LightHeaded 20249, 20250, 20277, 20157, 20261 Assembly Instructions Manual
...
“Canterbury” LightHeaded™ Bed
Assembly Instructions
www.LightHeadedBeds.com
Model #20249Twin size, Chestnut
Model #20277Twin size, Black
Model #20250 Twin size, White
9/17/2015
1168356 B
Before you begin:
• Consider enlisting a family member or friend to help; it will make assembly easier,
faster, and more fun.
• Layout all of the parts listed below.
• Save all packing materials until assembly is complete to avoid accidentally
discarding smaller parts or hardware.
• You will need a Phillips head screw driver (not included)
Parts List
Part Description Quantity
Blister Pack
EPX
Contains the hardware required to assemble your new Lightheaded Bed
1
EPJ
Metal washer
8
EPK
Metal lock washer
8
EPL
Machine screw
11
EPM
Wood screw
24
CWT
Allen wrench
1
EPN
LightHeaded™ headboard—ships with LightHeaded™ lighting component kit
already installed.
1
EQB
Caprail assembly
1
EPO
Right headboard leg
1
EPP
Left headboard leg
1
EPQ
Footboard
1
EPR
Right side rail
1
EPS
Left side rail
1
EPT
Roll-out slats (12 pieces of wood connected with nylon straps)
1
EPU
LightHeaded™ TechBox (contains remote control, power cord, instructions for
use and image changing, and most importantly your coupon code for $20) (see
separate LightHeaded™ Lighting Assembly Instructions)
1
Page 1
“Canterbury” LightHeaded™ Bed
Assembly Instructions
www.LightHeadedBeds.com
Model #20249Twin size, Chestnut
Model #20277Twin size, Black
Model #20250 Twin size, White
9/17/2015
1168356 B
Step 1
1. Orient the caprail (EQB) as shown, and insert the two dowels on each wood block into
the holes at the top of the headboard (EPN). The wood blocks should be flush with the
back surface of the headboard. The center hole of each set of three holes is reserved
for Step 2.
Wood blocks
Step 2
1. Insert one machine screw (EPL) into each wood block to secure the caprail to the headboard.
Wood block
EPL
EPL
EPL
EPN
EQB
Page 2
Loading...