Lightolier 1920LV User Manual
Lytecaster
®
Recessed Downlighting 1920LV
Page 1 of 1 5" Aperture MR16 Low Voltage Conversion Kit
1
2
4
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Conversion Kit Compatible Incandescent
Frame-in Kits
1920LV 1002P1 1000IC
1003R 1000AICM
Features
1. Transformer Housing: 0.036" (#20 ga.) steel. Matte black finish.
2. Transformer: Magnetic, 120V primary, nominal 12V secondary.
3. Socket: Field replacable. Two-pin socket, pre-wired with #18 SF1 leads.
4. Socket Adaptor: Medium base; nickel-plated screw shell. Pre-wired with
#18 ga. SF1 leads. Screws into previously installed Lytecaster® incandescent
Frame-in Kits to energize conversion kit.
5. Socket Housing: 0.036" (#20 ga.) galvanized steel.
Compatible Reflector Trims —
See Individual Reflector Trim Specification Sheets
Step Baffle Aperture Cone Pinhole Elbow
1055LV
1055WHLV
Options & Accessories
MR16 Replacement Socket: 1975 A
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Adjustable
1063LV 1064WDLV
1064LV 1064WDPLV
5
3
1052LV 1062LV
Dimming Information
Dimming Controls: use only dimmers specifically designed for use with magnetic
transformers, like Lightolier Onset® or Sunrise® series LV or VA dimmers, or any
Lightolier Controls dimming system. Low voltage fixtures may produce audible
sound when used with dimmers, which may be objectionable in acoustically criti-
cal areas.
Lightolier is a Philips group brand
Lytecaster® is a registered trademark of Lightolier.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D1108
Loading...