Lightolier 1000IC User Manual

Lytecaster

®

Recessed Downlighting 1000IC

Page 1 of 1 5" Aperture Incandescent Insulated Ceiling Frame-In Kit

Ceiling

Opening

*

Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.

Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets

Open Downlight Recessed

Satin Basic Enclosed Open Wall
Reflector Cone Cone Baffles White Adjustable Eyeball Diffusers Wet Location Washer

1000IC 1045 1012 1008 1005 1071 1027 1029 1022 1021 1084CD 1035
1000ICM* 1046 1012NM 1008NM 1005NM 1027CD 1029CD 1022WH 1024 1084WH 1035WH
1046CD 1013 1010 1005BNM 1027NM 1029NM 1023 1078 1085
1013CD 1010NM 1005WH 1027CDNM 1029CDNM 1023WH 1090 1095
1013BK 1076 1027BK 1029BKNM 1082 1096
1013WH 1076WH 1027BKNM 1029GDNM 1096CD
1013NM 1027WH 1029CLNM
1013CDNM 1038 1029CL
1013BKNM 1038NM 1029GD
1048 1029BK
1048NM 1029WH

*3/8” Integral Plaster Lip 1029BNM

Features

1. Housing: .026" (#20 ga.) galvanized steel. U.L. listed for direct contact with

thermal insulation. Access door for inspection of junction box.

2. Mounting Frame: .036” (#20 ga.) galvanized steel. Accommodates all

ceilings up to 1” thick. ICM version has 3/8" deep integral lip. Four slots are
positioned 90º apart to simplify alignment. Push-in/twist-out rotoclips hold
reflector flush to ceiling.

3. Junction Box: 2" x 4" x 4", .063" (#14 ga.) galvanized steel. U.L. listed for,

maximum of 6 No. 12 ga., 90º C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside of
housing allows easy inspection of wiring without removal of housing. Integral
cable clamps permit attachment of nonmetallic Romex® or armored cable
without the need for additional connectors.

4. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to

27", rotatable and lockable, with integral T-bar tabs. Attach to wood joist or
T-bar ceilings without need of accessories.

5. Socket Housing: Impact extruded aluminum or galvanized steel.

6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with

#18 ga. SF1 leads to junction box.

7. Thermal Protector: Meets NEC and U.L. requirements. Located inside

housing.

Options & Accessories

Mounting Bars: 1964 - 20" set of (2)
T-Bar Ceiling Clips: 1956 - set pf (4)
Plaster Ceiling Ring: 1960 - 7/8" depth for wet plaster ceilings.
Not for use with ICM housing.

Options & Accessories (continued)

Extra-Thick Ceiling
Mounting Ring: 1967B - up to 2" thick ceilings.
277 Remove Step-Down Transformer 7997 - 277Vdown to 120V

300W max.load.

Labels

UL (Type I.C., Suitable for Damp Locations), I.B.E.W.

Romex® is a registered Trademark of General Cable Industries Inc.

US Patent No.: 5,045,985; 4,751,624

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):
Notes:

Lightolier a Genlyte company www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC •G0906