Lightolier 1000AICM User Manual
Lytecaster
®
Recessed Downlighting 1000AICM
Page 1 of 1 5" Aperture Incandescent Insulated Ceiling, AirSeal® Frame-In Kit
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight Recessed
Satin Basic Enclosed Open Wall
Reflector Cone Cone Baffles White Adjustable Eyeball Diffusers Wet Location Washer
1000AICM 1045 1012 1008 1005 1071 1027 1029 1022 1021 1084CD 1035
1046 1012NM 1008NM 1005NM 1027CD 1029CD 1022WH 1024 1084WH 1035WH
1046CD 1013 1010 1005BNM 1027NM 1029NM 1023 1090 1085
1013CD 1010NM 1005WH 1027CDNM 1029CDNM 1023WH
1013BK 1076 1027BKNM 1029BKNM 1082
1013WH 1076WH 1027WH 1029GDNM
1013NM 1038 1029CLNM
1013CDNM 1038NM 1029CL
1013BKNM 1048 1029GD
1048NM 1029BK
1029BNM 1029WH
Features
1. Housing: .026" (#20 ga.) galvanized steel. U.L. listed for direct contact with
thermal insulation. AirSeal housing minimizes air leakage to less than 2 CFM
at 1.57 psf, which complies with Washington State Energy Code (Section
502.4) and reduces heat loss and condensation on ceiling. Access door for
inspection of junction box.
2. Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1" thick. 3/8" deep integral lip. Four slots are positioned 90º
apart to simplify alignment. Push-in/twist-out rotoclips hold reflector flush to
ceiling.
3. Junction Box: 2" x 4" x 4", .060" (#14 ga.) galvanized steel. U.L. listed for,
maximum of 6 No. 12 ga., 90º C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside of
housing allows easy inspection of wiring without removal of housing. Integral
cable clamps permit attachment of nonmetallic Romex® or armored cable
without the need for additional connectors.
4. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to 27",
rotatable and lockable, with integral T-bar tabs.
5. Socket Housing: Impact extruded aluminum or galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
7. Thermal Protector: Meets NEC and U.L. requirements. Located inside housing
Options & Accessories
Mounting Bars: 1964 - 20" set of (2)
T-Bar Ceiling Clips: 1956 - set of (4)
Options & Accessories (continued)
Extra-Thick Ceiling
Mounting Ring: 1967B - 1 1/4” to 2" thick ceilings.
277V Remote Step-Down
Transformer: 7997 - 277V down to 120V
300W max. load.
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Romex® is a registered Trademark of General Cable Industries Inc.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • F0806
Loading...