Lightolier 1000P1 User Manual

Lytecaster ® Recessed Downlighting 1000P1

Page 1 of 1 5" Aperture Incandescent Standard Frame-In Kit

14”

Ceiling Opening

Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets

Open Downlight

1000P1 Satin Baffles Basic Pinhole Adjustable Eyeball
Reflector Cone Cone White

1045 1012 1008 1005 1071 1011 1029 1082 1021 1035
1046 1012NM 1008NM 1005NM 1029NM 1023 1024 1035WH
1046CD 1013 1010 1005BNM 1029BK 1023WH 1078 1085
1013NM 1010NM 1005WH 1029BKNM
1013CD 1076 1029CD
1013BKNM 1076WH 1029CDNM
1013CDNM 1029CL
1013BK 1029CLNM
1013WH 1029GD
1029GDNM
1029BNM

PAR30 lamps do not require socket extender. Long neck PAR30 lamps are not compatible with the 1029 series trims.

Enclosed
Diffusers

Wall

Washer

Features

1. Housing: .026" galvanized steel. Access door for inspection of junction box.

2. Mounting Frame: .036” (#20 ga.) galvanized steel. Accommodates all

ceilings up to 1" thick. Four slots are positioned 90° apart to simplify
alignment. Push-in/twist-out rotoclips hold reflector flush to ceiling.

3. Junction Box: 4" X 3 1/2" X 2" (22 cu. in.) .063" (#14 ga.) galvanized
steel. U.L. listed for maximum of 8 No. 12 ga. 75° C through branch circuit
conductors (60° C end of run). Integral cable clamps permit attachment
of non-metallic Romex® or armored cable without need of additional
connectors.

4. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to
27", rotatable and lockable, with integral T-bar tabs. Attach to wood joist or
T-bar ceilings without the need of accessories.

5. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.

6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat. Located inside housing.

Options & Accessories

Mounting Bars: 1964 - 20" set of (2)
Plaster Ceiling Ring: 1960 - 7 /8" depth for wet plaster ceilings.
Extra-Thick Ceiling
Mounting Ring: 1967B - up to 2" thick ceilings.

Labels

UL (Suitable for Damp Locations), I.B.E.W.

Romex® is a registered Trademark of General Cable Industries Inc.

US Patent No's.: 5,045,985

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • H0906