Lightolier 1002P1 User Manual
Lytecaster Recessed Downlighting 1002P1
Page 1 of 1 5" Aperture Incandescent Standard Frame-In Kit
3
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
1
Ceiling Opening
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight Recessed
Satin Baffles Basic Pinhole Adjustable Eyeball Enclosed Wall Open
Reflector Cone Cone White Diffusers Washer Wet Location
1002P1 1045 1012 1008 1005 1071 1011 1027 1023 1024 1035 1084CD
1046 1012NM 1008NM 1005WH 1027BK 1023WH 1078 1035WH 1084WH
1046CD 1013 1010 1005NM 1027WH 1082 1090 1085
1013NM 1010NM 1005BNM 1027CD 1022 1021 1095
1013BK 1076 1027NM 1022WH 1096
1013BKNM 1076WH 1027BNM 1096CD
1013CD 1027BKNM
1013CDNM 1027CDNM
1038
1038NM
1048
1048NM
6
2
5
4
Features
1. Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all ceilings
up to 1" thick. Four slots are positioned 90° apart to simplify alignment. Push-in/
twist-out rotoclips hold reflector flush to ceiling.
2. Junction Box: 4" x 3 1/2” x 2”; .063" (#14 ga.) galvanized steel. U.L. listed for
maximum of 8 No. 12 ga. 75° C through branch circuit conductors (60° C end
of run). Integral cable clamps permit attachment of nonmetallic Romex® or
armored cable without need of additional connectors.
3. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to 27"
with integral nailing tabs. Attaches to wood joist without need of accessories.
4. Socket Housing: Impact extruded aluminum or galvanized steel.
5. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with #18
ga. SF1 leads to junction box.
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be kept
3“ away from fixture sides and wiring compartments and must not be placed
above fixture in a manner which will entrap heat.
Options & Accessories
Mounting Bars: 1964 - 20" set of (2)
T-Bar Anchor Clips: 1956 - set of (4)
Plaster Ceiling Ring: 1960 - 7/8" depth for wet plaster ceilings.
Extra-Thick Ceiling
Mounting Ring: 1967B - up to 2" thick ceilings.
277V Remote Step-Down
Transformer: 7997 - 277V down to 120V
300W max. load.
Lightolier is a Philips group brand
Options & Accessories (continued)
Remodeler Anchor Clip: 1985N
Conversion Kit 1910CKU - Reference conversion kit
specification sheet for trim and lamp options.
Labels
UL (Suitable for Damp Locations), I.B.E.W.;
Romex® is a registered trademark of General Cable Industries Inc.
US Patent No's.: 5,045,985
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • I1008
Loading...