Lightolier 2002P1 User Manual

Lytecaster
®
Recessed Downlighting 2002P1
Page 1 of 1 3 3/4" Aperture Incandescent Standard Frame-In Kit
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Specular Cone Satin Baffles Pinhole Wall Open Wet Enclosed Reflector Cone Washer Location Wet Location
2002P1 2045 2012 2008 2005 2011 2095 2084CD 2090
2046 2012NM 2010NM 2005BNM 2096 2084WH 2046CD 2013 2010 2005NM 2096CD
2013NM 2008NM 2005WH 2013BKNM 2013BK 2013CD 2013CDNM 2013WH
Features
1. Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1" thick. Push-in/twist-out rotoclips hold reflector flush to ceiling.
3. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to 27" with integral nailing tabs. Attaches to wood joist without need of accessories.
4. Socket Housing: Aluminum or galvanized steel.
5. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be kept 3" away from fixture sides and wiring compartments and must not be placed above fixture in a manner which will entrap heat.
®
Options & Accessories
Mounting Bars: 1964 - 20" set of (2) T-Bar Ceiling Clips: 1956 - set of (4) Plaster Ceiling Ring: 1960 - 7/8" depth for wet plaster ceilings. 277V Remote Step-Down 7997 - 277V down to 120V Transformer: 300W maximum load
Labels
UL (Suitable for Damp Locations), I.B.E.W.
®
is a registered trademark of General Cable Industies Inc.
Romex
US Patent No.: 5,045,985
Job Information Type:
Job Name: Cat. No.:
Lamp(s): Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2006 Genlyte Group LLC • F0806
Loading...