–white baked polyester enamel. Cavity– white baked

polyester enamel minimum 86% reflectance. Phosphate undercoating.

LENS: One-piece extruded virgin acrylic prismatic bottom and side walls.
END CAPS: Injection molded catadioptic end caps separate from lens.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB.

If K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W. UL and ULc Listed.

WB4B432120O4

FOUR F32 T8, EACH RATED 2859 LUMENS

REL-2P32-SC

DOMINAIRE II WB SERIES 232/432

Page 2 of 2 SURFACE WRAPAROUND FLUORESCENT, 14" WIDE x 2 5/8" DEEP x 48" LENGTH

2 OR 4 LAMP, T8 OR T12

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 3A/Folio H90-13 Rev. B

Job Information Type: