Lightolier 1100AICM User Manual
Lytecaster
®
Recessed Downlighting 1100AICM
Page 1 of 1 6 3/4” Aperture Incandescent Insulated Ceiling, AirSeal® Frame-In Kit
15 1/2"
7 5/16"
9"
6 13/16" Dia.
Ceiling Opening
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Complete Fixture consists of REFL6ECTOR TRIM & FRAME-IN-KIT. Select each separately.
11 1/8"
5
6
Downlighting
1
7
3
4
2
0194
FRAME- IN KIT
REFLEC TOR TRIM
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
1100AICM
Reflector Satin
Cone
1143
1144
1144CD
1108
1108NM
1110
1110NM
Cone:
1112
1112NM
1113
1113BK
1113WH
1113CD
1113NM
1113BKNM
1113CDNM
Open Downlight Adjustable
Sloped
Ceiling
1131
1131WH
1131GD
1131CL
1131BK
1133
1133WH
1133GD
Baffles Basic
White
1105
1105WH
1170M1
1171
1105NM
1105BNM
1176
1176WH
1179M1
1179WH
Cross
Recessed
Blade
Line Volt.
1132 1129NM
1129
1129CD
1129CDNM
1129WH
1129CL
1129GD
1129BK
1133CL
1133BK
1154
1154WH
1154BK
1154GD
1154CL
1154CD
Eyeball
1122
1123
1182
1122WH
1123WH
Recessed
Low Volt.
1155
1155WH
1161
1161WH
1163
1164
Enclosed
Diffusers
1121
1124
1126
1128
1134
1177SH
1178SH
1190
Open Wet
Location
1184CD
1184WH
Wall
Washer
1185
1186
1186WH
Features
1. Housing: 0.026” galvanized steel. UL listed for direct contact with thermal
insulation. AirSeal® housing minimizes air leakage to less than 2 CFM at
1.57 PSF, which complies with Model Energy Code (Section 602.3.3) and the
Washington State Energy Code (Section 502.4) and reduces heat loss and
condensation in ceiling. Access door for inspection of junction box.
2. Mounting Frame: 0.036 (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1” thick. 3/8” deep integral lip. Four slots are positioned 90°
apart to simplify alignment. Push-in/twist-out rotoclips hold reflector flush
to ceiling.
3. Junction Box: 2” X 4” X 4”: 0.063” (#14 ga.) galvanized steel. UL listed for
maximum of 6 No. 12 ga., 90° C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside
of housing allows easy inspection of wiring without removal of housing.
Integral cable clamps permit attachment of nonmetallic Romex® or armored
cable without the need for additional connectors.
4. Mounting Bars: 0.059” (#16 ga.) galvanized steel. 13” long bars extend to
27”, rotatable and lockable, with integral T-bar tabs. Attach to wood joist or
T-bar ceilings without need of accessories.
5. Socket Housing: Impact extruded aluminum or galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector: Meets NEC and UL requirements. Located inside
housing.
Options & Accessories
Mounting Bars: 1976 - 13” set of (4).
Extra-Thick Ceiling Mounting Ring: 1967A - up to 2” thick ceilings
Labels
UL Type I.C. (Suitable for Damp Locations);
Complies with Air Leakage Requirements as stated in the Model Energy Code,
California Title 24 and the Washington State Energy Code.
AirSeal® is a registered trademark of Lightolier
Romex® is a registered trademark of General Cable Industries Inc.
US Patent Numbers: 5,045,985; 4,751,624
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • D0906
Loading...